{"product_id":"do88-intake-system-bmw-m240i-340i-440i-f22-f30-f32-b58-gen-1","title":"do88 Intake System – BMW M240i \/ 340i \/ 440i (F22 \/ F30 \/ F32, B58 Gen 1)","description":"\u003cdiv class=\"sl-desc\"\u003e\n\u003ch2\u003eOVERVIEW\u003c\/h2\u003e\n\u003cp\u003eThe do88 LF-260 replaces the plastic airbox and intake pipe on the B58 Gen 1 M240i, 340i and 440i with a fully sealed heat-shielded filter enclosure and an aluminum intake pipe. The enclosure uses a lid and sealing strips so the filter only breathes through the factory fresh-air duct, which keeps intake air temperatures low.\u003c\/p\u003e\n\u003cp\u003eThe pipe is 85 mm at the MAF sensor and expands to 93 mm toward the turbo inlet elbow. do88 deliberately kept the MAF section at 85 mm so the factory air-mass readings stay accurate — they note that 89 mm pipes from some other kits can read wrong, run lean and set a check engine light. do88 rates it at up to 39 percent more airflow than stock and measured a 0.4-second quicker 100–200 km\/h run on a Stage 2 car. With the factory silencer gone you'll hear more of the turbo and diverter valve.\u003c\/p\u003e\n\u003ch2\u003eSPECS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully sealed heat shield with lid and sealing strips; reuses the OE fresh-air inlet duct\u003c\/li\u003e\n\u003cli\u003eAluminum intake pipe: 85 mm at the MAF sensor, expanding to 93 mm\u003c\/li\u003e\n\u003cli\u003edo88 85 mm (3.3\") cotton-gauze filter, washable and reusable (ships dry)\u003c\/li\u003e\n\u003cli\u003eAirflow: up to 39 percent over stock (do88 testing)\u003c\/li\u003e\n\u003cli\u003e0.4 s quicker 100–200 km\/h on a Stage 2 car (do88 testing)\u003c\/li\u003e\n\u003cli\u003eRemoves the factory intake silencer\u003c\/li\u003e\n\u003cli\u003eReplaces OE 13718601678, 13718605164, 13718601682\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePARTS INCLUDED\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003edo88 heat shield and heat shield lid\u003c\/li\u003e\n\u003cli\u003edo88 intake pipe and silicone coupler\u003c\/li\u003e\n\u003cli\u003edo88 air filter\u003c\/li\u003e\n\u003cli\u003e2 × rubber sealing strips and 1 × foam strip\u003c\/li\u003e\n\u003cli\u003e3 × hose clamps, 5 × screws, bolt, nut and washer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECH RESOURCES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired extras:\u003c\/strong\u003e none. The filter ships dry — apply cotton filter oil if you drive in dusty conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation instructions (do88):\u003c\/strong\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/do88-LF-260-installation-instructions.pdf\"\u003eLF-260 B58 Gen 1 intake installation instructions (PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation notes:\u003c\/strong\u003e disconnect the air mass meter, loosen the hose clamp, remove the screws and snap lock, and lift out the OE airbox and hose. Move the air mass meter to the do88 pipe (it may need drilling to accept the supplied screws), fit the pipe with the silicone coupler, mount the heat shield, fit the sealing strip to the lid and clamp on the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter care:\u003c\/strong\u003e clean about every 10,000 km (6,000 miles) with a cotton-gauze filter cleaner; oil evenly and sparingly. Replacement element: do88 LF-260-FILTER.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning:\u003c\/strong\u003e no tune is required. Pairs with the \u003ca href=\"https:\/\/speedlogicauto.com\/products\/bootmod3-b58-bmw-fxx-gxx-m140i-m240i-340i-440i-540i-640i-740i-840i-z4m40i-m340i-x3-m40i-tune\"\u003eBootmod3 B58 Tune – BMW\u003c\/a\u003e and \u003ca href=\"https:\/\/speedlogicauto.com\/products\/mhd-super-license-for-b58\"\u003eMHD Super License – BMW B58\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNo CARB EO is published for this part — off-road \/ competition use only in California.\u003c\/li\u003e\n\u003cli\u003ePrice is for the item only; labor is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePART NUMBER\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLF-260\u003c\/strong\u003e — do88 Intake System, BMW M140i M240i 340i 440i F3X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE APPLICATIONS\u003c\/h2\u003e\n\u003ctable class=\"va-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eChassis\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM140i\u003c\/td\u003e\n\u003ctd\u003eF20 \/ F21\u003c\/td\u003e\n\u003ctd\u003eB58 Gen 1 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003eM240i\u003c\/td\u003e\n\u003ctd\u003eF22 \/ F23\u003c\/td\u003e\n\u003ctd\u003eB58 Gen 1 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2017–2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e340i\u003c\/td\u003e\n\u003ctd\u003eF30 \/ F31 \/ F34\u003c\/td\u003e\n\u003ctd\u003eB58 Gen 1 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2016–2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBMW\u003c\/td\u003e\n\u003ctd\u003e440i\u003c\/td\u003e\n\u003ctd\u003eF32 \/ F33 \/ F36\u003c\/td\u003e\n\u003ctd\u003eB58 Gen 1 3.0L Turbo I6\u003c\/td\u003e\n\u003ctd\u003e2017–2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":53249012498712,"sku":"LF-260","price":426.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2307\/8117\/files\/LF-260_1.jpg?v=1794358656","url":"https:\/\/speedlogicauto.com\/products\/do88-intake-system-bmw-m240i-340i-440i-f22-f30-f32-b58-gen-1","provider":"SPEED LOGIC","version":"1.0","type":"link"}