{"title":"S55 Intakes \u0026 Air Filters","description":null,"products":[{"product_id":"dinan-cold-air-intake-2015-2020-bmw-m2-m3-m4","title":"Dinan Cold Air Intake – BMW M2 \/ M3 \/ M4 (F8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eDinan's carbon fiber cold air intake for the F8x M2 Competition, M3 and M4 replaces the factory intake with a sealed, free-flowing system designed to deliver as much cold outside air to the S55 as possible. An optimized carbon fiber tube gives the charge a straighter, less restrictive path into the engine, while dual airboxes roughly 20% larger than stock house cylindrical filters 30% larger than stock and feed through a larger MAF housing — insulating the intake charge from underhood heat while increasing flow.\u003c\/p\u003e\n\u003cp\u003eThe result is a slightly more audible, sportier induction tone and, according to Dinan, increased horsepower and torque throughout the power band. Installation is bolt-on using the factory mounting locations, and the exposed carbon tube makes the intake as much of a visual upgrade under the hood as a performance one.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower gain: +14 HP @ 6000 RPM and +21 lb-ft @ 3000 RPM (coupled with engine tuning)\u003c\/li\u003e\n\u003cli\u003eAirbox volume approximately 20% larger than stock, fully sealed against underhood heat\u003c\/li\u003e\n\u003cli\u003eCylindrical air filters 30% larger than stock for optimum flow\u003c\/li\u003e\n\u003cli\u003eOptimized carbon fiber intake tube\u003c\/li\u003e\n\u003cli\u003eLarger MAF housing\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and a sportier induction sound\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eEmissions status per Dinan: legal under the provisions of the EPA Tampering Policy dated November 23, 2020; NOT legal for sale or use in the State of California\u003c\/li\u003e\n\u003cli\u003eDinan limited warranty: if the vehicle is still covered by the BMW new-car warranty, the part carries the remainder of that warranty up to 4 years \/ 50,000 miles; otherwise 2 years, unlimited mileage. Wear items are excluded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) MAF housing — D762-0204\u003c\/li\u003e\n\u003cli\u003e(1) Airbox lid, left — D762-0205\u003c\/li\u003e\n\u003cli\u003e(1) Airbox lid, right — D762-0206\u003c\/li\u003e\n\u003cli\u003e(1) Carbon fiber tube — D762-0207\u003c\/li\u003e\n\u003cli\u003e(1) Air filter — D401-0022\u003c\/li\u003e\n\u003cli\u003e(1) Silicone hose — D762-0208\u003c\/li\u003e\n\u003cli\u003e(1) Hardware kit — D763-0156 (9mm clamps, M4 button head screws, 7\/8\" loop clamp, vinyl cap, lid spacers, gaskets)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Dinan specifies no additional hardware for this part.\u003c\/li\u003e\n\u003cli\u003eOptional: Dinan states this intake shows consistent gains over Stage 1 when combined with a Stage 2 DINANTRONICS Performance Tuner (sold separately, where applicable).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/d760-0045.pdf?v=1788302499\"\u003eDinan D760-0045 Cold Air Intake — Installation Instructions (INS760-0045, Rev. 01\/08\/19) (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis part is legal for sale or use on Racing Use Only Vehicles. Racing Use Only Vehicles are vehicles that are used exclusively for competition, that are not registered, and that may never be used on the street.\u003c\/li\u003e\n\u003cli\u003eYears shown are taken from Dinan's official application list in the installation instructions for this part number. Dinan's current catalog page lists the same intake for 2015–2021 M2 Competition \/ M3 \/ M4 — please confirm fitment with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eD760-0045\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3 Sedan\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Coupe\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":37679879192742,"sku":"D760-0045","price":1699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d760-0045_1.jpg?v=1611954275"},{"product_id":"injen-evolution-intake-evo1102-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Evolution Intake – BMW M3 \/ M4 (F80 \/ F82)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe EVO1102 is Injen's Evolution sealed cold air intake system for the S55-powered BMW M3 and M4. It was designed with current engineering tools and techniques and uses a pair of one-piece sealed roto-molded housings, each with the patent-pending Injen Twist-Lock system holding a SuperNano-Web dry air filter securely in place. A sight window in each housing makes filter inspection easy and gives the engine bay a distinctive look.\u003c\/p\u003e\n\u003cp\u003eThe two roto-molded intake tubes are custom designed and dyno-tuned for power while retaining a clean, quality fit. Stainless steel band clamps with an inner protective liner and reinforced automotive-grade silicone couplers provide a secure installation, and the Twist-Lock system reduces the hardware count so the kit goes on quickly. The system was created and designed entirely in 3D and fits to a standard equal to or above the OE system.\u003c\/p\u003e\n\u003cp\u003eAfter design work and dyno testing, Injen rates this Evolution intake at 22 additional horsepower and 27 lb-ft of torque, running on the stock calibration. It carries the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEvolution series dual sealed cold air intake\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 22 hp and 27 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock calibration; no tune required\u003c\/li\u003e\n\u003cli\u003eRetains the OEM mass air flow sensors\u003c\/li\u003e\n\u003cli\u003eDurable roto-molded polyethylene tubes and one-piece sealed housings\u003c\/li\u003e\n\u003cli\u003ePatent-pending Twist-Lock filter attachment system\u003c\/li\u003e\n\u003cli\u003eTwo fully serviceable Injen SuperNano-Web dry air filters\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1097-BB\u003c\/li\u003e\n\u003cli\u003eReinforced automotive-grade silicone couplers\u003c\/li\u003e\n\u003cli\u003eStainless steel band clamps with inner protective liner\u003c\/li\u003e\n\u003cli\u003eClearVue inspection badge for checking filter condition\u003c\/li\u003e\n\u003cli\u003eAggressive intake growl under acceleration\u003c\/li\u003e\n\u003cli\u003eShipping weight 30.0 lb; package 17\" W x 13\" H x 28\" L\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x right side airbox (X-15113)\u003c\/li\u003e\n\u003cli\u003e1 x right side intake tube (X-15114)\u003c\/li\u003e\n\u003cli\u003e1 x left side airbox (X-15115)\u003c\/li\u003e\n\u003cli\u003e1 x left side intake tube (X-15116)\u003c\/li\u003e\n\u003cli\u003e2 x Twist-Lock dry air filters, no fitting (X-1097)\u003c\/li\u003e\n\u003cli\u003e1 x 3.00\" x 1.0\" straight hose (X-3187)\u003c\/li\u003e\n\u003cli\u003e2 x #48 clamps (X-4004)\u003c\/li\u003e\n\u003cli\u003e1 x machined fitting (X-14066)\u003c\/li\u003e\n\u003cli\u003e2 x small windows (X-15139)\u003c\/li\u003e\n\u003cli\u003e4 x push nuts (X-6109)\u003c\/li\u003e\n\u003cli\u003e4 x M4 Allen screws (X-6072)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Injen specifies no additional hardware for this part, and no tune is required.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied: metric socket and wrench set, flat-blade screwdriver, Allen key set, and a torque wrench.\u003c\/li\u003e\n\u003cli\u003eOptional service items: replacement SuperNano-Web dry filters X-1097-BB and an Injen dry filter cleaning kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-evo1102-installation-instructions.pdf?v=1787176906\"\u003eInjen EVO1102 installation instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNote: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Injen also restricts shipment of this part to CA, CO, CT, DE, ME, MD, MA, MN, NY, NJ, OR, PA, RI, VT and WA.\u003c\/li\u003e\n\u003cli\u003eThe previous listing showed the M2 Competition as 2019–2020. Injen's official application list runs through 2021, which is used above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVO1102\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82 \/ F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180223434918,"sku":"EVO1102","price":875.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/dd684de3f93dfc3e3025f3fd799791f6.jpg?v=1643752028"},{"product_id":"injen-short-ram-intake-polished-sp1116p-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Short Ram Intake SP1116P – BMW M3 \/ M4 (F80 \/ F82)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe SP series is Injen Technology's flagship traditional aluminum intake line. Injen produced the world's first tuned air intake system and holds four patents covering the intake tuning process, including MegaRam (MR) Technology (patents 7,359,795 and 7,669,571) and Air Fusion (patent 7,721,669). The SP1116 is a two-piece short ram system built with MR Technology for the S55 twin-turbo six.\u003c\/p\u003e\n\u003cp\u003eEach 6061-T6 aluminum intake tube feeds one turbo through a smooth, uninterrupted path in place of the restrictive factory airbox. Because the S55 runs a pair of turbochargers, the kit ships with two application-specific heat shields — driver and passenger side — to isolate both filters from radiant underhood heat. Injen developed the system on the dyno for gains of up to 20 horsepower and 23 lb-ft of torque, the largest figures in the SP BMW range, while holding a safe air\/fuel ratio across the power band, so no additional tuning is required.\u003c\/p\u003e\n\u003cp\u003eAir is drawn through a pair of fully serviceable Injen SuperNano-Web dry filters, which add filtration surface area for greater airflow without an oiled media. The polished aluminum tubes are a clean showpiece under the hood, and the system delivers an aggressive, throaty tone under full throttle. Made in Pomona, California and backed by the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Injen SP short ram air intake system, two-piece\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 20 hp and 23 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eIntake tubes: 6061-T6 aluminum, polished finish\u003c\/li\u003e\n\u003cli\u003eAlso offered by Injen in wrinkle black and wrinkle red finishes\u003c\/li\u003e\n\u003cli\u003eBuilt with Injen MR Technology\u003c\/li\u003e\n\u003cli\u003eFilters: two Injen SuperNano-Web dry air filters, 3\" inlet, fully serviceable\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1081-BB\u003c\/li\u003e\n\u003cli\u003eIncludes dual application-specific heat shields (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMaintains factory air\/fuel ratios; no additional tuning required\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt — not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Two-piece short ram intake system with MR Technology\u003c\/li\u003e\n\u003cli\u003e1 x Driver-side heat shield (#11125)\u003c\/li\u003e\n\u003cli\u003e1 x Passenger-side heat shield (#11124)\u003c\/li\u003e\n\u003cli\u003e2 x Injen badge (#11097)\u003c\/li\u003e\n\u003cli\u003e2 x 3\" Injen dry filter (#1081)\u003c\/li\u003e\n\u003cli\u003e1 x 3\" straight hose (#3187)\u003c\/li\u003e\n\u003cli\u003e2 x #048 Power Band clamps (#4004)\u003c\/li\u003e\n\u003cli\u003e2 x M6 stand-off studs (#15023)\u003c\/li\u003e\n\u003cli\u003e2 x M6 Vibra-mount (#6020)\u003c\/li\u003e\n\u003cli\u003e1 x Nylon spacer (#8042)\u003c\/li\u003e\n\u003cli\u003e1 x Grommet (#8026)\u003c\/li\u003e\n\u003cli\u003e4 x M4 button screws (#6072)\u003c\/li\u003e\n\u003cli\u003e7 x M6 flange nuts (#6002)\u003c\/li\u003e\n\u003cli\u003e8 x Fender washers (#6010)\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 16 hex screws (#6005)\u003c\/li\u003e\n\u003cli\u003e1 x M6 x 25 hex screw (#6006)\u003c\/li\u003e\n\u003cli\u003e2 x Rubber trim, 13.5\" length (#6058)\u003c\/li\u003e\n\u003cli\u003e2 x Vinyl trim, 13.5\" length (#6023)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 18\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 15.5\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x 4-page instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Injen specifies no additional hardware, tuning or fluids for this intake — all required mounting hardware is supplied in the kit.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: metric socket and wrench set, flat and Phillips screwdrivers, a trim panel tool and a torque wrench.\u003c\/li\u003e\n\u003cli\u003eOptional service items: Injen replacement dry air filter X-1081-BB (two required for a full set) and an Injen dry-filter cleaning kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\" target=\"_blank\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003cli\u003esl-note: Fitment above follows Injen's current official application list, which differs from the product title. Injen lists the M3 as F80 through 2018, the M4 as F82\/F83 through 2020, and adds the 2019–2021 F87 M2 Competition. Confirm your chassis code and year with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSP1116P\u003c\/strong\u003e — polished finish (this listing)\u003c\/li\u003e\n\u003cli\u003eSP1116WB — wrinkle black finish\u003c\/li\u003e\n\u003cli\u003eSP1116WR — wrinkle red finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82 \/ F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180383506598,"sku":"SP1116P","price":933.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/d8b07a61876fa384734be506094484a8.jpg?v=1643754418"},{"product_id":"injen-short-ram-intake-wrinkle-black-sp1116wb-2015-2020-bmw-m3-m4-f80-f82","title":"Injen Short Ram Intake Wrinkle Black SP1116WB – BMW M3 \/ M4 (F80 \/ F82)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe SP series is Injen Technology's flagship traditional aluminum intake line. Injen produced the world's first tuned air intake system and holds four patents covering the intake tuning process, including MegaRam (MR) Technology (patents 7,359,795 and 7,669,571) and Air Fusion (patent 7,721,669). The SP1116 is a two-piece short ram system built with MR Technology for the S55 twin-turbo six.\u003c\/p\u003e\n\u003cp\u003eEach 6061-T6 aluminum intake tube feeds one turbo through a smooth, uninterrupted path in place of the restrictive factory airbox. Because the S55 runs a pair of turbochargers, the kit ships with two application-specific heat shields — driver and passenger side — to isolate both filters from radiant underhood heat. Injen developed the system on the dyno for gains of up to 20 horsepower and 23 lb-ft of torque, the largest figures in the SP BMW range, while holding a safe air\/fuel ratio across the power band, so no additional tuning is required.\u003c\/p\u003e\n\u003cp\u003eAir is drawn through a pair of fully serviceable Injen SuperNano-Web dry filters, which add filtration surface area for greater airflow without an oiled media. The textured wrinkle black finish gives a stealth look under the hood, and the system delivers an aggressive, throaty tone under full throttle. Made in Pomona, California and backed by the Injen Technology Limited Lifetime Warranty.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Injen SP short ram air intake system, two-piece\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 20 hp and 23 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eIntake tubes: 6061-T6 aluminum, wrinkle black finish\u003c\/li\u003e\n\u003cli\u003eAlso offered by Injen in polished and wrinkle red finishes\u003c\/li\u003e\n\u003cli\u003eBuilt with Injen MR Technology\u003c\/li\u003e\n\u003cli\u003eFilters: two Injen SuperNano-Web dry air filters, 3\" inlet, fully serviceable\u003c\/li\u003e\n\u003cli\u003eReplacement air filter part number X-1081-BB\u003c\/li\u003e\n\u003cli\u003eIncludes dual application-specific heat shields (driver and passenger side)\u003c\/li\u003e\n\u003cli\u003eMaintains factory air\/fuel ratios; no additional tuning required\u003c\/li\u003e\n\u003cli\u003eNot CARB exempt — not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003cli\u003eMade in Pomona, California, USA\u003c\/li\u003e\n\u003cli\u003eInjen Technology Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Two-piece short ram intake system with MR Technology\u003c\/li\u003e\n\u003cli\u003e1 x Driver-side heat shield (#11125)\u003c\/li\u003e\n\u003cli\u003e1 x Passenger-side heat shield (#11124)\u003c\/li\u003e\n\u003cli\u003e2 x Injen badge (#11097)\u003c\/li\u003e\n\u003cli\u003e2 x 3\" Injen dry filter (#1081)\u003c\/li\u003e\n\u003cli\u003e1 x 3\" straight hose (#3187)\u003c\/li\u003e\n\u003cli\u003e2 x #048 Power Band clamps (#4004)\u003c\/li\u003e\n\u003cli\u003e2 x M6 stand-off studs (#15023)\u003c\/li\u003e\n\u003cli\u003e2 x M6 Vibra-mount (#6020)\u003c\/li\u003e\n\u003cli\u003e1 x Nylon spacer (#8042)\u003c\/li\u003e\n\u003cli\u003e1 x Grommet (#8026)\u003c\/li\u003e\n\u003cli\u003e4 x M4 button screws (#6072)\u003c\/li\u003e\n\u003cli\u003e7 x M6 flange nuts (#6002)\u003c\/li\u003e\n\u003cli\u003e8 x Fender washers (#6010)\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 16 hex screws (#6005)\u003c\/li\u003e\n\u003cli\u003e1 x M6 x 25 hex screw (#6006)\u003c\/li\u003e\n\u003cli\u003e2 x Rubber trim, 13.5\" length (#6058)\u003c\/li\u003e\n\u003cli\u003e2 x Vinyl trim, 13.5\" length (#6023)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 18\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x Bulb edge trim, 15.5\" length (#6094)\u003c\/li\u003e\n\u003cli\u003e1 x 4-page instruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Injen specifies no additional hardware, tuning or fluids for this intake — all required mounting hardware is supplied in the kit.\u003c\/li\u003e\n\u003cli\u003eInstaller-supplied tools: metric socket and wrench set, flat and Phillips screwdrivers, a trim panel tool and a torque wrench.\u003c\/li\u003e\n\u003cli\u003eOptional service items: Injen replacement dry air filter X-1081-BB (two required for a full set) and an Injen dry-filter cleaning kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/injen-sp1116-installation-instructions.pdf?v=1787176832\" target=\"_blank\"\u003eInjen SP1116 Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003cli\u003esl-note: Fitment above follows Injen's current official application list, which differs from the product title. Injen lists the M3 as F80 through 2018, the M4 as F82\/F83 through 2020, and adds the 2019–2021 F87 M2 Competition. Confirm your chassis code and year with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSP1116WB\u003c\/strong\u003e — wrinkle black finish (this listing)\u003c\/li\u003e\n\u003cli\u003eSP1116P — polished finish\u003c\/li\u003e\n\u003cli\u003eSP1116WR — wrinkle red finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82 \/ F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Injen","offers":[{"title":"Default Title","offer_id":42180467589286,"sku":"SP1116WB","price":933.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/08f4fdc4-6804-408f-96b3-e8c3897038ea-420.jpg?v=1643756422"},{"product_id":"eventuri-black-carbon-intake-for-2019-bmw-f87-m2-comp-eve-m2c-cf-int","title":"Eventuri Black Carbon Intake – BMW M2 Competition (F87)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe F87 M2 Competition intake system is designed to let the turbos work more efficiently. Replacing the stock airbox with Eventuri's patented Venturi filter housings and smoothly curved carbon tubes makes the airflow to the turbos more laminar, so they spool with less drag.\u003c\/p\u003e\n\u003cp\u003eBecause the M2 Competition has no air openings behind the grilles, Eventuri added sealed carbon ducts to keep intake temperatures as low as possible. The combination of Venturi housings, organically shaped tubes and sealed ducts produces an optimized intake that sets a benchmark for the platform.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDyno-verified gain of 12–20 hp and 12–16 lb-ft, as published by Eventuri\u003c\/li\u003e\n\u003cli\u003e2 x patented Venturi-profile carbon fiber filter housings\u003c\/li\u003e\n\u003cli\u003e100% prepreg carbon fiber construction throughout — housings, tubes and ducts\u003c\/li\u003e\n\u003cli\u003eGloss black carbon finish\u003c\/li\u003e\n\u003cli\u003e2 x bespoke High Flow Generation 2 dry filters, reverse mounted so the filter does not dictate airflow shape\u003c\/li\u003e\n\u003cli\u003eRetains both factory MAF sensors — each carbon tube has an integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eSealed carbon fiber intake ducts to keep intake air temperatures down in the absence of factory grille openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x patented carbon fiber Venturi housings\u003c\/li\u003e\n\u003cli\u003e2 x bespoke High Flow Generation 2 filters\u003c\/li\u003e\n\u003cli\u003e2 x aluminum cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003eLeft side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eRight side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003e2 x carbon fiber intake ducts\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel brackets\u003c\/li\u003e\n\u003cli\u003eHigh quality silicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Eventuri specifies no additional hardware for this part — it is a complete bolt-on kit and no tune is required.\u003c\/li\u003e\n\u003cli\u003eInstaller supplies basic hand tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/eventuri-EVE-M2C-CF-INT-installation-instructions.pdf?v=1787176292\"\u003eEventuri BMW F87 M2 Competition Intake — Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e ** This item is not eligible for return ** Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVE-M2C-CF-INT\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2019–2021\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":43023147270310,"sku":"EVE-M2C-CF-INT","price":2245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/de31fbee6077ee4e9d64a84a23dd2d8c_750x_570c6a69-922e-4e4a-9fa1-a9d4fb2d4887.webp?v=1656628513"},{"product_id":"eventuri-carbon-intake-v2-for-2015-2019-bmw-f8x-m3-m4-eve-f8xmv2-cf-int","title":"Eventuri Carbon Intake V2 – BMW M3 \/ M4 (F8x)","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe F8X M3 \/ M4 intake system is one of Eventuri's most ambitious designs. In its updated V2 form it features sealed filter housings that maintain a more steady IAT even while the car is stationary. New ducts seal the housings and, combined with the carbon front scoops, ensure unrestricted airflow while keeping inlet temperatures down through cold air saturation.\u003c\/p\u003e\n\u003cp\u003eEvery detail was considered to create a flagship intake for the platform. From the scoops to the ducts to the intake tubes, Eventuri developed a complete solution that gives a smooth inlet track with cold air saturation. The carbon weave is matched to OEM M Performance carbon, so the system looks factory-correct alongside the rest of the engine bay.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower gain: 15–20 hp (Eventuri)\u003c\/li\u003e\n\u003cli\u003eTorque gain: 18–23 lb-ft (Eventuri)\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri carbon fiber Venturi housings, sealed in the V2 design for steadier IATs\u003c\/li\u003e\n\u003cli\u003e100% prepreg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eCarbon weave matched to OEM M Performance carbon\u003c\/li\u003e\n\u003cli\u003eTwo high flow Gen 2 filters\u003c\/li\u003e\n\u003cli\u003eLeft and right carbon tubes with integrated MAF sensor mounts — the OEM mass airflow sensors are retained\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber sealed intake ducts\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber front scoops for cold air saturation\u003c\/li\u003e\n\u003cli\u003eTwo aluminum cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel brackets\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003cli\u003eNo CARB EO number — not offered for sale in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Carbon fiber Venturi housings\u003c\/li\u003e\n\u003cli\u003e2 x High flow Gen 2 filters\u003c\/li\u003e\n\u003cli\u003eRight side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eLeft side carbon tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber sealed intake ducts\u003c\/li\u003e\n\u003cli\u003e2 x Carbon fiber front scoops\u003c\/li\u003e\n\u003cli\u003e2 x Aluminum cowls\u003c\/li\u003e\n\u003cli\u003eLaser cut stainless steel brackets\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e Eventuri specifies no additional hardware for this part.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/eventuri-EVE-F8XMV2-CF-INT-installation-instructions.pdf?v=1787176318\"\u003eEventuri BMW F8X M3 \/ M4 Intake System – Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e ** This item is not eligible for return ** Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California.\u003c\/li\u003e\n\u003cli\u003eModel year ranges follow the fitment data recorded for this listing; the product title quotes 2015–2019. Confirm fitment for your build with Speed Logic before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEVE-F8XMV2-CF-INT\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4 Convertible\u003c\/td\u003e\n\u003ctd\u003eF83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Twin-Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2015–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":43023458926758,"sku":"EVE-F8XMV2-CF-INT","price":2695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/products\/1_6a9d2515-f2fd-464a-8b2a-2958afa61565.webp?v=1656634211"},{"product_id":"ams-performance-bmw-f8x-m3-m4-s55-carbon-fiber-intakes","title":"AMS Performance BMW F8X M3\/M4 S55 Carbon Fiber Intakes","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe AMS Performance Carbon Fiber Intake system for the BMW F8X M3\/M4 replaces the factory airbox with a carbon fiber housing designed to improve airflow and induction sound on the S55 3.0L twin-turbo platform.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber intake housing with high-flow filter(s)\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the factory airbox\u003c\/li\u003e\n\u003cli\u003eManufactured by AMS Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eParts Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(1) AMS Performance Carbon Fiber Intake System\u003c\/li\u003e\n\u003cli\u003eRequired hardware for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTech Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Extras:\u003c\/strong\u003e No additional hardware or accessories are required beyond what is included with this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/AMS-Performance-BMW-S55-Intake-Install-Instructions-v2.pdf?v=1788463785\" target=\"_blank\" rel=\"noopener\"\u003eAMS Performance BMW S55 Intake Install Instructions (PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"sl-note\"\u003ePart Number: AMS.39.08.0001-1\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Turbo\u003c\/td\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\/F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Turbo\u003c\/td\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"AMS Performance","offers":[{"title":"Default Title","offer_id":52610084307224,"sku":"AMS.39.08.0001-1","price":1999.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/AMS-Performance-F8X-S55-Carbon-Fiber-Intakes-1.jpg?v=1788464091"},{"product_id":"bmc-twin-air-filter-kit-bmw-s55-m3-m4-m2-competition","title":"BMC Twin Air Filter Kit - BMW S55 M3\/M4\/M2 Competition","description":"\u003cstyle\u003e.sl-desc h2{font-size:1.15em;letter-spacing:.06em;text-transform:uppercase;border-bottom:2px solid #111;padding-bottom:6px;margin:1.6em 0 .7em}.sl-desc h3{font-size:1em;margin:1.2em 0 .4em}.sl-desc ul{margin:0 0 1em 1.2em}.sl-desc li{margin:.25em 0}.va-table{width:100%;border-collapse:collapse;margin:.5em 0 1em;font-size:.95em}.va-table th{text-align:left;padding:10px 8px;border-bottom:2px solid #333;white-space:nowrap}.va-table td{padding:8px;border-bottom:1px solid #e5e5e5;vertical-align:top}.sl-note{font-size:.9em;color:#555;margin:.4em 0 1em}\u003c\/style\u003e\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe BMC Twin Air Filter Kit is a direct-fit replacement for the factory paper filters on S55-powered BMW M3\/M4\/M2 Competition models. Constructed from oiled cotton gauze, it's washable and regenerable for the life of the vehicle, offering improved airflow over the stock paper element.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOiled cotton gauze media, approx. 7-micron filtration\u003c\/li\u003e\n\u003cli\u003eWashable and reusable (not a disposable filter)\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement in the factory airbox — no tuning required\u003c\/li\u003e\n\u003cli\u003eFilter dimensions: 214 x 235mm per filter\u003c\/li\u003e\n\u003cli\u003eKit weight: 0.9kg (two filters)\u003c\/li\u003e\n\u003cli\u003e2-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eParts Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e(2) BMC Performance Air Filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTech Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired Extras:\u003c\/strong\u003e No additional hardware or accessories are required — this filter kit installs in place of the factory filters using the factory airbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Drop-in replacement for the factory paper filters; no BMC-specific install PDF is published for this kit. See BMC's general filter care\/regeneration guide: \u003ca href=\"https:\/\/www.bmcairfilters.com\/en\/how-to-regenerate-a-bmc-air-filter\" target=\"_blank\" rel=\"noopener\"\u003eHow to Regenerate a BMC Air Filter\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"sl-note\"\u003ePart Number: FB647\/20\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003eF80\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Turbo\u003c\/td\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003eF82\/F83\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Turbo\u003c\/td\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM2 Competition\u003c\/td\u003e\n\u003ctd\u003eF87\u003c\/td\u003e\n\u003ctd\u003eS55 3.0L Turbo\u003c\/td\u003e\n\u003ctd\u003e2019-2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"BMC","offers":[{"title":"Default Title","offer_id":52610137162008,"sku":"FB647\/20","price":207.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/5343798d9c26dc83ba2751677e602b9a.jpg?v=1788465610"}],"url":"https:\/\/speedlogicauto.com\/collections\/s55-intakes-air-filters.oembed","provider":"SPEED LOGIC","version":"1.0","type":"link"}