{"title":"BMW M4 F82 Intakes \u0026 Air Filters","description":null,"products":[{"product_id":"dinan-cold-air-intake-2015-2020-bmw-m2-m3-m4","title":"Dinan Cold Air Intake – BMW M2 Competition \/ M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's carbon fiber cold air intake for the F8x M2 Competition, M3 and M4 replaces the factory intake with a sealed, free-flowing system designed to deliver as much cold outside air to the S55 as possible. An optimized carbon fiber tube gives the charge a straighter, less restrictive path into the engine, while dual airboxes roughly 20% larger than stock house cylindrical filters 30% larger than stock and feed through a larger MAF housing — insulating the intake charge from underhood heat while increasing flow.\u003c\/p\u003e\n\u003cp\u003eThe result is a slightly more audible, sportier induction tone and, according to Dinan, increased horsepower and torque throughout the power band. Installation is bolt-on using the factory mounting locations, and the exposed carbon tube makes the intake as much of a visual upgrade under the hood as a performance one.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower gain: +14 HP @ 6000 RPM and +21 lb-ft @ 3000 RPM (coupled with engine tuning)\u003c\/li\u003e\n\u003cli\u003eAirbox volume approximately 20% larger than stock, fully sealed against underhood heat\u003c\/li\u003e\n\u003cli\u003eCylindrical air filters 30% larger than stock for optimum flow\u003c\/li\u003e\n\u003cli\u003eOptimized carbon fiber intake tube\u003c\/li\u003e\n\u003cli\u003eLarger MAF housing\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and a sportier induction sound\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eEmissions status per Dinan: legal under the provisions of the EPA Tampering Policy dated November 23, 2020; NOT legal for sale or use in the State of California\u003c\/li\u003e\n\u003cli\u003eDinan limited warranty: if the vehicle is still covered by the BMW new-car warranty, the part carries the remainder of that warranty up to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage. Wear items are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) MAF housing — D762-0204\u003c\/li\u003e\n\u003cli\u003e(1) Airbox lid, left — D762-0205\u003c\/li\u003e\n\u003cli\u003e(1) Airbox lid, right — D762-0206\u003c\/li\u003e\n\u003cli\u003e(1) Carbon fiber tube — D762-0207\u003c\/li\u003e\n\u003cli\u003e(1) Air filter — D401-0022\u003c\/li\u003e\n\u003cli\u003e(1) Silicone hose — D762-0208\u003c\/li\u003e\n\u003cli\u003e(1) Hardware kit — D763-0156 (9mm clamps, M4 button head screws, 7\/8\" loop clamp, vinyl cap, lid spacers, gaskets)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part.\u003c\/li\u003e\n\u003cli\u003eOptional: Dinan states this intake shows consistent gains over Stage 1 when combined with a Stage 2 DINANTRONICS Performance Tuner (sold separately, where applicable).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d760-0045.pdf?v=1788302499\"\u003eDinan D760-0045 Cold Air Intake — Installation Instructions (INS760-0045, Rev. 01\/08\/19) (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis part is legal for sale or use on Racing Use Only Vehicles. Racing Use Only Vehicles are vehicles that are used exclusively for competition, that are not registered, and that may never be used on the street.\u003c\/li\u003e\n\u003cli\u003eDinan's catalog lists this intake for the 2015–2021 M2 Competition, M3 and M4; years below are per model (the US F80 M3 was sold for model years 2015–2018).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD760-0045\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37679879192742,"sku":"D760-0045","price":1699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d760-0045_1.jpg?v=1611954275"},{"product_id":"injen-evolution-intake-evo1102-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Evolution Intake – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe EVO1102 is Injen's Evolution sealed cold air intake system for the S55-powered BMW M3 and M4. It was designed with current engineering tools and techniques and uses a pair of one-piece sealed roto-molded housings, each with the patent-pending Injen Twist-Lock system holding a SuperNano-Web dry air filter securely in place. A sight window in each housing makes filter inspection easy and gives the engine bay a distinctive look.\u003c\/p\u003e\n\u003cp\u003eThe two roto-molded intake tubes are custom designed and dyno-tuned for power while retaining a clean, quality fit. Stainless steel band clamps with an inner protective liner and reinforced automotive-grade silicone couplers provide a secure installation, and the Twist-Lock system reduces the hardware count so the kit goes on quickly. The system was created and designed entirely in 3D and fits to a standard equal to or above the OE system.\u003c\/p\u003e\n\u003cp\u003eAfter design work and dyno testing, Injen rates this Evolution intake at 22 additional horsepower and 27 lb-ft of torque, running on the stock calibration. It carries the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEvolution series dual sealed cold air intake\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 22 hp and 27 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock calibration; no tune required\u003c\/li\u003e\n\u003cli\u003eRetains the OEM mass air flow sensors\u003c\/li\u003e\n\u003cli\u003eDurable roto-molded polyethylene tubes and one-piece sealed housings\u003c\/li\u003e\n\u003cli\u003ePatent-pending Twist-Lock filter attachment system\u003c\/li\u003e\n\u003cli\u003eTwo fully serviceable Injen SuperNano-Web dry air filters\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1097-BB\u003c\/li\u003e\n\u003cli\u003eReinforced automotive-grade silicone couplers\u003c\/li\u003e\n\u003cli\u003eStainless steel band clamps with inner protective liner\u003c\/li\u003e\n\u003cli\u003eClearVue inspection badge for checking filter condition\u003c\/li\u003e\n\u003cli\u003eAggressive intake growl under acceleration\u003c\/li\u003e\n\u003cli\u003eShipping weight 30.0 lb; package 17\" W x 13\" H x 28\" L\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x right side airbox (X-15113)\u003c\/li\u003e\n\u003cli\u003e1 x right side intake tube (X-15114)\u003c\/li\u003e\n\u003cli\u003e1 x left side airbox (X-15115)\u003c\/li\u003e\n\u003cli\u003e1 x left side intake tube (X-15116)\u003c\/li\u003e\n\u003cli\u003e2 x Twist-Lock dry air filters, no fitting (X-1097)\u003c\/li\u003e\n\u003cli\u003e1 x 3.00\" x 1.0\" straight hose (X-3187)\u003c\/li\u003e\n\u003cli\u003e2 x #48 clamps (X-4004)\u003c\/li\u003e\n\u003cli\u003e1 x machined fitting (X-14066)\u003c\/li\u003e\n\u003cli\u003e2 x small windows (X-15139)\u003c\/li\u003e\n\u003cli\u003e4 x push nuts (X-6109)\u003c\/li\u003e\n\u003cli\u003e4 x M4 Allen screws (X-6072)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e All mounting hardware is included and no tune is required.\u003c\/li\u003e\n\u003cli\u003eOptional service part: \u003ca href=\"\/products\/injen-x-1097-replacement-air-filter-evo1102-intake-bmw-s55-m2-comp-m3-m4\"\u003eInjen replacement Twist-Lock dry air filter X-1097-BB\u003c\/a\u003e (two required for a full set).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-evo1102-installation-instructions.pdf?v=1787176906\" target=\"_blank\"\u003eInjen EVO1102 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Injen also restricts shipment of this part to CA, CO, CT, DE, ME, MD, MA, MN, NY, NJ, OR, PA, RI, VT and WA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVO1102\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180223434918,"sku":"EVO1102","price":875.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198651942.jpg?v=1792456035"},{"product_id":"injen-short-ram-intake-polished-sp1116p-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Short Ram Intake SP1116P – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe SP series is Injen Technology's flagship traditional aluminum intake line. Injen produced the world's first tuned air intake system and holds four patents covering the intake tuning process, including MegaRam (MR) Technology (patents 7,359,795 and 7,669,571) and Air Fusion (patent 7,721,669). The SP1116 is a two-piece short ram system built with MR Technology for the S55 twin-turbo six.\u003c\/p\u003e\n\u003cp\u003eEach 6061-T6 aluminum intake tube feeds one turbo through a smooth, uninterrupted path in place of the restrictive factory airbox. Because the S55 runs a pair of turbochargers, the kit ships with two application-specific heat shields — driver and passenger side — to isolate both filters from radiant underhood heat. Injen developed the system on the dyno for gains of up to 20 horsepower and 23 lb-ft of torque, the largest figures in the SP BMW range, while holding a safe air\/fuel ratio across the power band, so no additional tuning is required.\u003c\/p\u003e\n\u003cp\u003eAir is drawn through a pair of fully serviceable Injen SuperNano-Web dry filters, which add filtration surface area for greater airflow without an oiled media. The polished aluminum tubes are a clean showpiece under the hood, and the system delivers an aggressive, throaty tone under full throttle. Made in Pomona, California and backed by the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Injen SP short ram air intake system, two-piece\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 20 hp and 23 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eIntake tubes: 6061-T6 aluminum, polished finish\u003c\/li\u003e\n\u003cli\u003eAlso offered by Injen in wrinkle black and wrinkle red finishes\u003c\/li\u003e\n\u003cli\u003eBuilt with Injen MR Technology\u003c\/li\u003e\n\u003cli\u003eFilters: two Injen SuperNano-Web dry air filters, 3\" inlet, fully serviceable\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1081-BB\u003c\/li\u003e\n\u003cli\u003eIncludes dual application-specific heat shields (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMaintains factory air\/fuel ratios; no additional tuning required\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt — not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Two-piece short ram intake system with MR Technology\u003c\/li\u003e\n\u003cli\u003e1 x Driver-side heat shield (#11125)\u003c\/li\u003e\n\u003cli\u003e1 x Passenger-side heat shield (#11124)\u003c\/li\u003e\n\u003cli\u003e2 x Injen badge (#11097)\u003c\/li\u003e\n\u003cli\u003e2 x 3\" Injen dry filter (#1081)\u003c\/li\u003e\n\u003cli\u003e1 x 3\" straight hose (#3187)\u003c\/li\u003e\n\u003cli\u003e2 x #048 Power Band clamps (#4004)\u003c\/li\u003e\n\u003cli\u003e2 x M6 stand-off studs (#15023)\u003c\/li\u003e\n\u003cli\u003e2 x M6 Vibra-mount (#6020)\u003c\/li\u003e\n\u003cli\u003e1 x Nylon spacer (#8042)\u003c\/li\u003e\n\u003cli\u003e1 x Grommet (#8026)\u003c\/li\u003e\n\u003cli\u003e4 x M4 button screws (#6072)\u003c\/li\u003e\n\u003cli\u003e7 x M6 flange nuts (#6002)\u003c\/li\u003e\n\u003cli\u003e8 x Fender washers (#6010)\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 16 hex screws (#6005)\u003c\/li\u003e\n\u003cli\u003e1 x M6 x 25 hex screw (#6006)\u003c\/li\u003e\n\u003cli\u003e2 x Rubber trim, 13.5\" length (#6058)\u003c\/li\u003e\n\u003cli\u003e2 x Vinyl trim, 13.5\" length (#6023)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 18\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 15.5\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x 4-page instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e All mounting hardware is included and no tune is required.\u003c\/li\u003e\n\u003cli\u003eOptional service part: \u003ca href=\"\/products\/injen-x-1081-replacement-air-filter-sp1116-intake-bmw-s55-m2-comp-m3-m4\"\u003eInjen replacement dry air filter X-1081-BB\u003c\/a\u003e (two required for a full set).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\" target=\"_blank\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSP1116P\u003c\/strong\u003e — polished finish (this listing)\u003c\/li\u003e\n\u003cli\u003eWrinkle black finish — \u003ca href=\"\/products\/injen-short-ram-intake-wrinkle-black-sp1116wb-2015-2020-bmw-m3-m4-f80-f82\"\u003eSP1116WB\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWrinkle red finish — SP1116WR\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180383506598,"sku":"SP1116P","price":933.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198653374.jpg?v=1792456061"},{"product_id":"injen-short-ram-intake-wrinkle-black-sp1116wb-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Short Ram Intake Wrinkle Black SP1116WB – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe SP series is Injen Technology's flagship traditional aluminum intake line. Injen produced the world's first tuned air intake system and holds four patents covering the intake tuning process, including MegaRam (MR) Technology (patents 7,359,795 and 7,669,571) and Air Fusion (patent 7,721,669). The SP1116 is a two-piece short ram system built with MR Technology for the S55 twin-turbo six.\u003c\/p\u003e\n\u003cp\u003eEach 6061-T6 aluminum intake tube feeds one turbo through a smooth, uninterrupted path in place of the restrictive factory airbox. Because the S55 runs a pair of turbochargers, the kit ships with two application-specific heat shields — driver and passenger side — to isolate both filters from radiant underhood heat. Injen developed the system on the dyno for gains of up to 20 horsepower and 23 lb-ft of torque, the largest figures in the SP BMW range, while holding a safe air\/fuel ratio across the power band, so no additional tuning is required.\u003c\/p\u003e\n\u003cp\u003eAir is drawn through a pair of fully serviceable Injen SuperNano-Web dry filters, which add filtration surface area for greater airflow without an oiled media. The textured wrinkle black finish gives a stealth look under the hood, and the system delivers an aggressive, throaty tone under full throttle. Made in Pomona, California and backed by the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Injen SP short ram air intake system, two-piece\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 20 hp and 23 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eIntake tubes: 6061-T6 aluminum, wrinkle black finish\u003c\/li\u003e\n\u003cli\u003eAlso offered by Injen in polished and wrinkle red finishes\u003c\/li\u003e\n\u003cli\u003eBuilt with Injen MR Technology\u003c\/li\u003e\n\u003cli\u003eFilters: two Injen SuperNano-Web dry air filters, 3\" inlet, fully serviceable\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1081-BB\u003c\/li\u003e\n\u003cli\u003eIncludes dual application-specific heat shields (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMaintains factory air\/fuel ratios; no additional tuning required\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt — not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Two-piece short ram intake system with MR Technology\u003c\/li\u003e\n\u003cli\u003e1 x Driver-side heat shield (#11125)\u003c\/li\u003e\n\u003cli\u003e1 x Passenger-side heat shield (#11124)\u003c\/li\u003e\n\u003cli\u003e2 x Injen badge (#11097)\u003c\/li\u003e\n\u003cli\u003e2 x 3\" Injen dry filter (#1081)\u003c\/li\u003e\n\u003cli\u003e1 x 3\" straight hose (#3187)\u003c\/li\u003e\n\u003cli\u003e2 x #048 Power Band clamps (#4004)\u003c\/li\u003e\n\u003cli\u003e2 x M6 stand-off studs (#15023)\u003c\/li\u003e\n\u003cli\u003e2 x M6 Vibra-mount (#6020)\u003c\/li\u003e\n\u003cli\u003e1 x Nylon spacer (#8042)\u003c\/li\u003e\n\u003cli\u003e1 x Grommet (#8026)\u003c\/li\u003e\n\u003cli\u003e4 x M4 button screws (#6072)\u003c\/li\u003e\n\u003cli\u003e7 x M6 flange nuts (#6002)\u003c\/li\u003e\n\u003cli\u003e8 x Fender washers (#6010)\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 16 hex screws (#6005)\u003c\/li\u003e\n\u003cli\u003e1 x M6 x 25 hex screw (#6006)\u003c\/li\u003e\n\u003cli\u003e2 x Rubber trim, 13.5\" length (#6058)\u003c\/li\u003e\n\u003cli\u003e2 x Vinyl trim, 13.5\" length (#6023)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 18\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 15.5\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x 4-page instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e All mounting hardware is included and no tune is required.\u003c\/li\u003e\n\u003cli\u003eOptional service part: \u003ca href=\"\/products\/injen-x-1081-replacement-air-filter-sp1116-intake-bmw-s55-m2-comp-m3-m4\"\u003eInjen replacement dry air filter X-1081-BB\u003c\/a\u003e (two required for a full set).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\" target=\"_blank\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSP1116WB\u003c\/strong\u003e — wrinkle black finish (this listing)\u003c\/li\u003e\n\u003cli\u003ePolished finish — \u003ca href=\"\/products\/injen-short-ram-intake-polished-sp1116p-2015-2020-bmw-m3-m4-f80-f82\"\u003eSP1116P\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWrinkle red finish — SP1116WR\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180467589286,"sku":"SP1116WB","price":933.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198653376.jpg?v=1792456061"},{"product_id":"eventuri-carbon-intake-v2-for-2015-2019-bmw-f8x-m3-m4-eve-f8xmv2-cf-int","title":"Eventuri Carbon Intake V2 – BMW M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe F8X M3 \/ M4 intake system is one of Eventuri's most ambitious designs. In its updated V2 form it features sealed filter housings that maintain a more steady IAT even while the car is stationary. New ducts seal the housings and, combined with the carbon front scoops, ensure unrestricted airflow while keeping inlet temperatures down through cold air saturation.\u003c\/p\u003e\n\u003cp\u003eEvery detail was considered to create a flagship intake for the platform. From the scoops to the ducts to the intake tubes, Eventuri developed a complete solution that gives a smooth inlet track with cold air saturation. The carbon weave is matched to OEM M Performance carbon, so the system looks factory-correct alongside the rest of the engine bay.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower gain: 15–20 hp (Eventuri)\u003c\/li\u003e\n\u003cli\u003eTorque gain: 18–23 lb-ft (Eventuri)\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri carbon fiber Venturi housings, sealed in the V2 design for steadier IATs\u003c\/li\u003e\n\u003cli\u003e100% prepreg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eCarbon weave matched to OEM M Performance carbon\u003c\/li\u003e\n\u003cli\u003eTwo high flow Gen 2 filters\u003c\/li\u003e\n\u003cli\u003eLeft and right carbon tubes with integrated MAF sensor mounts — the OEM mass airflow sensors are retained\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber sealed intake ducts\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber front scoops for cold air saturation\u003c\/li\u003e\n\u003cli\u003eTwo aluminum cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel brackets\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Carbon fiber Venturi housings\u003c\/li\u003e\n\u003cli\u003e2 x High flow Gen 2 filters\u003c\/li\u003e\n\u003cli\u003eRight side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eLeft side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber sealed intake ducts\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber front scoops\u003c\/li\u003e\n\u003cli\u003e2 x Aluminum cowls\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel brackets\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Eventuri specifies no additional hardware for this part.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/eventuri-EVE-F8XMV2-CF-INT-installation-instructions.pdf?v=1787176318\"\u003eEventuri BMW F8X M3 \/ M4 Intake System – Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e ** This item is not eligible for return ** Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. \u003ca href=\"\/pages\/contact-us\"\u003ePlease contact us\u003c\/a\u003e if you are unsure if a product is available for sale in California.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVE-F8XMV2-CF-INT\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":43023458926758,"sku":"EVE-F8XMV2-CF-INT","price":2695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/1_6a9d2515-f2fd-464a-8b2a-2958afa61565.webp?v=1656634211"},{"product_id":"afe-cold-air-intake-bmw-m3-m4-f80-f82-s55","title":"aFe Cold Air Intake – BMW M3 \/ M4 (F80 \/ F82, S55)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eaFe offers four cold-air intakes for the F80 M3 and F82 \/ F83 M4 (S55). Choose the configuration at the variant level: the enclosed Momentum with a Pro 5R filter, the full carbon-fiber Black Series Momentum, the open-element Magnum FORCE Stage-2, and the carbon-fiber Track Series. All are configured with aFe Pro 5R oiled cotton-gauze media and are washable and reusable.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour configurations (selected at the variant level): Momentum (enclosed housing), Black Series Momentum (full carbon-fiber housing), Magnum FORCE Stage-2 (open-element), Track Series (carbon-fiber tube and box)\u003c\/li\u003e\n\u003cli\u003ePro 5R oiled cotton-gauze filter media, washable and reusable\u003c\/li\u003e\n\u003cli\u003eHousing material and price vary by configuration\u003c\/li\u003e\n\u003cli\u003eDirect fit for the S55 F80 \/ F82 \/ F83\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntake tube \/ housing\u003c\/li\u003e\n\u003cli\u003ePro 5R filter(s)\u003c\/li\u003e\n\u003cli\u003eCouplers, clamps and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e aFe specifies no additional hardware for this intake.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/afe-54-76305-installation-instructions.pdf?v=1791929935\"\u003eaFe 54-76305 Momentum installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/afe-54-76305-CF-installation-instructions.pdf?v=1791929935\"\u003eaFe 54-76305-CF Black Series Momentum Carbon Fiber installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/afe-54-13032R-installation-instructions.pdf?v=1791929935\"\u003eaFe 54-13032R Magnum FORCE Stage-2 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/afe-57-10006R-installation-instructions.pdf?v=1791929935\"\u003eaFe 57-10006R Track Series Carbon Fiber installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfiguration is selected at the variant level; housing material and price vary by configuration.\u003c\/li\u003e\n\u003cli\u003eThe Magnum FORCE Stage-2 accepts optional Dynamic Air Scoops (aFe 54-13032S series) sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e54-76305\u003c\/strong\u003e — Momentum Pro 5R (enclosed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54-76305-CF\u003c\/strong\u003e — Black Series Momentum Carbon Fiber Pro 5R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54-13032R\u003c\/strong\u003e — Magnum FORCE Stage-2 Pro 5R (open-element)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e57-10006R\u003c\/strong\u003e — Track Series Carbon Fiber Pro 5R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"aFe","offers":[{"title":"Momentum Pro 5R","offer_id":52563437060376,"sku":"54-76305","price":704.0,"currency_code":"USD","in_stock":true},{"title":"Black Series Carbon Fiber Pro 5R","offer_id":52563438305560,"sku":"54-76305-CF","price":1532.0,"currency_code":"USD","in_stock":true},{"title":"Magnum FORCE Stage-2 Pro 5R","offer_id":52563438338328,"sku":"54-13032R","price":593.0,"currency_code":"USD","in_stock":true},{"title":"Track Series Carbon Fiber Pro 5R","offer_id":52563438371096,"sku":"57-10006R","price":1268.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/54-76305_1.jpg?v=1787604642"},{"product_id":"afe-magnum-flow-oe-air-filter-bmw-m3-m4-f80-f82-s55-30-10238","title":"aFe Magnum FLOW OE Replacement Air Filter (Pro 5R) – BMW M3 \/ M4 (F80 \/ F82, S55)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThis aFe Magnum FLOW OE-replacement air filter drops into the factory airbox of the F80 M3 and F82 \/ F83 M4 (S55) with washable, reusable Pro 5R oiled cotton-gauze media for improved airflow over the stock paper element.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePro 5R oiled cotton-gauze media\u003c\/li\u003e\n\u003cli\u003eDirect OE drop-in for the factory airbox\u003c\/li\u003e\n\u003cli\u003eWashable and reusable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003eOne OE-replacement air filter\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Direct drop-in replacement.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation recommended.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/community\/contact?service=Parts+Install\"\u003eRequest an Install Appointment\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eAn oil-free Pro DRY S version may be available under a separate part number.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e30-10238\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82 \/ F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":52563514097944,"sku":"30-10238","price":204.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/30-10238a1600.jpg?v=1787609505"},{"product_id":"awe-tuning-s-flo-carbon-intake-bmw-m3-m4-f80-f82-s55","title":"AWE Tuning S-FLO Carbon Fiber Intake – BMW M3 \/ M4 (F80 \/ F82, S55)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe AWE S-FLO Carbon Intake for the F80 M3 and F82 \/ F83 M4 (S55) replaces the factory airboxes with two fully enclosed carbon fiber airboxes that mount in the stock locations and match up to the factory air inlet pipes. Together with the two AWE S-FLO filters, it unlocks peak gains of 12 hp and 10 lb-ft at the crank.\u003c\/p\u003e\n\u003cp\u003eThe filters produce a more aggressive intake note with a distinctive turbo spool sound, and can be inspected and serviced without removing the carbon crossmember. AWE S-FLO intakes are for racing use only.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo fully sealed carbon fiber airboxes, 2x2 weave carbon with UV-stabilized resin and clear coat\u003c\/li\u003e\n\u003cli\u003eTwo AWE S-FLO filters, durable and washable; 109% more filter area\u003c\/li\u003e\n\u003cli\u003ePeak gains of 12 hp and 10 lb-ft at the crank\u003c\/li\u003e\n\u003cli\u003ePlug-and-play MAF and breather locations; uses the OE mounting points\u003c\/li\u003e\n\u003cli\u003eFilter service without removing the carbon crossmember\u003c\/li\u003e\n\u003cli\u003eNot CARB approved; racing use only\u003c\/li\u003e\n\u003cli\u003eAWE No CEL and Perfect Fitment guarantees\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo carbon airboxes and two carbon lids\u003c\/li\u003e\n\u003cli\u003eCarbon tube\u003c\/li\u003e\n\u003cli\u003eTwo S-FLO filters\u003c\/li\u003e\n\u003cli\u003eM4 and M5 mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e AWE specifies no additional parts and no tune for this intake.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/awe-2660-13038-f8x-s-flo-intake-installation-instructions.pdf?v=1791933764\" target=\"_blank\" rel=\"noopener\"\u003eAWE Carbon Fiber S-FLO Intake for 2015+ F8X M3 \/ M4 installation guide (Rev 1.0, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eAWE lists F8X M3 \/ M4; the F83 convertible is listed by ECS Tuning.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e2660-13038\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":52563528974616,"sku":"2660-13038","price":1485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/2660-13038_1.jpg?v=1787611099"},{"product_id":"ams-performance-bmw-f8x-m3-m4-s55-carbon-fiber-intakes","title":"AMS Performance BMW F8X M3\/M4 S55 Carbon Fiber Intakes","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-wrap{overflow-x:auto}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe AMS Performance carbon intakes replace the F8X M3\/M4's plastic airboxes and intake tubes with sealed, hand-laid carbon fiber airboxes, tubes and front ducts, plus reusable dry media filters. The enclosed boxes keep out hot engine-bay air, and the carbon ducts run all the way to the front grille with full scoops, feeding the turbos cold, high-pressure air.\u003c\/p\u003e\n\u003cp\u003eAMS flow testing showed a 27% reduction in intake restriction at 4,500 RPM versus the factory system. Neodymium magnetic lids give tool-free filter access, and the 3K twill carbon is rated to 240°C, so it won't yellow or fade.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e27% reduction in airflow restriction at 4,500 RPM versus OEM\u003c\/li\u003e\n\u003cli\u003eEnclosed carbon fiber airboxes with neodymium magnetic lids\u003c\/li\u003e\n\u003cli\u003eCarbon front ducts with full scoops behind the grille\u003c\/li\u003e\n\u003cli\u003e3K twill hand-laid carbon fiber, rated to 240°C; no yellowing or fading\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet 6061-T6 mounting hardware with OEM-style fitment features\u003c\/li\u003e\n\u003cli\u003eReusable synthetic dry media filters (no oiling)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play, no permanent modification\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber airboxes with magnetic lids (pair)\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake tubes and front intake ducts\u003c\/li\u003e\n\u003cli\u003eDry media filters (pair)\u003c\/li\u003e\n\u003cli\u003eBillet aluminum mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECU calibration with MAF scaling.\u003c\/strong\u003e AMS provides MAF scaling data for calibrating the ECU with these intakes: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/AMS-S55-Carbon-Intakes-Mass-Airflow-Sensor-Scaling.xlsx?v=1791930353\" target=\"_blank\" rel=\"noopener\"\u003eAMS S55 Carbon Intakes MAF Calibration Data (XLSX)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/AMS-Performance-BMW-S55-Intake-Install-Instructions-v2.pdf?v=1788463785\" target=\"_blank\" rel=\"noopener\"\u003eAMS Performance BMW S55 Carbon Intakes Install Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter care:\u003c\/strong\u003e Clean with compressed air (30–40 psi) from the inside out. For a deep clean, use a mild biodegradable degreaser, rinse, and let dry fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon fiber:\u003c\/strong\u003e Parts are hand-laid; slight imperfections or weave variation are normal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmissions:\u003c\/strong\u003e AMS Performance has not completed CARB\/EPA compliance testing for this part. Not legal for emissions-controlled vehicles in California without a completed AMS race waiver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAMS.39.08.0001-1\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003cdiv class=\"va-wrap\"\u003e\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\/F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":52610084307224,"sku":"AMS.39.08.0001-1","price":1499.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/AMS-Performance-F8X-S55-Carbon-Fiber-Intakes-1.jpg?v=1788464091"},{"product_id":"bmc-twin-air-filter-kit-bmw-s55-m3-m4-m2-competition","title":"BMC Twin Air Filter Kit - BMW S55 M3\/M4\/M2 Competition","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe BMC Twin Air Filter Kit is a direct-fit replacement for both factory paper filters on S55-powered BMW F80 M3, F82\/F83 M4 and F87 M2 Competition\/CS models. Made from oiled cotton gauze, it is washable and regenerable for the life of the vehicle and flows more air than the stock paper elements.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOiled cotton gauze media, filtration down to 7 microns\u003c\/li\u003e\n\u003cli\u003eWashable and reusable\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement in the factory airbox — no tuning required\u003c\/li\u003e\n\u003cli\u003eOEM cross-reference: BMW 13727843283 \/ 13728743284\u003c\/li\u003e\n\u003cli\u003eFilter dimensions: 214 x 235mm per filter\u003c\/li\u003e\n\u003cli\u003eKit weight: 0.9kg (two filters)\u003c\/li\u003e\n\u003cli\u003e2-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(2) BMC Performance Air Filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e BMC specifies no additional hardware; it installs in the factory airbox in place of the factory filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect drop-in replacement for the factory paper filters. BMC does not publish a kit-specific installation PDF for this filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.bmcairfilters.com\/en\/how-to-regenerate-a-bmc-air-filter\" target=\"_blank\" rel=\"noopener\"\u003eBMC — How to Regenerate a BMC Air Filter\u003c\/a\u003e — filter cleaning and re-oiling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFB647\/20\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 CS\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible (incl. Competition)\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 GTS\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 CS\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 CS\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"BMC","offers":[{"title":"Default Title","offer_id":52610137162008,"sku":"FB647\/20","price":207.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/5343798d9c26dc83ba2751677e602b9a.jpg?v=1788465610"},{"product_id":"injen-short-ram-intake-wrinkle-red-sp1116wr-bmw-s55-m2-competition-m3-m4-f8x","title":"Injen Short Ram Intake Wrinkle Red SP1116WR – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe SP series is Injen Technology's flagship traditional aluminum intake line. Injen produced the world's first tuned air intake system and holds four patents covering the intake tuning process, including MegaRam (MR) Technology (patents 7,359,795 and 7,669,571) and Air Fusion (patent 7,721,669). The SP1116 is a two-piece short ram system built with MR Technology for the S55 twin-turbo six.\u003c\/p\u003e\n\u003cp\u003eEach 6061-T6 aluminum intake tube feeds one turbo through a smooth, uninterrupted path in place of the restrictive factory airbox. Because the S55 runs a pair of turbochargers, the kit ships with two application-specific heat shields — driver and passenger side — to isolate both filters from radiant underhood heat. Injen developed the system on the dyno for gains of up to 20 horsepower and 23 lb-ft of torque, the largest figures in the SP BMW range, while holding a safe air\/fuel ratio across the power band, so no additional tuning is required.\u003c\/p\u003e\n\u003cp\u003eAir is drawn through a pair of fully serviceable Injen SuperNano-Web dry filters, which add filtration surface area for greater airflow without an oiled media. The textured wrinkle red finish stands out under the hood, and the system delivers an aggressive, throaty tone under full throttle. Made in Pomona, California and backed by the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Injen SP short ram air intake system, two-piece\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 20 hp and 23 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eIntake tubes: 6061-T6 aluminum, wrinkle red finish\u003c\/li\u003e\n\u003cli\u003eAlso offered by Injen in polished and wrinkle black finishes\u003c\/li\u003e\n\u003cli\u003eBuilt with Injen MR Technology\u003c\/li\u003e\n\u003cli\u003eFilters: two Injen SuperNano-Web dry air filters, 3\" inlet, fully serviceable\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1081-BB\u003c\/li\u003e\n\u003cli\u003eIncludes dual application-specific heat shields (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMaintains factory air\/fuel ratios; no additional tuning required\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt — not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Two-piece short ram intake system with MR Technology\u003c\/li\u003e\n\u003cli\u003e1 x Driver-side heat shield (#11125)\u003c\/li\u003e\n\u003cli\u003e1 x Passenger-side heat shield (#11124)\u003c\/li\u003e\n\u003cli\u003e2 x Injen badge (#11097)\u003c\/li\u003e\n\u003cli\u003e2 x 3\" Injen dry filter (#1081)\u003c\/li\u003e\n\u003cli\u003e1 x 3\" straight hose (#3187)\u003c\/li\u003e\n\u003cli\u003e2 x #048 Power Band clamps (#4004)\u003c\/li\u003e\n\u003cli\u003e2 x M6 stand-off studs (#15023)\u003c\/li\u003e\n\u003cli\u003e2 x M6 Vibra-mount (#6020)\u003c\/li\u003e\n\u003cli\u003e1 x Nylon spacer (#8042)\u003c\/li\u003e\n\u003cli\u003e1 x Grommet (#8026)\u003c\/li\u003e\n\u003cli\u003e4 x M4 button screws (#6072)\u003c\/li\u003e\n\u003cli\u003e7 x M6 flange nuts (#6002)\u003c\/li\u003e\n\u003cli\u003e8 x Fender washers (#6010)\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 16 hex screws (#6005)\u003c\/li\u003e\n\u003cli\u003e1 x M6 x 25 hex screw (#6006)\u003c\/li\u003e\n\u003cli\u003e2 x Rubber trim, 13.5\" length (#6058)\u003c\/li\u003e\n\u003cli\u003e2 x Vinyl trim, 13.5\" length (#6023)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 18\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 15.5\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x 4-page instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e All mounting hardware is included and no tune is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\" target=\"_blank\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOptional service part: \u003ca href=\"\/products\/injen-x-1081-replacement-air-filter-sp1116-intake-bmw-s55-m2-comp-m3-m4\"\u003eInjen replacement dry air filter X-1081-BB\u003c\/a\u003e (two required for a full set).\u003c\/li\u003e\n\u003cli\u003eThis product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSP1116WR\u003c\/strong\u003e — wrinkle red finish (this listing)\u003c\/li\u003e\n\u003cli\u003ePolished finish — \u003ca href=\"\/products\/injen-short-ram-intake-polished-sp1116p-2015-2020-bmw-m3-m4-f80-f82\"\u003eSP1116P\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWrinkle black finish — \u003ca href=\"\/products\/injen-short-ram-intake-wrinkle-black-sp1116wb-2015-2020-bmw-m3-m4-f80-f82\"\u003eSP1116WB\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":52948055621912,"sku":"SP1116WR","price":933.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198656678.jpg?v=1792456062"},{"product_id":"injen-x-1081-replacement-air-filter-sp1116-intake-bmw-s55-m2-comp-m3-m4","title":"Injen X-1081 Replacement Air Filter – SP1116 Intake (BMW S55 M2 Comp \/ M3 \/ M4)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Injen X-1081 is the replacement air filter for the Injen SP1116 intake. Fit it at service time to restore the airflow and filtration of the original element — this intake uses two filters, one per side.\u003c\/p\u003e\n\u003cp\u003eThe X-1081-BB uses Injen's \u003cstrong\u003eSuperNano-Web\u003c\/strong\u003e dry synthetic media — no oil and no risk of oil migrating onto a hot-film MAF sensor. Wash it in warm water, let it dry and refit it.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlange inside diameter: 3.00\"\u003c\/li\u003e\n\u003cli\u003eFlange height: 0.70\"\u003c\/li\u003e\n\u003cli\u003eBase outside diameter: 5.00\"\u003c\/li\u003e\n\u003cli\u003eMedia height: 4.50\"\u003c\/li\u003e\n\u003cli\u003eTop outside diameter: 4.00\"\u003c\/li\u003e\n\u003cli\u003eOverall height: 5.60\"\u003c\/li\u003e\n\u003cli\u003eX-1081-BB media: SuperNano-Web dry synthetic, washable, no oiling\u003c\/li\u003e\n\u003cli\u003eFits Injen intake: SP1116\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Injen X-1081 replacement air filter (SuperNano-Web dry)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe SP1116 uses two filters. Order a quantity of 2 for a full set.\u003c\/li\u003e\n\u003cli\u003eNo other parts. The dry X-1081-BB needs only warm water at service; do not oil it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eFits the \u003ca href=\"\/products\/injen-short-ram-intake-polished-sp1116p-2015-2020-bmw-m3-m4-f80-f82\"\u003eInjen Short Ram Intake SP1116P – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits the \u003ca href=\"\/products\/injen-short-ram-intake-wrinkle-black-sp1116wb-2015-2020-bmw-m3-m4-f80-f82\"\u003eInjen Short Ram Intake Wrinkle Black SP1116WB – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove the old element, fit the new one to the same flange and check the clamp is seated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eX-1081-BB\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":52965053595928,"sku":"X-1081-BB","price":84.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198652351.jpg?v=1787686772"},{"product_id":"injen-x-1097-replacement-air-filter-evo1102-intake-bmw-s55-m2-comp-m3-m4","title":"Injen X-1097 Replacement Air Filter – EVO1102 Intake (BMW S55 M2 Comp \/ M3 \/ M4)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Injen X-1097 is the replacement air filter for the Injen EVO1102 intake. Fit it at service time to restore the airflow and filtration of the original element — this intake uses two filters, one per side.\u003c\/p\u003e\n\u003cp\u003eThe X-1097-BB uses Injen's \u003cstrong\u003eSuperNano-Web\u003c\/strong\u003e dry synthetic media — no oil and no risk of oil migrating onto a hot-film MAF sensor. Wash it in warm water, let it dry and refit it.\u003c\/p\u003e\n\u003cp\u003eThe X-1097 uses Injen's Twist-Lock base, which locks into the Evolution housing with a quarter turn instead of a hose clamp.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlange inside diameter: 3.50\"\u003c\/li\u003e\n\u003cli\u003eBase: 5.50\" Twist-Lock\u003c\/li\u003e\n\u003cli\u003eX-1097-BB media: SuperNano-Web dry synthetic, washable, no oiling\u003c\/li\u003e\n\u003cli\u003eFits Injen intake: EVO1102\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Injen X-1097 replacement air filter (SuperNano-Web dry)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe EVO1102 uses two filters. Order a quantity of 2 for a full set.\u003c\/li\u003e\n\u003cli\u003eNo other parts. The dry X-1097-BB needs only warm water at service; do not oil it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-evo1102-installation-instructions.pdf?v=1787176906\"\u003eInjen EVO1102 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eFits the \u003ca href=\"\/products\/injen-evolution-intake-evo1102-2015-2020-bmw-m3-m4-f80-f82\"\u003eInjen Evolution Intake – BMW S55 M2 Competition \/ M3 \/ M4 (F8x)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemove the old element, fit the new one to the same Twist-Lock base and turn it to lock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eX-1097-BB\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":52965063754008,"sku":"X-1097-BB","price":94.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/F198652370.jpg?v=1787686772"}],"url":"https:\/\/speedlogicauto.com\/collections\/bmw-m4-f82-intakes-air-filters.oembed","provider":"SPEED LOGIC","version":"1.0","type":"link"}