{"title":"BMW M2 G87 Intercoolers","description":null,"products":[{"product_id":"csf-g8x-m2-m3-m4-s58-charge-air-cooler-manifold-8233","title":"CSF Charge-Air Cooler Manifold – BMW M2 \/ M3 \/ M4 (S58 G8x) #8233","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe CSF \"Level-Up\" Charge-Air-Cooler Manifold replaces the OEM S58 charge cooler and intake manifold assembly with a fully CNC-machined, TIG-welded billet aluminum unit. The factory part uses plastic tanks and a crimped-on gasket seal around a tube-and-fin core that is prone to failure above roughly 27 psi; the CSF manifold carries a custom bar-and-plate air-to-water core built by PWR and pressure tested to 120 psi, so it holds up at the boost levels a built S58 actually runs.\u003c\/p\u003e\n\u003cp\u003eCooling performance improves in both directions: intake air temperatures drop by roughly 30°F against OEM, heat-soak recovery is faster, and pressure drop across the core is lower, which puts less stress on the turbo system and allows more boost at higher target power levels. Core volume is 3,996cc against the OEM's 3,233cc — 23.6% more — and CSF measured average core efficiency of 89.06% versus 86.60% for the factory unit.\u003c\/p\u003e\n\u003cp\u003eThe manifold is built for tuners: an included extruded fuel rail supports top-feed port injection with individual bungs on each runner (CNC block-off caps supplied for non-use), individual nitrous\/methanol injection ports give per-runner spray control, an integrated sensor pad allows additional parameters to be measured, and integrated breather ports make bleeding air from the water side straightforward. The spin-off oil filter stays accessible, so the manifold does not need to come off for an oil change. A KIYLEX thermal rejection spacer is included, acting as a thermal barrier between the cylinder head and intake manifold and proven to lower intake manifold temperatures by up to 15%. Installation is true plug-and-play with OEM-level fit and finish, and no vehicle modifications are required.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom bar-and-plate air-to-water intercooler core manufactured by PWR\u003c\/li\u003e\n\u003cli\u003ePressure tested to 120 psi burst pressure (OEM tube\/fin core prone to failure above ~27 psi)\u003c\/li\u003e\n\u003cli\u003eCore volume 3,996.08cc vs. OEM 3,233.34cc — 23.6% greater\u003c\/li\u003e\n\u003cli\u003eApproximately 30°F reduction in intake air temperatures (IATs) compared to OEM\u003c\/li\u003e\n\u003cli\u003eAverage core efficiency 89.06% vs. OEM 86.60%\u003c\/li\u003e\n\u003cli\u003eLower pressure drop across the core than the OEM cooler\u003c\/li\u003e\n\u003cli\u003e100% TIG-welded CNC-machined billet aluminum construction replacing OEM plastic tanks and crimped-on gasket sealing\u003c\/li\u003e\n\u003cli\u003eIntegrated top-feed port injection with individual bungs on each cylinder runner\u003c\/li\u003e\n\u003cli\u003eIndividual nitrous\/methanol injection ports, one per runner\u003c\/li\u003e\n\u003cli\u003eIntegrated vacuum and sensor pad for measuring additional parameters\u003c\/li\u003e\n\u003cli\u003eIntegrated breather port for bleeding air from the water side of the manifold\u003c\/li\u003e\n\u003cli\u003eEasy access to the spin-off oil filter — no need to remove the manifold to change oil\u003c\/li\u003e\n\u003cli\u003eIncluded KIYLEX® thermal rejection manifold spacer, a patented high-performance final-stage polymer proven to lower intake manifold temperatures by up to 15%\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play \"drop-in fit\" — requires absolutely no modifications\u003c\/li\u003e\n\u003cli\u003eFinishes: raw billet aluminum, thermal black heat-dispersion coating, or custom finish to order\u003c\/li\u003e\n\u003cli\u003eOEM cross-reference: BMW 17-51-8-092-584 and 17-51-8-053-321\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty on the manifold assembly; CSF states a 2-year limited warranty from date of purchase by the original purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminum charge-air-cooler manifold assembly\u003c\/li\u003e\n\u003cli\u003ePWR bar-and-plate air-to-water intercooler core\u003c\/li\u003e\n\u003cli\u003eKIYLEX® thermal rejection manifold spacer\u003c\/li\u003e\n\u003cli\u003eExtruded fuel rail with top-feed port injection kit and CNC-machined block-off caps\u003c\/li\u003e\n\u003cli\u003eNitrous\/methanol injection port bungs\u003c\/li\u003e\n\u003cli\u003eOEM-style mounting brackets and hardware\u003c\/li\u003e\n\u003cli\u003eBleeder valve and quick-connect fittings\u003c\/li\u003e\n\u003cli\u003eAll necessary gaskets and fasteners\u003c\/li\u003e\n\u003cli\u003ePrinted installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e CSF specifies no additional hardware for this part — the manifold is a true plug-and-play replacement and ships with every bracket, gasket and fastener needed.\u003c\/li\u003e\n\u003cli\u003eCoolant for refilling and bleeding the low-temperature charge-cooling circuit after installation (installer supplied).\u003c\/li\u003e\n\u003cli\u003ePort injectors, fuel plumbing and nitrous\/methanol hardware are optional and are not included — the manifold ships with the injection ports plugged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCSF does not publish a downloadable installation PDF for this part. A complete printed installation guide is supplied in the box.\u003c\/li\u003e\n\u003cli\u003eInstallation requires no modification to the vehicle; the manifold mounts to the OEM locations and reuses the factory coolant connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCONTACT FOR OTHER FINISH OPTIONS.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eYear ranges follow CSF's current published application table for #8233, which lists the G87 M2 from 2023 (the previous store listing said 2022+) and closes the F97 X3M at 2024. Both 6MT and ZF8 automatic cars are covered. Confirm fitment for your specific chassis with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8233\u003c\/strong\u003e — raw billet aluminum finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8233B\u003c\/strong\u003e — thermal dispersion black heat-dispersion finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8233C\u003c\/strong\u003e — custom finish (made to order; contact Speed Logic)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 (incl. Competition, xDrive, CS)\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Touring (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eG81\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2022+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 (incl. Competition, xDrive, CSL)\u003c\/td\u003e\n\u003ctd\u003eG82\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible (incl. Competition xDrive)\u003c\/td\u003e\n\u003ctd\u003eG83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eF97\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2020–2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eF98\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"CSF Radiators","offers":[{"title":"Raw","offer_id":48809183510808,"sku":"8233","price":6599.0,"currency_code":"USD","in_stock":true},{"title":"Thermal Black Heat Dispersion","offer_id":48809183543576,"sku":"8233B","price":6995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/8233_30.jpg?v=1720572672"},{"product_id":"wagner-tuning-hybrid-carbon-intake-manifold-with-integrated-intercooler-bmw-m3-m4-s58-200001187","title":"Wagner Tuning Hybrid Carbon Intake Manifold w\/ Intercooler – BMW M3 \/ M4 (S58 G8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe WAGNERTUNING Hybrid-Carbon intake manifold with integrated intercooler is a high-performance upgrade for BMW M models running the S58 engine. It combines carbon with other materials for strength at reduced weight, and integrates a water-cooled intercooler directly into the manifold so charge air is cooled as close to the intake ports as possible.\u003c\/p\u003e\n\u003cp\u003eThe competition core inside the manifold was developed for the S58's demands and carries 50% more external core volume than the stock intercooler. CFD simulations were used to shape the CNC-milled end tanks, improving airflow and cutting back pressure, and the result is intake air temperatures up to 20 °C cooler with less heat soak during aggressive driving. Better cooling and airflow translate into more power and torque, and the assembly is robust enough for motorsport use.\u003c\/p\u003e\n\u003cp\u003eThe manifold carries a heat-conductive anti-corrosion coating for long service life, is built to handle high pressure, and installs plug and play without modification. It also includes preprocessed ports for additional fuel injection and 1\/8 NPT ports for extra measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"100%\" alt=\"Wagner Tuning 200001187 flow diagram\" src=\"http:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001187-Temp.jpg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: hybrid carbon intake manifold with integrated water-cooled intercooler\u003c\/li\u003e\n\u003cli\u003eCore volume: 50% greater than the stock intercooler\u003c\/li\u003e\n\u003cli\u003eIntake air temperature: up to 20 °C cooler than stock\u003c\/li\u003e\n\u003cli\u003eEnd tanks: CNC-milled, CFD-optimized\u003c\/li\u003e\n\u003cli\u003eCoating: heat-conductive anti-corrosion coating\u003c\/li\u003e\n\u003cli\u003eFueling: preprocessed ports for additional fuel injection (fuel rail available separately)\u003c\/li\u003e\n\u003cli\u003eMeasurement: 1\/8 NPT ports for additional sensors\u003c\/li\u003e\n\u003cli\u003eBuilt for high pressure resistance\u003c\/li\u003e\n\u003cli\u003eInstallation: plug and play, no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Hybrid-Carbon intake manifold with integrated intercooler\u003c\/li\u003e\n\u003cli\u003e1 x set of mounting hardware\u003c\/li\u003e\n\u003cli\u003e1 x installation instructions\u003c\/li\u003e\n\u003cli\u003e1 x combination approval certificate (Kombinationsgutachten)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Wagner Tuning specifies no additional hardware — the manifold installs plug and play using the supplied mounting material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional:\u003c\/strong\u003e a Wagner fuel rail is available separately if you intend to use the preprocessed ports for additional fuel injection.\u003c\/li\u003e\n\u003cli\u003eWagner quotes an installation time of roughly 60 work units (about 300 minutes).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/wagner-tuning-200001187-installation-instructions.pdf?v=1787185470\"\u003eWagner Tuning 200001187 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eWagner's installation instructions cover G80–G83, G87, F97 and F98 S58 applications, with model-specific notes for F9x and G8x cars. Confirm your chassis with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e200001187\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Touring\u003c\/td\u003e\n\u003ctd\u003eG81\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2022+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eG82\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eG83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M\u003c\/td\u003e\n\u003ctd\u003eF97\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M\u003c\/td\u003e\n\u003ctd\u003eF98\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":48983447470360,"sku":"200001187","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/200001187_3__29263.jpg?v=1724277373"},{"product_id":"mishimoto-performance-charge-air-cooler-manifold-fits-bmw-g8x-m3-m4-2021-mmint-g80-21bk","title":"Mishimoto Performance Charge-Air Cooler Manifold – BMW M3 \/ M4 (G8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Mishimoto Performance Charge Air Cooler Manifold replaces the factory air-to-water intercooler and intake manifold on the 2021+ BMW G8X M3 and M4 with a single cast-aluminum, TIG-welded assembly. A robust bar-and-plate core sits inside a manifold designed to handle boost pressures over 60 PSI, with flow and cooling capacity aimed at builds well beyond stock output.\u003c\/p\u003e\n\u003cp\u003eSerious power levels need serious fueling, so the manifold carries full provisions for port fuel injection: a billet fuel rail, precision-machined injector ports with optimized geometry for air\/fuel mixing, and anodized aluminum injector blanks to cap the ports when they are not in use. No drilling is required. The included PTFE -AN fuel lines and fittings are ethanol-compatible and tee into the factory fuel lines. Six additional nitrous ports accept 1\/8 or 1\/16 NPT nozzles and can be plugged when unused.\u003c\/p\u003e\n\u003cp\u003eFitment was designed to be stock-like. The kit includes brackets to keep wiring tidy, a mount for the factory engine cover and custom EVAP lines, and a cutout in the plenum gives easy access to the oil filter without affecting flow. Like all Mishimoto products it is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCast aluminum and TIG-welded manifold with bar-and-plate charge air cooler core\u003c\/li\u003e\n\u003cli\u003eCore dimensions: 9.8\" length × 6.3\" height × 4.9\" thick\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 21\" width × 13.1\" height × 11.5\" length\u003c\/li\u003e\n\u003cli\u003eMaximum boost pressure: 60 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum recommended horsepower: 1150\u003c\/li\u003e\n\u003cli\u003eBillet fuel rail with six precision-machined port injection ports; no drilling required\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum injector blanks cap unused injector ports\u003c\/li\u003e\n\u003cli\u003eEthanol-compatible PTFE -AN fuel lines and fittings that tee into the stock fuel lines\u003c\/li\u003e\n\u003cli\u003eSix nitrous ports accepting 1\/8 or 1\/16 NPT nozzles, with plugs supplied\u003c\/li\u003e\n\u003cli\u003ePlenum cutout for oil filter access without affecting flow\u003c\/li\u003e\n\u003cli\u003eRetains the factory engine cover via the included mount\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Charge air cooler manifold\u003c\/li\u003e\n\u003cli\u003e(1) Intake manifold gasket\u003c\/li\u003e\n\u003cli\u003e(1) Manifold \/ intercooler bracket set (EVAP line, MAP sensor wire, wire harness, coolant reservoir support and lower manifold support brackets)\u003c\/li\u003e\n\u003cli\u003e(1) Billet fuel rail\u003c\/li\u003e\n\u003cli\u003e(6) Fuel injector blanks\u003c\/li\u003e\n\u003cli\u003e(6) -6 ORB plugs\u003c\/li\u003e\n\u003cli\u003e(6) -6 ORB to 1\/8\" NPT adapters\u003c\/li\u003e\n\u003cli\u003e(6) -6 ORB to 1\/16\" NPT adapters\u003c\/li\u003e\n\u003cli\u003e(2) -8 ORB plugs\u003c\/li\u003e\n\u003cli\u003e(1) -10 ORB plug\u003c\/li\u003e\n\u003cli\u003e(2) 1\/8\" NPT plugs\u003c\/li\u003e\n\u003cli\u003e(2) EVAP hoses with worm gear clamps\u003c\/li\u003e\n\u003cli\u003e(1) Port injection fuel line kit with PTFE lines, EFI adapter fittings, T-fitting and ORB adapters\u003c\/li\u003e\n\u003cli\u003e(1) Engine cover mount\u003c\/li\u003e\n\u003cli\u003e(1) Hardware kit\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePort fuel injectors — \u003cstrong\u003enot supplied by Mishimoto\u003c\/strong\u003e. Required if the port injection provisions are to be used.\u003c\/li\u003e\n\u003cli\u003ePort injection controller and wiring — \u003cstrong\u003enot supplied by Mishimoto\u003c\/strong\u003e. One option stocked by Speed Logic: \u003ca href=\"\/products\/motiv-reflex-plus-advanced-i-o-integration\"\u003eMotiv ReFlex+ Advanced I\/O Integration\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA calibration\/tune from a supported S58 software provider is required to run the manifold and any port injection safely.\u003c\/li\u003e\n\u003cli\u003eNitrous nozzles (1\/8 or 1\/16 NPT) if the nitrous ports are used — not supplied.\u003c\/li\u003e\n\u003cli\u003eConsumable: fresh coolant for the charge air cooler circuit after installation.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied hand tools. Mishimoto rates installation as advanced and estimates 4–6 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/1730?v=1787176938\"\u003eMishimoto MMINT-G80-21 Performance Charge Air Cooler Manifold – Installation Guide (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMMINT-G80-21BK\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Competition\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Competition xDrive\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Competition\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Competition xDrive\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M\u003c\/td\u003e\n\u003ctd\u003eF97\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX3 M Competition\u003c\/td\u003e\n\u003ctd\u003eF97\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M\u003c\/td\u003e\n\u003ctd\u003eF98\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eX4 M Competition\u003c\/td\u003e\n\u003ctd\u003eF98\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":49060511449368,"sku":"MMINT-G80-21BK","price":3249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/1c0cb8238e7bc345a58c4d57e526dbf4.jpg?v=1725489429"}],"url":"https:\/\/speedlogicauto.com\/collections\/bmw-m2-g87-intercoolers.oembed","provider":"SPEED LOGIC","version":"1.0","type":"link"}