{"title":"BMW M8 F93 Intakes \u0026 Air Filters","description":null,"products":[{"product_id":"dinan-carbon-fiber-turbo-inlet-pipes-f90-m5-f91-92-93-m8","title":"Dinan Carbon Fiber Turbo Inlet Pipes – BMW M5 (F90) \/ M8 (F91\/F92\/F93)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan Turbo Inlets are an easy-to-install bolt-on upgrade that removes the single largest obstacle in the factory intake system: the plastic turbocharger inlets, which neck down dramatically and raise pre-turbine pressure, forcing the turbos to work harder than they need to. Dinan’s replacements are built from gloss UV-coated 2×2 carbon fiber with aluminum adapters at the turbocharger, retaining the factory locking system for a bolt-on fit, and deliver roughly 200% more cross-sectional volume than stock — 105 cubic inches per side versus 35.\u003c\/p\u003e\n\u003cp\u003eOn a car with the factory airboxes that is worth average gains of 11 WHP and 13 WTQ from 2000 RPM to redline (up to 22 WHP and 18 lb-ft peak), with the turbocharger running at a lower, more efficient pressure ratio that also lowers shaft speeds and compressor discharge temperatures — benefits that increase further when paired with the Dinan Cold Air Intake.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMore power: maximum gains of 22 WHP and 18 lb-ft of torque @ 6500 RPM on an otherwise stock vehicle\u003c\/li\u003e\n\u003cli\u003eAverage gains of 11 WHP and 13 WTQ from 2000 RPM to redline\u003c\/li\u003e\n\u003cli\u003eApproximately 200% more volume than stock — 105 cubic inches versus 35 cubic inches per side\u003c\/li\u003e\n\u003cli\u003eLarger internal diameter throughout, at the maximum cross-sectional area the chassis allows\u003c\/li\u003e\n\u003cli\u003eGloss UV-coated 2×2 carbon fiber construction with aluminum turbocharger adapters\u003c\/li\u003e\n\u003cli\u003eRetains the factory locking system at the turbocharger for a bolt-on fit\u003c\/li\u003e\n\u003cli\u003eCompatible with the stock airboxes or the full Dinan Cold Air Intake system\u003c\/li\u003e\n\u003cli\u003eDinan published installation labor: 1.0 hour\u003c\/li\u003e\n\u003cli\u003eEmissions: Dinan states “This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB.”\u003c\/li\u003e\n\u003cli\u003eOutside California, Dinan states the part is legal under the EPA Tampering Policy dated November 23, 2020\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car limited warranty (4 years\/50,000 miles), Dinan products are warranted for the remaining term of that warranty; otherwise Dinan Performance Products carry a 2-year, unlimited-mileage warranty from the date of original purchase. Wear and maintenance items — friction materials, filters, fluids, spark plugs, drive belts and bulbs — are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLeft and right carbon fiber turbo inlet pipes with their aluminum turbocharger adapters, as supplied by Dinan.\u003c\/li\u003e\n\u003cli\u003eComplete kit as supplied by Dinan; see the installation instructions for the full bill of materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — the inlets bolt to the factory airboxes and lock into the stock turbocharger fittings.\u003c\/li\u003e\n\u003cli\u003eOptional pairing: the \u003ca href=\"\/products\/dinan-cold-air-intake-2018-2022-bmw-m5\"\u003eDinan Cold Air Intake (D760-0049)\u003c\/a\u003e. Dinan states the efficiency of the whole intake system is maximized when the inlets are run with its cold air intake.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: standard hand tools; no cutting or drilling of factory parts is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan installation instructions for D760-0053 (Revision A, 4 December 2020): \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d760-0053.pdf?v=1788302515\"\u003eDownload PDF\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan publishes a single 2018–2025 application range covering the F90 M5 and the F91\/F92\/F93 M8; not every variant was offered in every year of that range. Dinan’s installation document (Revision A, 2020) covers the 2018–2020 F90 M5. Confirm your exact model and year with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD760-0053\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003eF91\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Competition\u003c\/td\u003e\n\u003ctd\u003eF91\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003eF92\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Competition\u003c\/td\u003e\n\u003ctd\u003eF92\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003eF93\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Competition\u003c\/td\u003e\n\u003ctd\u003eF93\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42750261493926,"sku":"D760-0053","price":675.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d760-0053_1.jpg?v=1652297815"},{"product_id":"dinan-cold-air-intake-2018-2022-bmw-m5","title":"Dinan Cold Air Intake – BMW M5 (F90)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan Carbon Fiber Cold Air Intake for the F90 M5 is a fully sealed induction system built almost entirely from gloss UV coated 2x2 carbon fiber. A functional secondary air inlet wishbone stretches across the engine compartment, feeding outside air from a central hood scoop into enlarged, carbon-fiber air boxes fitted with much larger filters — all while staying completely sealed off from hot engine compartment air.\u003c\/p\u003e\n\u003cp\u003eThe stock intake is adequate for stage 1 power levels, but the Dinan system still improves on it by reducing the pressure depression present in the factory system, so the turbochargers work less to reach the same target power: lower pre-turbine backpressure, lower shaft speeds, lower compressor discharge temperatures and headroom for higher boost pressure. Throttle response improves and the intake note picks up slightly, with the effect amplified further when the system is paired with Dinan’s carbon fiber turbo inlets.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: 637 CFM per bank versus 575 CFM stock at 28 in H2O — 11% greater than stock\u003c\/li\u003e\n\u003cli\u003eAir box volume: 31% larger than stock, fully sealed\u003c\/li\u003e\n\u003cli\u003eFilter area: 80 in² per side versus 56.5 in² stock — a 35% increase\u003c\/li\u003e\n\u003cli\u003eConstruction: gloss UV coated 2x2 carbon fiber air boxes, lids and wishbone\u003c\/li\u003e\n\u003cli\u003eSecondary air source: functional center wishbone inlet fed by a hood scoop behind the front grilles\u003c\/li\u003e\n\u003cli\u003eInstallation: bolt-on; Dinan published install time 2 hours\u003c\/li\u003e\n\u003cli\u003eBenefits claimed by Dinan: increased turbocharger efficiency, reliability and headroom, plus improved throttle response\u003c\/li\u003e\n\u003cli\u003eEmissions: Dinan states this part is legal under the provisions of EPA's Tampering Policy dated November 23rd, 2020, and is therefore legal for on-street use in states that accept those provisions. \u003cstrong\u003eNOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA.\u003c\/strong\u003e Dinan emissions code 7; no CARB Executive Order number is issued for this part.\u003c\/li\u003e\n\u003cli\u003eWarranty: Dinan covers the part for the remaining term of the vehicle manufacturer's new car limited warranty (typically 4 years \/ 50,000 miles) if the vehicle is still covered, otherwise 2 years \/ unlimited mileage from date of purchase. Maintenance and wear items, improper installation, racing use and competitive event damage are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber air box lids, left and right.\u003c\/li\u003e\n\u003cli\u003eEnlarged air boxes with Dinan high-flow filters.\u003c\/li\u003e\n\u003cli\u003eCarbon fiber secondary air inlet wishbone and snorkel tubing.\u003c\/li\u003e\n\u003cli\u003eGaskets, seals, foam tape, rubber seal, braces and mounting hardware.\u003c\/li\u003e\n\u003cli\u003eComplete kit as supplied by Dinan; see the installation instructions for the full bill of materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part; every seal, gasket and fastener needed is supplied in the kit.\u003c\/li\u003e\n\u003cli\u003eOptional pairing: \u003ca href=\"\/products\/dinan-carbon-fiber-turbo-inlet-pipes-f90-m5-f91-92-93-m8\"\u003eDinan Carbon Fiber Turbo Inlet Pipes\u003c\/a\u003e — Dinan notes the flow and efficiency gains of this intake are amplified when the turbo inlets are fitted as well.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: 16 mm and 18 mm sockets, T25 and T30 Torx bits, 2.5 mm Allen key, flat or Phillips screwdriver, pliers for the expanding rivets, and cutting shears or a rotary tool with a cut-off wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/94aed2864fc65a1968458a5ced145d04703b4ac0.pdf?v=1788302514\"\u003eDinan D760-0049 Cold Air Intake System installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe previous version of this listing also showed F91 \/ F92 \/ F93 M8 fitment. Dinan's current catalog entry for D760-0049 lists the F90 M5 only, so M8 rows have been removed — please confirm M8 fitment with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD760-0049\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5 (including Competition)\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2023\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42750450335910,"sku":"D760-0049","price":2599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d760-0049_1.jpg?v=1652301271"},{"product_id":"eventuri-black-carbon-intake-with-shroud-set-for-2018-bmw-f90-m5-f9x-m8-eve-f9xm5m8-cf-int","title":"Eventuri V2 Black Carbon Intake – BMW M5 (F90) \/ M8 (F92)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Eventuri F9X M5 \/ M8 V2 intake system was developed through extensive real world testing and airflow simulation analysis. It features sealed filter housings that maintain a steady IAT even while the car is stationary. The carbon shrouds that seal the housings, combined with Eventuri's scoop and heat shield arrangement, ensure unrestricted airflow while keeping inlet temperatures low through cold air saturation.\u003c\/p\u003e\n\u003cp\u003eLarge carbon front air scoops transfer ambient air directly into the intake area so the engine does not suffer from heat soak, and the gold heat-reflective lined shields carry integrated flow guides that direct that ambient air into the filters. Eventuri also increased the inlet tube cross sectional area by over 30% compared to the stock intake, feeding through the openings in the factory strut braces. This lets the turbos work with less restriction and reduces wastegate duty cycles.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: 736 CFM at 28\" H2O versus 620 CFM stock (Eventuri)\u003c\/li\u003e\n\u003cli\u003eEventuri testing: 60–130 mph reduced by 0.22 seconds — 8.48 s stock versus 8.26 s with the Eventuri system\u003c\/li\u003e\n\u003cli\u003eInlet tube cross sectional area increased by over 30% compared to stock\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri carbon fiber Venturi housings with integrated tubes, sealed for steady IATs\u003c\/li\u003e\n\u003cli\u003eTwo bespoke high flow Generation 2 filters\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber filter shrouds sealing the housings\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber air scoops feeding ambient air directly to the intake area\u003c\/li\u003e\n\u003cli\u003eTwo laser cut heat shields lined with gold heat reflective material\u003c\/li\u003e\n\u003cli\u003eLaser cut air ramps integrated into the heat shields to guide air into the filters\u003c\/li\u003e\n\u003cli\u003eTwo aluminum inlet cowls\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with OEM specification hose clamps\u003c\/li\u003e\n\u003cli\u003eSized to feed through the openings in the factory strut braces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Carbon fiber Venturi housings with integrated tubes\u003c\/li\u003e\n\u003cli\u003e2 x Bespoke high flow Generation 2 filters\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber filter shrouds\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber air scoops\u003c\/li\u003e\n\u003cli\u003e2 x Laser cut heat shields lined with gold heat reflective material\u003c\/li\u003e\n\u003cli\u003e2 x Laser cut air ramps integrated into the heat shields\u003c\/li\u003e\n\u003cli\u003e2 x Aluminum inlet cowls\u003c\/li\u003e\n\u003cli\u003eHigh quality silicone couplers and OEM specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Eventuri specifies no additional hardware for this part.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/eventuri-EVE-F9XM5M8-CF-INT-installation-instructions.pdf?v=1787176318\"\u003eEventuri BMW F90 M5 V2 Intake System – Installation Instructions (PDF)\u003c\/a\u003e — the guide Eventuri supplies for both the F90 M5 and F9X M8\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVE-F9XM5M8-CF-INT\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2017–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Coupe\u003c\/td\u003e\n\u003ctd\u003eF92\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Convertible\u003c\/td\u003e\n\u003ctd\u003eF91\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF93\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":43023477080230,"sku":"EVE-F9XM5M8-CF-INT","price":2345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/1_842de6de-9c86-4f07-8c9e-2efdbc36ebe1.webp?v=1656634580"}],"url":"https:\/\/speedlogicauto.com\/collections\/bmw-m8-f93-intakes-air-filters.oembed","provider":"SPEED LOGIC","version":"1.0","type":"link"}