{"title":"Dinan Suspension","description":null,"products":[{"product_id":"dinan-lightweight-tubular-anti-roll-bar-set-2015-2020-bmw-m2-m3-m4-f80-f82-f83-f87","title":"Dinan Lightweight Tubular Anti-Roll Bar Set – BMW M2 \/ M3 \/ M4 (F8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eNearly every modern street car leaves the factory with anti-roll bars, but they are tuned soft in the interest of ride comfort. Dinan builds and tunes each of its anti-roll bars specifically for the BMW chassis it is fitted to, cutting body roll so the car stays flatter through a corner while still allowing just enough roll to load the tires — for more mechanical grip and a more planted, confident feel at the limit.\u003c\/p\u003e\n\u003cp\u003eThe 32mm tubular front bar is adjustable from 57% to 103% stiffer than the stock 24.7mm bar across seven mounting positions, while the 24mm tubular rear bar is adjustable from 0% to 13% stiffer than the stock 22.9mm bar across three positions using the factory end links. Both bars use hollow tubular construction, delivering the larger diameter and higher rate without the weight penalty of a solid bar.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar: 32mm tubular (stock bar is 24.7mm)\u003c\/li\u003e\n\u003cli\u003eRear bar: 24mm tubular (stock bar is 22.9mm)\u003c\/li\u003e\n\u003cli\u003eFront adjustment range: 57% to 103% stiffer than stock\u003c\/li\u003e\n\u003cli\u003eRear adjustment range: 0% to 13% stiffer than stock\u003c\/li\u003e\n\u003cli\u003eFront bar has 4 holes with 7 possible mounting positions using the supplied adjustable end links\u003c\/li\u003e\n\u003cli\u003eRear bar has 3 holes with 3 possible mounting positions and uses the stock BMW end links\u003c\/li\u003e\n\u003cli\u003eTubular (hollow) construction for reduced weight\u003c\/li\u003e\n\u003cli\u003eEmissions: legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations\u003c\/li\u003e\n\u003cli\u003eDinan limited warranty: if the vehicle is still covered by the BMW new-car warranty, the part carries the remainder of that warranty up to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage. Wear items are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Front adjustable anti-roll bar, 32mm — D122-0600\u003c\/li\u003e\n\u003cli\u003e(1) Front hardware kit with adjustable end links — D133-0600\u003c\/li\u003e\n\u003cli\u003e(1) Rear adjustable anti-roll bar, 24mm — D122-0610\u003c\/li\u003e\n\u003cli\u003e(1) Rear hardware kit — D133-0610\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — the front bar ships with adjustable end links and the rear bar reuses the factory BMW end links.\u003c\/li\u003e\n\u003cli\u003eA four-wheel alignment check after installation is recommended good practice.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d120-0605.pdf?v=1788302499\"\u003eDinan D120-0605 Anti-Roll Bar Set — Front and Rear Installation Instructions (INS133-0600A \/ INS133-0610, Rev. 12\/10\/18) (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYears shown follow Dinan's official application list in the installation instructions for this part number. Please confirm fitment with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD120-0605\u003c\/strong\u003e — front and rear anti-roll bar set\u003c\/li\u003e\n\u003cli\u003eD120-0600 — front bar assembly (component of the set)\u003c\/li\u003e\n\u003cli\u003eD120-0610 — rear bar assembly (component of the set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37680009281702,"sku":"D120-0605","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0605_119276.jpg?v=1611955485"},{"product_id":"dinan-high-performance-adjustable-coil-over-suspension-system-2016-2020-bmw-m2-m2c","title":"Dinan Adjustable Coilover Suspension System – BMW M2 \/ M2C (F87)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan Adjustable Coil-Over Suspension was developed in the race lab and refined on the street. It reduces body roll substantially, limits dive under braking and squat under acceleration, and adds traction that builds confidence at higher speeds — without giving up the comfort that makes a car usable every day. Threaded collars let the installer set front and rear ride height precisely, with up to 1\" of drop in front and 1-1\/2\" in the rear (Dinan recommends 3\/4\" front and 1\/2\" rear to keep the ride civilized), while Dinan-spec progressive bump stops, included suspension packers and rear helper springs manage the added travel.\u003c\/p\u003e\n\u003cp\u003eThe machined components are 6061-T6 aluminum, black anodized for appearance and corrosion protection, and the stock upper spring mounts are retained for quiet operation.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded collars allow precise front and rear ride height adjustment\u003c\/li\u003e\n\u003cli\u003eLowering range: up to 1\" front and 1-1\/2\" rear, depending on tire clearance; Dinan recommends 3\/4\" front and 1\/2\" rear to maintain a civilized ride\u003c\/li\u003e\n\u003cli\u003eSpring rates approximately 18% stiffer in front and 5% stiffer in the rear than stock\u003c\/li\u003e\n\u003cli\u003eRear helper springs maintain proper suspension operation under droop\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers adjust bump-stop clearance to fine-tune handling and comfort\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights\u003c\/li\u003e\n\u003cli\u003eComponents machined from 6061-T6 aluminum and black anodized for appearance and corrosion protection\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts are reused for quiet operation\u003c\/li\u003e\n\u003cli\u003eFitment note from Dinan: specified for F87 cars without EDC \/ Adaptive M Suspension\u003c\/li\u003e\n\u003cli\u003eEmissions: legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations\u003c\/li\u003e\n\u003cli\u003eDinan limited warranty: if the vehicle is still covered by the BMW new-car warranty, the part carries the remainder of that warranty up to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage. Wear items are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Front springs — D100-0800\u003c\/li\u003e\n\u003cli\u003e(2) Rear springs — D103-0201\u003c\/li\u003e\n\u003cli\u003e(2) Helper springs — D101-0204\u003c\/li\u003e\n\u003cli\u003e(2) Spring dividers — D113-0027\u003c\/li\u003e\n\u003cli\u003e(2) Front threaded perch assemblies — D113-0021\u003c\/li\u003e\n\u003cli\u003e(2) Rear spring mount assemblies — D113-0022\u003c\/li\u003e\n\u003cli\u003e(1) Endlink mount kit, non-EDC — D113-0025\u003c\/li\u003e\n\u003cli\u003e(1) Coil-over hardware kit — D113-0024\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part on a non-EDC car; the endlink mount kit and coil-over hardware are included.\u003c\/li\u003e\n\u003cli\u003eA four-wheel alignment after installation is required good practice, and tire clearance must be checked at the chosen ride height — both performed by the installer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d190-8701.pdf?v=1788302499\"\u003eDinan D190-8701 Stage 1 Coil-Over Suspension Kit — Installation Instructions (INS190-8701, Rev. 12\/10\/18) (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/li\u003e\n\u003cli\u003eDinan specifies this kit for cars without EDC \/ Adaptive M Suspension, and states the M2 CS is not covered without additional components. Please confirm fitment with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD190-8701\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37680239935654,"sku":"D190-8701","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d190-8701_1.jpg?v=1611957312"},{"product_id":"dinan-suspension-link-kit-2015-2020-m2-m3-m4","title":"Dinan Suspension Link Kit – BMW M2 \/ M3 \/ M4 (2015-2020)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's high-performance Rear Suspension Link Kit adds precision and predictability at the limit. The stock rear toe link uses rubber bushings and a curved forged alloy rod that flexes under hard acceleration and braking, letting the rear wheels take on excessive toe change and making the car feel unstable. Dinan stops the flex by replacing the rubber bushings with Teflon-coated machined steel rod ends and the OEM curved bar with a straight billet aluminum rod — left- and right-hand thread lets rear toe be set quickly by turning the tube instead of fighting the factory eccentric adjusters.\u003c\/p\u003e\n\u003cp\u003eThe stock forward lower trailing links carry rubber bushings of their own that let the rear axle behave sloppily under load; Dinan replaces them with fixed-length billet aluminum rods on Teflon-coated rod ends. Rubber boots seal each rod end against dirt and road grime so the joints last.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the stock rear toe link and rubber bushings with a precision-machined black-anodized aluminum tube on racing-quality rod ends\u003c\/li\u003e\n\u003cli\u003eReplaces the stock forward lower trailing link and rubber bushings with a precision-machined black-anodized aluminum tube on racing-quality rod ends\u003c\/li\u003e\n\u003cli\u003eRod ends are Teflon-lined for quiet operation\u003c\/li\u003e\n\u003cli\u003eRod ends use left- and right-hand thread so rear toe is adjusted by turning the aluminum tube\u003c\/li\u003e\n\u003cli\u003eRear toe links are adjustable; trailing links are fixed length and are preset by Dinan — never to be adjusted\u003c\/li\u003e\n\u003cli\u003eRubber boots protect the rod ends from environmental damage\u003c\/li\u003e\n\u003cli\u003eImproves stability during hard cornering and response by eliminating rubber bushing deflection\u003c\/li\u003e\n\u003cli\u003eShipping weight: 10 lbs\u003c\/li\u003e\n\u003cli\u003eDinan published labor time: 4 hours\u003c\/li\u003e\n\u003cli\u003eFastener torque: 74 ft-lbs\u003c\/li\u003e\n\u003cli\u003eEmissions: \"This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.\"\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car warranty, the remainder of that warranty (typically 4 years\/50,000 miles); otherwise 2 years, unlimited mileage. Wear items, maintenance services and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × D283-0024 subframe (forward lower trailing) link assemblies with black nuts and boots\u003c\/li\u003e\n\u003cli\u003e2 × D283-0025 toe link assemblies with boots\u003c\/li\u003e\n\u003cli\u003e2 × BMW 33 32 6 760 668 flange nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-wheel alignment.\u003c\/strong\u003e Dinan requires the rear alignment to be reset after installation — rear toe is then set with the Dinan toe links rather than the factory eccentrics. Budget for this before ordering.\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 74 ft-lbs, and secure jack stands. Installer-supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d280-0015_r2.pdf?v=1788302499\" target=\"_blank\" rel=\"noopener\"\u003eDinan D280-0015 Rear Suspension Link Kit installation instructions (PDF)\u003c\/a\u003e — INS280-0015: bill of materials, removal and fitting sequence, torque specs and toe-setting procedure.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.\u003c\/li\u003e\n\u003cli\u003eYears shown are the applications listed in Dinan's installation instructions for this kit. Dinan also catalogs part D280-0015 for later G-chassis M2\/M3\/M4 models; confirm fitment for your car with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD280-0015\u003c\/strong\u003e — Dinan Rear Suspension Link Kit, F8x M3\/M4 and F87 M2\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Coupe\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37680411213990,"sku":"D280-0015","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d280-0015.jpg?v=1611958956"},{"product_id":"dinan-tension-strut-ball-joint-kit-2015-2020-bmw-m2-m3-m4","title":"Dinan Tension Strut Ball Joint Kit – BMW M2 \/ M3 \/ M4 (F8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan Tension Strut Ball Joint Kit gives the F8x M3\/M4 and F87 M2 responsiveness you can feel. It replaces the rubber bushings in the front thrust arms with precision ball joints carried in machined aluminum housings, eliminating the deflection built into the stock bushings and reducing brake shimmy at the same time.\u003c\/p\u003e\n\u003cp\u003eRoad feel usually comes at the cost of noise. These are among the quietest bearings on the market — virtually noise-free, so the car stays livable every day — and they are sealed with a rubber boot that keeps dirt and road grime out and stops them wearing out prematurely.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the front thrust arm (tension strut) rubber bushings with precision ball joints\u003c\/li\u003e\n\u003cli\u003eMachined aluminum ball joint housings\u003c\/li\u003e\n\u003cli\u003eNylon-lined bearings for quiet operation\u003c\/li\u003e\n\u003cli\u003eSealed with a rubber boot against dirt and road grime\u003c\/li\u003e\n\u003cli\u003eImproves steering responsiveness and reduces brake shimmy\u003c\/li\u003e\n\u003cli\u003eShipping weight: 5 lbs\u003c\/li\u003e\n\u003cli\u003eDinan published labor time: 2 hours\u003c\/li\u003e\n\u003cli\u003eRetaining cap torque: 110 ft-lbs, using the supplied Dinan cap tool; monoball bolts are angle-torqued per BMW specification\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car warranty, the remainder of that warranty (typically 4 years\/50,000 miles); otherwise 2 years, unlimited mileage. Wear items, maintenance services and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × D283-0027 ball joint \/ holder assembly (F80\/F82)\u003c\/li\u003e\n\u003cli\u003e2 × D282-0042 retaining cap\u003c\/li\u003e\n\u003cli\u003e4 × D282-0045 spacer\u003c\/li\u003e\n\u003cli\u003e1 × D282-0044 cap tool\u003c\/li\u003e\n\u003cli\u003e1 × D281-0003 Loctite 609 retaining compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan supplies the ball joint assemblies, caps, spacers, the cap tool and the Loctite 609 needed to complete the job.\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 110 ft-lbs, an angle gauge for the BMW angle-torque specification, and secure jack stands. Installer-supplied.\u003c\/li\u003e\n\u003cli\u003eOptional: have the front alignment checked once the thrust arms are back on the car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d280-0017.pdf?v=1788302507\" target=\"_blank\" rel=\"noopener\"\u003eDinan D280-0017 Tension Strut Ball Joint Kit installation instructions (PDF)\u003c\/a\u003e — INS280-0017 Rev. 12\/10\/18: bill of materials, bushing removal, bore preparation, cap tool use and torque specifications.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYears shown are the applications listed in Dinan's installation instructions for this kit; Dinan's catalog lists the part through the 2021 model year. Dinan publishes no emissions statement specific to this part number. Confirm fitment for your car with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD280-0017\u003c\/strong\u003e — Dinan Tension Strut Ball Joint Kit, F8x M3\/M4 and F87 M2\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Coupe\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37708937789606,"sku":"D280-0017","price":531.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d280-0017.jpg?v=1612300849"},{"product_id":"dinan-suspension-link-kit-2018-2021-bmw-m5","title":"Dinan Suspension Link Kit – BMW M5 (F90)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's high-performance Rear Suspension Link Kit adds precision and predictability at the limit. The stock rear toe link setup uses rubber bushings and a curved forged alloy rod that flexes easily; under hard acceleration and braking that flex allows excessive rear toe change and the car feels unstable. Dinan stops the flex by replacing the rubber bushings with Teflon-lined machined steel rod ends and swapping the OEM curved bar for a stouter billet aluminum arm.\u003c\/p\u003e\n\u003cp\u003eThe stock front trailing links carry rubber bushings of their own, and deflection there lets the rear axle behave sloppily under heavy load; Dinan replaces them with billet aluminum arms on precision ball joints of the same type used in the Dinan front monoball kit — for a more stable, planted F90 M5 without giving up ride quality or comfort.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the stock rear toe link and rubber bushings with a precision-machined black-anodized aluminum arm on racing-quality rod ends\u003c\/li\u003e\n\u003cli\u003eReplaces the stock forward lower trailing link and rubber bushings with a precision-machined black-anodized aluminum arm on precision ball joints\u003c\/li\u003e\n\u003cli\u003eRod ends are Teflon-lined and bearings are nylon-lined for quiet operation\u003c\/li\u003e\n\u003cli\u003eRubber boots protect the rod ends from environmental damage\u003c\/li\u003e\n\u003cli\u003eTrailing arm assemblies are preset to the correct length by Dinan and are never to be adjusted\u003c\/li\u003e\n\u003cli\u003eLeft and right toe link assemblies are different and side-specific\u003c\/li\u003e\n\u003cli\u003eImproves stability during hard cornering and response by eliminating rubber bushing deflection\u003c\/li\u003e\n\u003cli\u003eShipping weight: 10 lbs; carton approx. 22\" × 12\" × 4\"\u003c\/li\u003e\n\u003cli\u003eDinan published labor time: 3 hours\u003c\/li\u003e\n\u003cli\u003eEmissions: \"This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.\"\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car warranty, the remainder of that warranty (typically 4 years\/50,000 miles); otherwise 2 years, unlimited mileage. Wear items, maintenance services and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × D283-0032 trailing arm assembly\u003c\/li\u003e\n\u003cli\u003e1 × D283-0033 toe link assembly, left\u003c\/li\u003e\n\u003cli\u003e1 × D283-0034 toe link assembly, right\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-wheel alignment.\u003c\/strong\u003e Dinan requires the alignment to be reset per BMW procedure after installation. Budget for this before ordering.\u003c\/li\u003e\n\u003cli\u003eTorque wrench and secure jack stands — Dinan warns against working on a vehicle supported by a jack alone. Installer-supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d280-0020.pdf?v=1788302507\" target=\"_blank\" rel=\"noopener\"\u003eDinan D280-0020 Rear Suspension Link Kit installation instructions (PDF)\u003c\/a\u003e — INS280-0020 Rev. 08\/27\/21: bill of materials, left\/right toe link identification, fitting sequence and alignment requirement.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThis listing is titled for the F90 M5; Dinan catalogs the same kit for the F91\/F92\/F93 M8. Confirm fitment for your car with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD280-0020\u003c\/strong\u003e — Dinan Rear Suspension Link Kit, F90 M5 and F9x M8\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5 \/ M5 Competition\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Coupe \/ M8 Competition Coupe\u003c\/td\u003e\n\u003ctd\u003eF92\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Convertible \/ M8 Competition Convertible\u003c\/td\u003e\n\u003ctd\u003eF91\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Gran Coupe \/ M8 Competition Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF93\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37709446545574,"sku":"D280-0020","price":1299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d280-0020_1.jpg?v=1612306982"},{"product_id":"dinan-tension-strut-ball-joint-kit-2018-2021-bmw-m5","title":"Dinan Tension Strut Ball Joint Kit – BMW M5 (F90)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAn underrated component of a proper driver's suspension, the monoball kit — tension strut ball joint kit in today's terminology — is a remnant of an era when road feel was something drivers sought out, as the road-racing heritage of BMW M demanded. Dinan embraced that and spent years refining a kit that satisfies the desire for road feel while staying livable every day.\u003c\/p\u003e\n\u003cp\u003eThe Dinan Tension Strut Ball Joint Kit replaces the rubber bushings in the front thrust arms with precision ball joints in machined aluminum housings. Eliminating the deflection inherent in the stock bushings sharpens response and reduces brake shimmy. The bearings are among the quietest on the market, virtually noise-free, and they are sealed with a rubber boot that keeps dirt and road grime out so they do not wear out prematurely.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the front thrust arm (tension strut) rubber bushings with precision ball joints\u003c\/li\u003e\n\u003cli\u003eMachined aluminum ball joint housings\u003c\/li\u003e\n\u003cli\u003eNylon-lined bearings for quiet operation\u003c\/li\u003e\n\u003cli\u003eSealed with a rubber boot against dirt and road grime\u003c\/li\u003e\n\u003cli\u003eImproves steering responsiveness and reduces brake shimmy\u003c\/li\u003e\n\u003cli\u003eShipping weight: 5 lbs; carton approx. 14\" × 12\" × 4\"\u003c\/li\u003e\n\u003cli\u003eDinan published labor time: 4 hours\u003c\/li\u003e\n\u003cli\u003eRetaining cap torque: 110 ft-lbs, using the supplied Dinan cap tool; ball joint bolts are angle-torqued per BMW specification\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car warranty, the remainder of that warranty (typically 4 years\/50,000 miles); otherwise 2 years, unlimited mileage. Wear items, maintenance services and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × D283-0029 ball joint holder assembly\u003c\/li\u003e\n\u003cli\u003e2 × D282-0042 retaining cap\u003c\/li\u003e\n\u003cli\u003e4 × D282-0043 spacer\u003c\/li\u003e\n\u003cli\u003e1 × D282-0044 cap tool\u003c\/li\u003e\n\u003cli\u003e1 × D281-0003 Loctite 609 retaining compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan supplies the ball joint assemblies, caps, spacers, the cap tool and the Loctite 609 needed to complete the job.\u003c\/li\u003e\n\u003cli\u003eTorque wrench capable of 110 ft-lbs, an angle gauge for the BMW angle-torque specification, and secure jack stands. Installer-supplied.\u003c\/li\u003e\n\u003cli\u003eSolvent and clean rags — the control arm bore must be thoroughly cleaned and dried before the ball joint is set. Installer-supplied.\u003c\/li\u003e\n\u003cli\u003eOptional: have the front alignment checked once the thrust arms are back on the car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d280-0019_r2.pdf?v=1788302507\" target=\"_blank\" rel=\"noopener\"\u003eDinan D280-0019 Tension Strut Ball Joint Kit installation instructions (PDF)\u003c\/a\u003e — INS280-0019: bill of materials, bore preparation, ball joint orientation, cap tool use and torque specifications.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThis listing is titled for the F90 M5; Dinan catalogs the same kit for the F91\/F92\/F93 M8. Dinan publishes no emissions statement specific to this part number. Confirm fitment for your car with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD280-0019\u003c\/strong\u003e — Dinan Tension Strut Ball Joint Kit, F90 M5 and F9x M8\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5 \/ M5 Competition\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Coupe \/ M8 Competition Coupe\u003c\/td\u003e\n\u003ctd\u003eF92\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Convertible \/ M8 Competition Convertible\u003c\/td\u003e\n\u003ctd\u003eF91\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM8 Gran Coupe \/ M8 Competition Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF93\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2020–2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37709451821222,"sku":"D280-0019","price":519.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d280-0019_1.jpg?v=1612307094"},{"product_id":"dinan-high-performance-adjustable-coil-over-suspension-system-2018-2021-bmw-m5","title":"Dinan Adjustable Coilover Suspension System – BMW M5 (F90)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan High Performance Adjustable Coil-Over Suspension System was developed in the race lab and refined on the street. It replaces the factory springs with a more aggressive set and adds threaded collars so ride height can be dialed in front and rear, delivering a substantial reduction in body roll along with less dive under braking and less squat under acceleration. The design retains and works exclusively with the F90 M5's factory electronic (EDC) dampers, replacing the progressive-rate rear springs with a more predictable linear-rate design; Dinan-spec progressive bump stops and helper springs manage up to two inches of front drop and 2-1\/8 inches at the rear, though Dinan recommends 1 inch front and 1-1\/8 inch rear to retain the ride quality its suspension kits are known for.\u003c\/p\u003e\n\u003cp\u003eSuspension packers are included so bump-stop clearance can be fine-tuned for handling and comfort. The adjustable components are machined from 6061-T6 aluminum and black anodized for corrosion protection, and the stock upper spring mounts are retained for quiet operation.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLowering range: up to 2 in front and 2-1\/8 in rear; Dinan’s recommended setting is 1 in front and 1-1\/8 in rear\u003c\/li\u003e\n\u003cli\u003eSpring rates: 20% stiffer in front, 15% stiffer in the rear\u003c\/li\u003e\n\u003cli\u003eRear springs are linear rate (the factory rear springs are progressive rate)\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for cars with the factory BMW electronic (EDC) dampers — the stock shocks are retained\u003c\/li\u003e\n\u003cli\u003eHelper springs front and rear maintain proper suspension operation under droop\u003c\/li\u003e\n\u003cli\u003eThreaded collars and perches machined from 6061-T6 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops plus suspension packers for bump-stop clearance adjustment\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts retained for quiet operation\u003c\/li\u003e\n\u003cli\u003eDinan published installation labor: 9.2 hours\u003c\/li\u003e\n\u003cli\u003eKit weight: 41 lb\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car limited warranty (4 years\/50,000 miles), Dinan products are warranted for the remaining term of that warranty; otherwise Dinan Performance Products carry a 2-year, unlimited-mileage warranty from the date of original purchase. Wear and maintenance items — friction materials, filters, fluids, spark plugs, drive belts and bulbs — are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × D100-0830 front springs\u003c\/li\u003e\n\u003cli\u003e2 × D100-0832 rear springs\u003c\/li\u003e\n\u003cli\u003e4 × D101-0207 helper spring 363\u003c\/li\u003e\n\u003cli\u003e1 × D113-0028 F90 coil-over hardware kit\u003c\/li\u003e\n\u003cli\u003e4 × D113-0029 threaded perch assembly, F90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory BMW electronic (EDC) dampers.\u003c\/strong\u003e This is a Stage 1 coil-over kit that works only with the car’s original electronic shocks; no dampers are supplied and Dinan states it must not be used on other applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire and fender clearance evaluation.\u003c\/strong\u003e Dinan requires the installer to verify clearance under all conditions before the car is driven, particularly at the lower end of the adjustment range.\u003c\/li\u003e\n\u003cli\u003eFour-wheel alignment — Speed Logic recommends a full alignment after installation and after any later ride-height change.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: spring compressor, torque wrench and the standard BMW suspension service tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan installation instructions INS190-0901 (Rev 06\/10\/19): \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/2a7314ecf782f95511e073aea792b8fafee8d46c.pdf?v=1788302507\"\u003eDownload PDF\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/li\u003e\n\u003cli\u003eDinan currently catalogs D190-0901 for the 2018–2023 F90 M5, while the supplied installation document (Rev 06\/10\/19) covers the 2018–19 F90 M5. Confirm your model year and that your car has the factory electronic dampers with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD190-0901\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003eF90\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2018–2023\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37709838975142,"sku":"D190-0901","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d190-0901_1.jpg?v=1612313315"},{"product_id":"dinan-anti-roll-bar-set-2013-2020-bmw-228i-230i-m235i-m240i-320i-328i-330i-335i-340i-428i-430i-435i-440i-xdrive","title":"Dinan Lightweight Tubular Anti-Roll Bars (D120-0595) – BMW 2 \/ 3 \/ 4 Series xDrive (F2x \/ F3x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost every modern car leaves the factory with anti-roll bars, but they are deliberately soft in the interest of comfort. Every Dinan anti-roll bar is built and tuned for a specific BMW chassis. Keeping the car flatter through a corner — while still allowing just enough roll — improves mechanical grip and gives the driver a much more planted, confident feeling.\u003c\/p\u003e\n\u003cp\u003eThe 25mm front bar for xDrive cars is adjustable across three mounting positions and runs from 45% to 93% stiffer than the stock front bar depending on which model it is fitted to. The 19mm rear bar is also a three-position bar and is adjustable from 359% to 474% stiffer than the 12mm factory rear bar. Both bars are tubular, so the added stiffness comes with a weight saving rather than a weight penalty, and both use the stock BMW end links.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar: 25mm tubular, three-hole adjustable (stock front bar is 22.5–25mm depending on application)\u003c\/li\u003e\n\u003cli\u003eRear bar: 19mm tubular, three-hole adjustable (stock rear bar is 12mm)\u003c\/li\u003e\n\u003cli\u003eFront adjustment on M235i\/M240i (23.6mm stock bar): 45% to 74% stiffer than stock\u003c\/li\u003e\n\u003cli\u003eFront adjustment on 228i\/230i\/320i\/328i\/330i\/428i\/430i (22.5mm stock bar): 61% to 93% stiffer than stock\u003c\/li\u003e\n\u003cli\u003eFront adjustment on 335i\/340i\/435i\/440i (22.5mm stock bar): 54% to 84% stiffer than stock\u003c\/li\u003e\n\u003cli\u003eRear adjustment: 359% to 474% stiffer than the stock rear bar\u003c\/li\u003e\n\u003cli\u003eTubular (hollow) construction; three mounting positions per bar\u003c\/li\u003e\n\u003cli\u003eUses the stock BMW end links\u003c\/li\u003e\n\u003cli\u003eDinan states the set is not compatible with RWD vehicles or with the wagon and Gran Turismo body styles\u003c\/li\u003e\n\u003cli\u003eDinan published installation labor: 7.4 hours\u003c\/li\u003e\n\u003cli\u003eKit weight: 30 lb\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car limited warranty (4 years\/50,000 miles), Dinan products are warranted for the remaining term of that warranty; otherwise Dinan Performance Products carry a 2-year, unlimited-mileage warranty from the date of original purchase. Wear and maintenance items — friction materials, filters, fluids, spark plugs, drive belts and bulbs — are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × D122-0587 front anti-roll bar\u003c\/li\u003e\n\u003cli\u003e1 × D133-0587 front hardware kit\u003c\/li\u003e\n\u003cli\u003e1 × D122-0590 rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003e1 × D133-0590 rear hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — front and rear hardware kits are supplied and the factory BMW end links are reused.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: standard hand tools, torque wrench and a vehicle lift or jack stands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan installation instructions INS133-0587 (front bar) and INS133-0590 (rear bar): \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d120-0595.pdf?v=1788302507\"\u003eDownload PDF\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eThe year ranges shown are the model-family ranges Dinan publishes for D120-0595 (2012–2018 for the 3-Series, 2014–2020 for the 4-Series and 2014–2021 for the 2-Series); an individual model was not offered in every year of its family range. This is an xDrive-only set — Dinan states it does not fit RWD cars or the wagon and Gran Turismo body styles. Confirm your exact model year with Speed Logic.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD120-0595\u003c\/strong\u003e — front and rear anti-roll bar set\u003c\/li\u003e\n\u003cli\u003eD120-0587 — front bar assembly (as identified in the Dinan installation document)\u003c\/li\u003e\n\u003cli\u003eD120-0590 — rear bar assembly (as identified in the Dinan installation document)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e228i xDrive\u003c\/td\u003e\n\u003ctd\u003eF22\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e230i xDrive\u003c\/td\u003e\n\u003ctd\u003eF22\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM235i xDrive\u003c\/td\u003e\n\u003ctd\u003eF22\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i xDrive\u003c\/td\u003e\n\u003ctd\u003eF22\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e228i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF23\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e230i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF23\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM235i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF23\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF23\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e320i xDrive\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i xDrive\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e330i xDrive\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eB48 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i xDrive\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e340i xDrive\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e428i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e430i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e435i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e428i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF33\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e430i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF33\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e435i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF33\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i xDrive Convertible\u003c\/td\u003e\n\u003ctd\u003eF33\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e428i xDrive Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF36\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e430i xDrive Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF36\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L Turbo I4\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e435i xDrive Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF36\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i xDrive Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF36\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37709879247014,"sku":"D120-0595","price":999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0595_119276.jpg?v=1612313887"},{"product_id":"dinan-performance-spring-set-bmw-435i-440i-xdrive","title":"Dinan Performance Spring Set – BMW 435i \/ 440i xDrive (F32)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan suspension systems are known for transforming a car’s stance while maintaining ride quality and improving handling. The Performance Spring Set for the F32 435i\/440i xDrive lowers the car 3\/4 in at the front and a full inch at the rear for a more aggressive stance and improved suspension geometry, using springs CNC wound from high-tensile chrome silicon wire and shot-peened for stress relief so they last the life of the car. Dinan sells the components separately but strongly recommends this spring set be paired with the matching Ride Quality and Handling Kit to preserve suspension travel and ride quality.\u003c\/p\u003e\n\u003cp\u003eThe 38% increase in front spring rate and 50% increase at the rear reduce rear suspension compression under acceleration and front-end dive under braking, giving the car a more controlled feel with noticeably improved grip in high-speed driving and more responsive steering from low speeds all the way to the top of the range.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLowers the vehicle 3\/4 in at the front and 1 in at the rear\u003c\/li\u003e\n\u003cli\u003eFront spring rate increased 38%; rear spring rate increased 50%\u003c\/li\u003e\n\u003cli\u003eCNC wound from high-tensile chrome silicon wire and shot-peened for stress relief\u003c\/li\u003e\n\u003cli\u003ePreset at the factory to prevent spring sag\u003c\/li\u003e\n\u003cli\u003eCompatible with both conventional and factory electronic (EDC) shocks\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll\u003c\/li\u003e\n\u003cli\u003eDinan states the set is not compatible with RWD models or convertible variants\u003c\/li\u003e\n\u003cli\u003eDinan published installation labor: 8.2 hours\u003c\/li\u003e\n\u003cli\u003eKit weight: 25 lb\u003c\/li\u003e\n\u003cli\u003eDinan emissions statement: “This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.”\u003c\/li\u003e\n\u003cli\u003eDinan warranty: on a vehicle still covered by the BMW new-car limited warranty (4 years\/50,000 miles), Dinan products are warranted for the remaining term of that warranty; otherwise Dinan Performance Products carry a 2-year, unlimited-mileage warranty from the date of original purchase. Wear and maintenance items — friction materials, filters, fluids, spark plugs, drive belts and bulbs — are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete front and rear Dinan performance coil spring set as supplied by Dinan.\u003c\/li\u003e\n\u003cli\u003eSee the Dinan installation documentation supplied with the kit for the full bill of materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDinan Supplemental Ride Quality and Handling Kit (Dinan part D193-3201 for F32 cars).\u003c\/strong\u003e Dinan specifies this kit alongside the spring set to achieve the advertised ride height and ride quality; without it Dinan will not warrant handling or ride-quality complaints. It is not currently a listed product at Speed Logic — contact us and we will source it with your springs.\u003c\/li\u003e\n\u003cli\u003eFour-wheel alignment — Speed Logic recommends a full alignment after installation and after any later ride-height change.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: spring compressor, torque wrench and the standard BMW suspension service tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan D100-0920 suspension specification sheet (the reference document Dinan publishes for this spring set): \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d100-0920.pdf?v=1788302514\"\u003eDownload PDF\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDinan supplies printed installation instructions in the box with the kit. Speed Logic could not confirm a separate downloadable installation PDF for D100-0920 — contact us if you need a copy before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNOTE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While Dinan will maintain a full warranty on product defects, any claims against the car’s improper handling or ride quality traits due to not purchasing the corresponding handling kit will not be warranted.\u003c\/li\u003e\n\u003cli\u003eDinan does not publish model years for D100-0920 in a form Speed Logic could confirm, so the Years column is left blank rather than estimated. This is an xDrive-only spring set and Dinan states it does not fit RWD or convertible variants. Please confirm fitment with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD100-0920\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e435i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i xDrive\u003c\/td\u003e\n\u003ctd\u003eF32\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37709926695078,"sku":"D100-0920","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d100-0920_1.jpg?v=1612314322"},{"product_id":"dinan-high-performance-adjustable-coil-over-suspension-system-2012-2019-bmw-m5-m6-gran-coupe","title":"Dinan Adjustable Coilover Suspension System – BMW M5 \/ M6 Gran Coupe (F10\/F06)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe Dinan Adjustable Coil-Over Suspension was developed in the race lab and refined on the street for versatility. The added traction inspires confidence at higher speeds, and the substantial reduction in body roll, dive under braking and squat under acceleration is what Dinan builds the kit around: superior handling and performance without giving up comfort.\u003c\/p\u003e\n\u003cp\u003eDinan's design keeps the factory Electronic Damper Control shocks in place and adds threaded collars so ride height can be changed by the user. The result is a lowered stance with improved handling. Springs, progressive bump stops and the supporting components increase travel so the car can be lowered up to 1.25 in on the M5 and 1.125 in on the M6. Suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump stops. The machined components are made from 6061-T6 aluminum and black anodized for appearance and corrosion protection.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpring rates: 15% stiffer than stock, front and rear\u003c\/li\u003e\n\u003cli\u003eMaximum lowering, M5: up to 1-1\/4 in depending on tire clearance; Dinan recommends a 3\/4 in drop to maintain ride quality\u003c\/li\u003e\n\u003cli\u003eMaximum lowering, M6: up to 1-1\/8 in depending on tire clearance; Dinan recommends a 5\/8 in drop to maintain ride quality\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: threaded collars allow precise front and rear ride height adjustment\u003c\/li\u003e\n\u003cli\u003eMaterials: machined 6061-T6 aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003eDamping: retains and is compatible with the factory BMW EDC shocks\u003c\/li\u003e\n\u003cli\u003eBump stops: Dinan-spec progressive bump stops improve ride quality at lowered ride heights; included suspension packers adjust bump stop clearance\u003c\/li\u003e\n\u003cli\u003eDinan published install time: 8.9 hours\u003c\/li\u003e\n\u003cli\u003eEmissions: Dinan states this part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles (Dinan emissions code 5). No CARB Executive Order number is published for this part.\u003c\/li\u003e\n\u003cli\u003eWarranty: Dinan covers the part for the remaining term of the vehicle manufacturer's new car limited warranty (typically 4 years \/ 50,000 miles) if the vehicle is still covered, otherwise 2 years \/ unlimited mileage from date of purchase. Maintenance and wear items, improper installation, racing use and competitive event damage are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Front springs (D100-0781)\u003c\/li\u003e\n\u003cli\u003e2 x Rear springs (D100-0785)\u003c\/li\u003e\n\u003cli\u003e2 x Helper springs (D101-0207)\u003c\/li\u003e\n\u003cli\u003e2 x Front threaded perch assemblies (D113-0019)\u003c\/li\u003e\n\u003cli\u003e2 x Rear threaded perch assemblies (D113-0020A)\u003c\/li\u003e\n\u003cli\u003e1 x M5 coil-over hardware kit (D113-0018A), including suspension packers and progressive bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory EDC shocks\u003c\/strong\u003e — Dinan's instructions state these components are designed to work in conjunction with the stock BMW EDC front and rear shocks and must not be used for other applications. The vehicle must be EDC equipped; the shocks are reused, not supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-wheel alignment\u003c\/strong\u003e — required after installation and after any subsequent ride height change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTire and fender clearance check\u003c\/strong\u003e — per Dinan's warning above, clearance must be verified at full lock and full suspension compression before the car is driven, especially with aftermarket wheel and tire packages.\u003c\/li\u003e\n\u003cli\u003eOptional pairing: \u003ca href=\"\/products\/dinan-lightweight-tubular-anti-roll-bar-set-2012-2019-bmw-m5-m6\"\u003eDinan Lightweight Tubular Anti-Roll Bar Set\u003c\/a\u003e for the same platform.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: spring compressor, torque wrench, vehicle lift and the standard BMW suspension service tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d190-1011.pdf?v=1788302514\"\u003eDinan D190-1011 Coil-Over Suspension Kit installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/li\u003e\n\u003cli\u003eDinan lists this kit for EDC-equipped cars only, and its installation instructions cite a narrower 2013–2015 build range than the catalog listing. Confirm your car's damper configuration and build date with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD190-1011\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003eF10\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2012–2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM6 Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF06\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2014–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42750728831142,"sku":"D190-1011","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d190-1011_1.jpg?v=1652307924"},{"product_id":"dinan-lightweight-tubular-anti-roll-bar-set-2012-2019-bmw-m5-m6","title":"Dinan Lightweight Tubular Anti-Roll Bar Set – BMW M5 \/ M6 (F10\/F06\/F12\/F13)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost every street car leaves the factory with anti-roll bars, but they are tuned soft for maximum comfort. Every Dinan tuned anti-roll bar is built and calibrated specifically for the BMW chassis it fits, cutting body roll to keep the car more level than stock while still allowing just enough roll to improve mechanical grip — giving the driver a far more planted and confident feeling in every corner.\u003c\/p\u003e\n\u003cp\u003eThis set pairs a 28 mm lightweight tubular adjustable front bar, 44% lighter than a solid bar of comparable stiffness and adjustable from 35% to 53% stiffer than stock, with a 22 mm lightweight tubular adjustable rear bar, 29% lighter than a solid bar of comparable stiffness and adjustable from 39% to 72% stiffer than stock. The front is a two-hole bar with three mounting positions and adjustable end links; the rear is a three-hole bar with three mounting positions using the stock BMW end links.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar diameter: 28 mm (stock bar is 24.5 mm)\u003c\/li\u003e\n\u003cli\u003eRear bar diameter: 22 mm (stock bar is 21.5 mm)\u003c\/li\u003e\n\u003cli\u003eFront adjustment range: 35% to 53% stiffer than stock, two hole bar with three possible mounting positions\u003c\/li\u003e\n\u003cli\u003eRear adjustment range: 39% to 72% stiffer than stock, three hole bar with three possible mounting positions\u003c\/li\u003e\n\u003cli\u003eFront weight saving: 44% lighter than a solid bar of comparable stiffness\u003c\/li\u003e\n\u003cli\u003eRear weight saving: 29% lighter than a solid bar of comparable stiffness\u003c\/li\u003e\n\u003cli\u003eConstruction: tubular (hollow)\u003c\/li\u003e\n\u003cli\u003eEnd links: adjustable length, left and right hand threaded, supplied for the front; the rear uses the stock BMW end links\u003c\/li\u003e\n\u003cli\u003eDinan published install time: 3.2 hours\u003c\/li\u003e\n\u003cli\u003eEmissions: Dinan publishes no CARB Executive Order number for this part.\u003c\/li\u003e\n\u003cli\u003eWarranty: Dinan covers the part for the remaining term of the vehicle manufacturer's new car limited warranty (typically 4 years \/ 50,000 miles) if the vehicle is still covered, otherwise 2 years \/ unlimited mileage from date of purchase. Maintenance and wear items, improper installation, racing use and competitive event damage are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront kit (D133-0540C): 1 x 28 mm tubular adjustable front anti-roll bar (D122-0540), 2 x bushings, 2 x bushing brackets, 2 x Zerk fittings, urethane packet, adjustable end link assemblies and 4 x hex nuts.\u003c\/li\u003e\n\u003cli\u003eRear kit (D133-0550): 1 x 22 mm tubular adjustable rear anti-roll bar (D122-0550) and hardware kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — the front kit ships with its own adjustable end links, bushings and brackets, and the rear bar reuses the stock BMW end links.\u003c\/li\u003e\n\u003cli\u003eOptional pairing: \u003ca href=\"\/products\/dinan-high-performance-adjustable-coil-over-suspension-system-2012-2019-bmw-m5-m6-gran-coupe\"\u003eDinan High Performance Adjustable Coil-Over Suspension System\u003c\/a\u003e for the same platform.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: vehicle lift or jack stands, standard metric hand tools, torque wrench and a grease gun for the Zerk fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d120-0560.pdf?v=1788302514\"\u003eDinan D120-0560 Anti-Roll Bar Set installation instructions, front D120-0540 and rear D120-0550 (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eYears above follow Dinan's catalog listing for the D120-0560 set. Dinan's installation instructions cite narrower build ranges for the individual bars (front 2012–2016, M6 Gran Coupe 2013–2016; rear 2012–2014, M6 Gran Coupe 2013–2014). Confirm fitment for your build date with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD120-0560\u003c\/strong\u003e — front and rear set\u003c\/li\u003e\n\u003cli\u003eD120-0540 — front anti-roll bar (component number)\u003c\/li\u003e\n\u003cli\u003eD120-0550 — rear anti-roll bar (component number)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003eF10\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2012–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM6 Gran Coupe\u003c\/td\u003e\n\u003ctd\u003eF06\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2013–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003eF12\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2012–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003eF13\u003c\/td\u003e\n\u003ctd\u003eS63 4.4L Twin-Turbo V8\u003c\/td\u003e\n\u003ctd\u003e2012–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42750809374886,"sku":"D120-0560","price":1065.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0560_1.jpg?v=1652309017"},{"product_id":"dinan-anti-roll-bar-set-2012-2021-bmw-228i-230i-m235i-m240i-320i-328i-330i-335i-340i-428i-430i-435i-440i","title":"Dinan Anti-Roll Bar Set – BMW 2 \/ 3 \/ 4-Series (F22\/F23\/F30\/F32\/F33\/F36)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost every modern street car leaves the factory with anti-roll bars, but they are tuned soft for maximum comfort. An anti-roll bar does exactly what its name says by reducing body roll in all situations, and every Dinan bar is built and tuned specifically for the BMW chassis it fits — keeping the car more level than stock while still allowing just enough roll to improve mechanical grip, for a far more planted and confident feel in every corner.\u003c\/p\u003e\n\u003cp\u003eThis set pairs a 28 mm lightweight tubular adjustable front bar, adjustable from 45% to 97% stiffer than stock depending on application, with a 19 mm lightweight tubular adjustable rear bar, adjustable from 84% to 474% stiffer than stock depending on application. Both bars are three-hole designs that mount in three different positions using the stock BMW end links.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar: 28 mm diameter, tubular, three-hole adjustable (stock bar is 21.2 to 24.2 mm depending on application)\u003c\/li\u003e\n\u003cli\u003eFront bar adjustment range: 45% to 97% stiffer than stock, depending on application\u003c\/li\u003e\n\u003cli\u003eRear bar: 19 mm diameter, tubular, three-hole adjustable (stock bar is 12 to 15 mm depending on application)\u003c\/li\u003e\n\u003cli\u003eRear bar adjustment range: 84% to 474% stiffer than stock, depending on application\u003c\/li\u003e\n\u003cli\u003eTubular (hollow) construction for reduced weight\u003c\/li\u003e\n\u003cli\u003eThree mounting positions per bar, used with the stock BMW end links\u003c\/li\u003e\n\u003cli\u003eShipping dimensions: 40 in L x 10 in W x 4 in H\u003c\/li\u003e\n\u003cli\u003eWeight: 30 lb\u003c\/li\u003e\n\u003cli\u003eDinan labor time: 7.1 hours\u003c\/li\u003e\n\u003cli\u003eDinan limited warranty: the remainder of the BMW new-car limited warranty, up to 4 years \/ 50,000 miles, if the vehicle is still covered by the factory warranty; otherwise 2 years \/ unlimited mileage. Wear items are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) D120-0580 front 28 mm three-hole adjustable anti-roll bar\u003c\/li\u003e\n\u003cli\u003e(1) D133-0580 front anti-roll bar hardware kit\u003c\/li\u003e\n\u003cli\u003e(1) D122-0590 rear 19 mm three-hole adjustable anti-roll bar\u003c\/li\u003e\n\u003cli\u003e(1) D133-0590 rear anti-roll bar hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part; both bars mount with the supplied hardware kits and the stock BMW end links.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d120-0585.pdf?v=1788302518\"\u003eDinan Anti-Roll Bar Set Installation Instructions, front INS133-0580 and rear INS133-0590 (Rev. 06\/09\/16) - PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eDinan labor time: 7.1 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan's installation instructions state the front 28 mm bar is not applicable to any xDrive vehicle; the rear 19 mm bar does cover xDrive applications. Confirm fitment with Speed Logic before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD120-0585\u003c\/strong\u003e - anti-roll bar set\u003c\/li\u003e\n\u003cli\u003eD120-0580 - front bar, supplied in the set\u003c\/li\u003e\n\u003cli\u003eD122-0590 - rear bar, supplied in the set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e228i\u003c\/td\u003e\n\u003ctd\u003eF22 \/ F23\u003c\/td\u003e\n\u003ctd\u003eN20 \/ N26 2.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e230i\u003c\/td\u003e\n\u003ctd\u003eF22 \/ F23\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM235i\u003c\/td\u003e\n\u003ctd\u003eF22 \/ F23\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i\u003c\/td\u003e\n\u003ctd\u003eF22 \/ F23\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e320i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN20 2.0L\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN20 \/ N26 2.0L\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e330i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eB48 2.0L\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e340i\u003c\/td\u003e\n\u003ctd\u003eF30\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2012–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e428i\u003c\/td\u003e\n\u003ctd\u003eF32 \/ F33 \/ F36\u003c\/td\u003e\n\u003ctd\u003eN20 \/ N26 2.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e430i\u003c\/td\u003e\n\u003ctd\u003eF32 \/ F33 \/ F36\u003c\/td\u003e\n\u003ctd\u003eB46 2.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e435i\u003c\/td\u003e\n\u003ctd\u003eF32 \/ F33 \/ F36\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i\u003c\/td\u003e\n\u003ctd\u003eF32 \/ F33 \/ F36\u003c\/td\u003e\n\u003ctd\u003eB58 3.0L\u003c\/td\u003e\n\u003ctd\u003e2014–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42759811334310,"sku":"D120-0585","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0585_119276.jpg?v=1652477887"},{"product_id":"dinan-lightweight-tubular-anti-roll-bar-bmw-1m-m3","title":"Dinan Lightweight Tubular Anti-Roll Bar – BMW 1M \/ M3 (E82\/E90\/E92\/E93)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost all street cars leave the factory with anti-roll bars, but they are tuned soft for maximum comfort. An anti-roll bar reduces body roll, and every Dinan bar is built and tuned for a specific BMW chassis. Keeping the car flatter than stock — while still allowing just enough roll — improves mechanical grip and gives the driver a far more planted, confident feeling in every corner.\u003c\/p\u003e\n\u003cp\u003eThis Lightweight Tubular Adjustable Front Anti-Roll Bar reduces body roll and saves weight at the same time: it is 42% lighter than a solid bar of comparable stiffness and adjusts from 50% to 90% stiffer than the stock bar. The three-hole bar can be mounted in five different positions, and the supplied end links use left- and right-hand threads for easy length adjustment. It may be added to the Dinan Stage 1 Suspension System for owners building a high-performance suspension in phases.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e32mm tubular front anti-roll bar\u003c\/li\u003e\n\u003cli\u003eAdjustable from \u003cstrong\u003e50% to 90% stiffer than stock\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e3-hole bar with 5 possible mounting positions\u003c\/li\u003e\n\u003cli\u003eSupplied end links are left- and right-hand threaded for length adjustment\u003c\/li\u003e\n\u003cli\u003eTubular (hollow) construction — 42% lighter than a solid bar of comparable stiffness\u003c\/li\u003e\n\u003cli\u003eWeight: 17.2 lbs\u003c\/li\u003e\n\u003cli\u003eMay be added to the Dinan Stage 1 Suspension System\u003c\/li\u003e\n\u003cli\u003eDinan warranty: if the vehicle is still covered by the BMW new-car limited warranty, the part is warranted for the remainder of that coverage, limited to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage from the date of original purchase. Wear items, maintenance parts and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Anti-roll bar (D122-0520)\u003c\/li\u003e\n\u003cli\u003e1x Hardware kit (D133-0520A), containing:\u003c\/li\u003e\n\u003cli\u003e2x Hex nut with flange (33 30 6 760 587)\u003c\/li\u003e\n\u003cli\u003e1x Urethane packet (D131-0001)\u003c\/li\u003e\n\u003cli\u003e2x 1-1\/4\" sway bar bushing (D131-0007)\u003c\/li\u003e\n\u003cli\u003e2x Bushing bracket (D131-0008)\u003c\/li\u003e\n\u003cli\u003e2x End link assembly (D131-0026)\u003c\/li\u003e\n\u003cli\u003e2x M10 Nyloc nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — bushings, brackets, end links and fasteners are all supplied.\u003c\/li\u003e\n\u003cli\u003eCustomer-supplied tools and a vehicle lift or jack stands are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d120-0520.pdf?v=1788302516\" target=\"_blank\"\u003eDinan D120-0520 Adjustable Anti-Roll Bar — installation instructions INS133-0520A (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eApplications taken from Dinan’s installation instructions, which list “2008-13 M3 (E90, E92, \u0026amp; E93)” and “2011 1-M Coupe (E82)”.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD120-0520\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e1 Series M Coupe\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN54 3.0L\u003c\/td\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eS65 4.0L V8\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Coupe\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eS65 4.0L V8\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Convertible\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eS65 4.0L V8\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42776222400678,"sku":"D120-0520","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0520_1.png?v=1652825045"},{"product_id":"dinan-lightweight-tubular-front-anti-roll-bar-2006-2013-bmw-128i-135i-328i-335i","title":"Dinan Lightweight Tubular Front Anti-Roll Bar – BMW 128i \/ 135i \/ 328i \/ 335i (E82\/E90\/E92\/E93)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost all street cars leave the factory with anti-roll bars, but they are tuned soft for maximum comfort. An anti-roll bar reduces body roll, and every Dinan bar is built and tuned for a specific BMW chassis. Keeping the car flatter than stock — while still allowing just enough roll — improves mechanical grip and gives the driver a far more planted, confident feeling in every corner.\u003c\/p\u003e\n\u003cp\u003eThis Lightweight Tubular Adjustable Front Anti-Roll Bar improves grip and stability while saving weight. It is 38% lighter than a solid bar of comparable stiffness and adjusts from 42% to 57% stiffer than the stock 26.5mm bar. The two-hole bar can be mounted in three different positions, and the supplied end links use left- and right-hand threads for easy length adjustment. It may be added to the Dinan Stage 1 Suspension System for owners building a high-performance suspension in phases.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e28mm tubular front anti-roll bar (stock bar is 26.5mm)\u003c\/li\u003e\n\u003cli\u003eAdjustable from \u003cstrong\u003e42% to 57% stiffer than stock\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2-hole bar with 3 possible mounting positions\u003c\/li\u003e\n\u003cli\u003eSupplied end links are left- and right-hand threaded for length adjustment\u003c\/li\u003e\n\u003cli\u003eTubular (hollow) construction — 38% lighter than a solid bar of comparable stiffness\u003c\/li\u003e\n\u003cli\u003eNot compatible with xi \/ xDrive (AWD) vehicles, nor with the 128i \/ 135i convertible\u003c\/li\u003e\n\u003cli\u003eMay be added to the Dinan Stage 1 Suspension System\u003c\/li\u003e\n\u003cli\u003eDinan warranty: if the vehicle is still covered by the BMW new-car limited warranty, the part is warranted for the remainder of that coverage, limited to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage from the date of original purchase. Wear items, maintenance parts and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Anti-roll bar (D122-0530)\u003c\/li\u003e\n\u003cli\u003e1x Hardware kit (D133-0530A), containing:\u003c\/li\u003e\n\u003cli\u003e1x Urethane packet\u003c\/li\u003e\n\u003cli\u003e2x Bushing brackets with fittings\u003c\/li\u003e\n\u003cli\u003e2x Bushings\u003c\/li\u003e\n\u003cli\u003e2x End link assemblies\u003c\/li\u003e\n\u003cli\u003e1x Left and 1x right wiring bracket\u003c\/li\u003e\n\u003cli\u003e2x Tie straps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — bushings, brackets, end links and fasteners are all supplied.\u003c\/li\u003e\n\u003cli\u003eCustomer-supplied tools and a vehicle lift or jack stands are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/a674e2894e3371c97d2ce58f45ca530a98acf254.pdf?v=1788302520\" target=\"_blank\"\u003eDinan D120-0530 Adjustable Anti-Roll Bar — installation instructions INS133-0530A (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eExcludes all xi \/ xDrive (AWD) models and the E88 128i \/ 135i convertible. Dinan lists the 335is application with the N54 engine only.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD120-0530\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e325i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e330i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335is\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN54 3.0L\u003c\/td\u003e\n\u003ctd\u003e2011–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335is\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN54 3.0L\u003c\/td\u003e\n\u003ctd\u003e2011–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e128i\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e135i\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e135is\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42776237244582,"sku":"D120-0530","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0530_1.jpg?v=1652825285"},{"product_id":"dinan-anti-roll-bar-2006-2013-bmw-128i-135i-325i-328i-335i","title":"Dinan Anti-Roll Bar – BMW 128i \/ 135i \/ 325i \/ 328i \/ 335i (E82\/E90\/E92\/E93)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eAlmost all street cars leave the factory with anti-roll bars, but they are tuned soft for maximum comfort and to add understeer. An anti-roll bar reduces body roll, and every Dinan bar is built and tuned for a specific BMW chassis. Keeping the car flatter than stock — while still allowing just enough roll — reduces understeer and improves mechanical grip, giving the driver a far more planted, confident feeling in every corner.\u003c\/p\u003e\n\u003cp\u003eThis 15.8mm rear anti-roll bar is 118% stiffer than the stock 13mm rear bar and may be added to the Dinan Stage 1 Suspension System for owners building a high-performance suspension in stages. Because stock rear bar diameters vary by model, the increase in stiffness varies with the car it is fitted to — see the breakdown in SPECS below.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e15.8mm rear anti-roll bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e118% stiffer\u003c\/strong\u003e than the stock 13mm rear bar\u003c\/li\u003e\n\u003cli\u003eE90 325i \/ 328i \/ 330i \/ 335i: stock 13mm — Dinan 15.8mm is +118% stiffer\u003c\/li\u003e\n\u003cli\u003eE92 328i \/ 335i \/ 335is: stock 13mm — Dinan 15.8mm is +118% stiffer\u003c\/li\u003e\n\u003cli\u003eE93 328i: stock 13mm or 15mm (sport) — Dinan 15.8mm is +118% or +23% stiffer\u003c\/li\u003e\n\u003cli\u003eE93 335is: stock 15mm — Dinan 15.8mm is +23% stiffer\u003c\/li\u003e\n\u003cli\u003eE90 \/ E92 335xi: stock 15mm — Dinan 15.8mm is +23% stiffer\u003c\/li\u003e\n\u003cli\u003eE82 135i: stock 11mm or 12mm — Dinan 15.8mm is +326% or +201% stiffer\u003c\/li\u003e\n\u003cli\u003eE82 128i: stock 12mm — Dinan 15.8mm is +201% stiffer\u003c\/li\u003e\n\u003cli\u003eNot compatible with 328xi vehicles\u003c\/li\u003e\n\u003cli\u003eDinan warranty: if the vehicle is still covered by the BMW new-car limited warranty, the part is warranted for the remainder of that coverage, limited to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage from the date of original purchase. Wear items, maintenance parts and fluids are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Anti-roll bar (D122-0507)\u003c\/li\u003e\n\u003cli\u003e1x Hardware kit (D133-0507)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/dinan-lightweight-tubular-front-anti-roll-bar-2006-2013-bmw-128i-135i-328i-335i\"\u003eDinan Lightweight Tubular Front Anti-Roll Bar (D120-0530)\u003c\/a\u003e — Dinan specifies that the matching 28mm front bar be installed alongside this rear bar for proper balance on rear-wheel-drive cars fitted with a limited-slip differential, or with rear tires 20mm or more wider than the fronts.\u003c\/li\u003e\n\u003cli\u003eCustomer-supplied tools and a vehicle lift or jack stands are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/fc0acd0eb10ad52b22b6b9975f0e896f68759881.pdf?v=1788302520\" target=\"_blank\"\u003eDinan D120-0507 Anti-Roll Bar — installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eDinan excludes 328xi vehicles, and lists the 335is application with the N54 engine only. The 328i applications exclude xDrive.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD120-0507\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e325i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e330i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i \/ 335xi\u003c\/td\u003e\n\u003ctd\u003eE90\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i \/ 335xi\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335is\u003c\/td\u003e\n\u003ctd\u003eE92\u003c\/td\u003e\n\u003ctd\u003eN54 3.0L\u003c\/td\u003e\n\u003ctd\u003e2011–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e328i\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335i\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2007–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e335is\u003c\/td\u003e\n\u003ctd\u003eE93\u003c\/td\u003e\n\u003ctd\u003eN54 3.0L\u003c\/td\u003e\n\u003ctd\u003e2011–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e128i\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN52 3.0L\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e135i\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN54 \/ N55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2008–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e135is\u003c\/td\u003e\n\u003ctd\u003eE82\u003c\/td\u003e\n\u003ctd\u003eN55 3.0L\u003c\/td\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":42776501944486,"sku":"D120-0507","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d120-0507_1.jpg?v=1652828694"},{"product_id":"dinan-coilover-suspension-bmw-m3-m4-g80-g82-g83-d190-8210","title":"Dinan Adjustable Coil-Over Suspension – BMW M3 \/ M4 (G80\/G82\/G83) #D190-8210","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's adjustable coilover system for the G80 M3 and G82\/G83 M4 retains the factory Electronic Damper Control shocks while adding threaded collars for user-adjustable ride height, front and rear. Retuned springs sharpen turn-in without giving up the EDC comfort\/sport switching the car came with.\u003c\/p\u003e\n\u003cp\u003eSpring rates run 15% stiffer up front and 10% softer in the rear versus stock, giving up to 1-1\/8\" of front and 2-1\/4\" of rear lowering (or up to 1\/2\" front and 1-1\/4\" rear of lift) for corner-weighting and stance adjustment. Dinan's recommended drop is 7\/8\" front on M3 (3\/4\" on M4) and 3\/4\" rear.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded-collar coilover system, retains factory Electronic Damper Control (EDC)\u003c\/li\u003e\n\u003cli\u003eSpring rates: 15% stiffer front, 10% softer rear vs. stock\u003c\/li\u003e\n\u003cli\u003eAdjustment range: up to 1-1\/8\" front \/ 2-1\/4\" rear lowering; up to 1\/2\" front \/ 1-1\/4\" rear lift\u003c\/li\u003e\n\u003cli\u003eRecommended drop: 7\/8\" front (M3) or 3\/4\" front (M4); 3\/4\" rear\u003c\/li\u003e\n\u003cli\u003eEstimated labor: check tire clearance during install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear coilover assemblies with threaded adjustment collars\u003c\/li\u003e\n\u003cli\u003eRequired mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eA four-wheel alignment is required after installation\u003c\/strong\u003e (service, sold separately). Verify tire clearance at your target ride height before finalizing fitment.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/17d30403b023e40829064b4fffe93a6ba6fda955.pdf?v=1788302536\"\u003eDinan installation instructions – D190-8210 (G8x M3\/M4 coilovers)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDinan's own product page for D190-8210 lists fitment simply as \"2021-2026 BMW M3\/M4\" with no separate part number or fitment split for xDrive — both RWD and Competition xDrive trims are listed on one row below per model. Coilover geometry can differ meaningfully between RWD and xDrive front subframes, so if you're ordering for an xDrive car, confirm current fitment with Speed Logic or Dinan before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD190-8210\u003c\/strong\u003e — Dinan Adjustable Coil-Over Suspension, BMW M3 \/ M4 (G80\/G82\/G83)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 \/ M3 Competition \/ M3 Competition xDrive\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 \/ M4 Competition \/ M4 Competition xDrive\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":52599577248024,"sku":"D190-8210","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/4a707e506ad2fc11226b4d88fad6fdcb6734758d.jpg?v=1787621442"},{"product_id":"dinan-coilover-suspension-bmw-m2-g87-d190-8220","title":"Dinan Adjustable Coil-Over Suspension – BMW M2 (G87) #D190-8220","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's adjustable coilover system for the G87 M2 pairs performance springs, threaded adjustment collars, progressive bump stops and suspension packers with black anodized aluminum hardware, retaining the factory electronic damping so the car keeps its comfort\/sport modes.\u003c\/p\u003e\n\u003cp\u003eSpring rates run 29% stiffer up front and 13% softer in the rear versus stock, giving up to 1-1\/8\" of front and over 2\" of rear lowering (or up to 1\" front and over 2\" rear of lift). Dinan's recommended drop is 3\/4\" front and rear.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThreaded-collar coilover system, retains factory Electronic Damper Control (EDC)\u003c\/li\u003e\n\u003cli\u003eSpring rates: 29% stiffer front, 13% softer rear vs. stock\u003c\/li\u003e\n\u003cli\u003eAdjustment range: up to 1-1\/8\" front \/ 2\"+ rear lowering; up to 1\" front \/ 2\"+ rear lift\u003c\/li\u003e\n\u003cli\u003eRecommended drop: 3\/4\" front and rear\u003c\/li\u003e\n\u003cli\u003eBlack anodized aluminum components\u003c\/li\u003e\n\u003cli\u003eCovered under Dinan's standard warranty program\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear performance springs\u003c\/li\u003e\n\u003cli\u003eThreaded adjustment collars\u003c\/li\u003e\n\u003cli\u003eProgressive bump stops and suspension packers\u003c\/li\u003e\n\u003cli\u003eRequired mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eA four-wheel alignment is required after installation\u003c\/strong\u003e (service, sold separately). Dinan recommends a professional tire clearance check during install; estimated labor is about 9.2 hours.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/6989ab09ca84101aa36da49807f6bf446d195cab.pdf?v=1788302537\"\u003eDinan installation instructions – D190-8220 (G87 M2 coilovers)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD190-8220\u003c\/strong\u003e — Dinan Adjustable Coil-Over Suspension, BMW M2 (G87)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":52599577477400,"sku":"D190-8220","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/c902fc285c77b4c7aa55032e0da555022ed11cb2.avif?v=1788299196"},{"product_id":"dinan-anti-roll-bar-set-rwd-bmw-g8x-d120-0640","title":"Dinan Anti-Roll Bar Set, RWD – BMW M2 \/ M3 \/ M4 (G8x) #D120-0640","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's tubular anti-roll bar set for RWD G8x M cars is a lighter, stiffer, multi-position adjustable replacement for the factory bars, sharpening turn-in and reducing body roll without the ride harshness of a spring-only setup.\u003c\/p\u003e\n\u003cp\u003eFront bar steps up to 28mm from the OEM 23.5mm, and the rear to 26mm from 21.9mm, for an 18% stiffer front and 35–48% stiffer rear versus stock. The rear bar is 2-hole adjustable to dial in handling balance.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar: 28mm (vs. 23.5mm OEM)\u003c\/li\u003e\n\u003cli\u003eRear bar: 26mm (vs. 21.9mm OEM), 2-hole adjustable\u003c\/li\u003e\n\u003cli\u003eStiffness increase: 18% front, 35–48% rear vs. stock\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength alloy steel, tubular construction, powder coated finish\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings included\u003c\/li\u003e\n\u003cli\u003eRWD-specific — not for xDrive cars (see D120-0645)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear anti-roll bars\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli\u003eMounting hardware and grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part beyond what's included. Subframe dropping is required during install, so professional installation is recommended.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/100eb4b2fc2d085d7381fc5e9d3d60fc7b8d9511.pdf?v=1788302536\"\u003eDinan installation instructions – D120-0640 (RWD anti-roll bar set)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRWD only — confirm your drivetrain before ordering.\u003c\/strong\u003e The xDrive-specific set is a separate part number, \u003ca href=\"\/products\/dinan-anti-roll-bar-set-xdrive-bmw-g8x-d120-0645\"\u003eD120-0645\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD120-0640\u003c\/strong\u003e — Dinan Anti-Roll Bar Set, RWD, BMW M2 \/ M3 \/ M4 (G8x)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":52599577936152,"sku":"D120-0640","price":849.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/558588677aa7cbdaf19950c234006badcce4dd6d.jpg?v=1787621442"},{"product_id":"dinan-anti-roll-bar-set-xdrive-bmw-g8x-d120-0645","title":"Dinan Anti-Roll Bar Set, xDrive – BMW M2 \/ M3 \/ M4 (G8x) #D120-0645","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's tubular anti-roll bar set for xDrive G8x M cars is a lighter, stiffer, multi-position adjustable replacement for the factory bars, tuned around the added front-axle hardware of the all-wheel-drive cars.\u003c\/p\u003e\n\u003cp\u003eFront bar steps up to 26mm from the OEM 22.5mm, and the rear to 26mm from 21.9mm, for a 16% stiffer front and 35–48% stiffer rear versus stock. The rear bar is 2-hole adjustable to dial in handling balance.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront bar: 26mm (vs. 22.5mm OEM)\u003c\/li\u003e\n\u003cli\u003eRear bar: 26mm (vs. 21.9mm OEM), 2-hole adjustable\u003c\/li\u003e\n\u003cli\u003eStiffness increase: 16% front, 35–48% rear vs. stock\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength alloy steel, tubular construction\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings included\u003c\/li\u003e\n\u003cli\u003exDrive-specific — not for RWD cars (see D120-0640)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear anti-roll bars\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings\u003c\/li\u003e\n\u003cli\u003eMounting hardware and grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part beyond what's included. Subframe dropping is required during install (estimated labor about 9.9 hours including alignment), so professional installation is highly recommended.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/ff3795abbebd07d10c4bfc9a1e1b143c2f519053.pdf?v=1788302537\"\u003eDinan installation instructions – D120-0645 (xDrive anti-roll bar set)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003exDrive only — confirm your drivetrain before ordering.\u003c\/strong\u003e The RWD-specific set is a separate part number, \u003ca href=\"\/products\/dinan-anti-roll-bar-set-rwd-bmw-g8x-d120-0640\"\u003eD120-0640\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD120-0645\u003c\/strong\u003e — Dinan Anti-Roll Bar Set, xDrive, BMW M2 \/ M3 \/ M4 (G8x)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 xDrive\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 xDrive\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 xDrive\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":52599578198296,"sku":"D120-0645","price":849.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/ddb0c0f2bb3b3e23973a02deb25a79776087ab3a.avif?v=1788299037"},{"product_id":"dinan-tension-strut-ball-joint-kit-bmw-g8x-d280-0030","title":"Dinan Tension Strut Ball Joint Kit – BMW M2 \/ M3 \/ M4 (G8x) #D280-0030","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's tension strut ball joint kit replaces the compliant factory rubber bushings in the front thrust arms with precision ball joints in machined aluminum housings, removing the flex that softens turn-in response on the G8x M cars. Nylon-lined sealed bearings keep the setup quiet in daily driving.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision ball joints in machined aluminum housings, replacing OEM rubber thrust-arm bushings\u003c\/li\u003e\n\u003cli\u003eNylon-lined, sealed bearings for quiet operation\u003c\/li\u003e\n\u003cli\u003eFront suspension — compatible with both RWD and xDrive\u003c\/li\u003e\n\u003cli\u003eEstimated labor: about 4 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePair of tension strut ball joints with machined aluminum housings\u003c\/li\u003e\n\u003cli\u003eRequired mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eA four-wheel alignment is required after installation\u003c\/strong\u003e (service, sold separately).\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/965d0845e3c6a6253c50790986f49403e1c34316.pdf?v=1788302537\"\u003eDinan installation instructions – D280-0030 (tension strut ball joint kit)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eD280-0030\u003c\/strong\u003e — Dinan Tension Strut Ball Joint Kit, BMW M2 \/ M3 \/ M4 (G8x)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 \/ M3 xDrive\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 \/ M4 xDrive\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":52599578362136,"sku":"D280-0030","price":415.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/14b5bb7cfaed6045f621dbf4377d6c1fcd1ce402.jpg?v=1787621442"},{"product_id":"dinan-carbon-fiber-strut-tower-brace-bmw-g8x-s58-d180-0015","title":"Dinan Carbon Fiber Strut Tower Brace – BMW M2 \/ M3 \/ M4 (G8x, S58) #D180-0015","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's carbon fiber strut tower brace replaces the OEM two-piece steel brace with a single unified structure in 2x2 twill carbon fiber and aluminum mounting points, tying the front strut towers together for a stiffer, more direct front end while cutting real weight up high in the chassis.\u003c\/p\u003e\n\u003cp\u003eAt 2.8 lb versus the factory steel brace's 8.4 lb, it's a 5.6 lb reduction right over the front axle. It bolts on using the factory mounting hardware and is compatible with either the factory intake or a Dinan intake.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 twill carbon fiber construction with aluminum mounting points\u003c\/li\u003e\n\u003cli\u003e2.8 lb vs. 8.4 lb OEM steel brace (5.6 lb lighter)\u003c\/li\u003e\n\u003cli\u003eConverts the OEM 2-piece brace design into one unified structural piece\u003c\/li\u003e\n\u003cli\u003eAvailable in gloss or matte finish (this listing covers both — select your variant)\u003c\/li\u003e\n\u003cli\u003eCompatible with factory or Dinan intake systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber strut tower brace\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using factory mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part — it bolts on using the factory mounting hardware.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/192942469745a70c70396bbbd1d5cd7b5dabed1b.pdf?v=1788302537\"\u003eDinan installation instructions – D180-0015 (strut tower brace, gloss and matte)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eGloss and matte are separate part numbers — confirm your finish before ordering.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD180-0015\u003c\/strong\u003e — Gloss Carbon Fiber Strut Tower Brace, BMW G8x S58\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD180-0015-B\u003c\/strong\u003e — Matte Carbon Fiber Strut Tower Brace, BMW G8x S58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003ctd\u003eG87\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2023+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eG80\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eG82 \/ G83\u003c\/td\u003e\n\u003ctd\u003eS58 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2021+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Gloss Carbon Fiber","offer_id":52599582851352,"sku":"D180-0015","price":1171.95,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon Fiber","offer_id":52599582884120,"sku":"D180-0015-B","price":1171.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/7f2b3788e2a69a81e555ba758a459a863b8f6eab.jpg?v=1787621446"}],"url":"https:\/\/speedlogicauto.com\/collections\/dinan-suspension.oembed?page=2","provider":"SPEED LOGIC","version":"1.0","type":"link"}