Eibach Pro-Kit Lowering Springs – Toyota GR Supra A90 (E10-82-089-01-22)

OVERVIEW

The Eibach Pro-Kit lowers your car's center of gravity, reducing squat under acceleration, body roll in corners and nose-dive under braking. It also removes excessive fender-well gap for a more aggressive stance, and pairs well with Plus-1 or Plus-2 wheel and tire packages.

Every Pro-Kit is designed and tested by Eibach suspension engineers and performance driving professionals to deliver improved handling and appearance without compromising safety or ride quality. A proprietary progressive spring design keeps ride quality civilized while sharpening turn-in and body control. The Pro-Kit is also the foundation of the Eibach PRO-PLUS and PRO-SYSTEM-PLUS packages.

SPECS

• Set of four progressive-rate performance lowering springs (front and rear)
• Front drop: 1.7 in
• Rear drop: 1.2 in
• Not adjustable — fixed-rate lowering spring set
• Bump stops included
• Designed to be used with the OE dampers and OE spring isolators, which are retained during installation
• Eibach five-year warranty against factory defects in material and workmanship (per eibach.com)

PARTS INCLUDED

• 2 x front Pro-Kit springs
• 2 x rear Pro-Kit springs
• Front bump stops (Eibach BS770034)
• Rear bump stops (Eibach BS770143)
• Rear dust boots (Eibach BS770043)

TECH RESOURCES

Additional Parts Required

• Four-wheel alignment after installation is mandatory. Eibach requires camber, caster and toe to be inspected and adjusted once the springs are fitted, along with tire/wheel clearance, brake line clearance and ABS sensor clearance.
• Spring compressor and strut disassembly tools — the struts must come apart to swap springs. Installer-supplied.
• OE dampers or matched performance dampers. Eibach specifies retaining the original dampers and spring isolators with this kit; worn dampers should be replaced before or during installation.
• Confirm adaptive damper compatibility before ordering if your Supra is fitted with the electronically controlled damper system.
• Mark the orientation of the upper strut perch relative to the lower perch before disassembly on MacPherson strut corners to avoid noise on reassembly.

Installation

• Eibach Pro-Kit E10-82-089-01-22 installation instructions (PDF)

Notes

• Fitment data per the Eibach catalog listing for E10-82-089-01-22. Confirm your exact model year and damper configuration with Speed Logic before ordering.

PART NUMBER

• E10-82-089-01-22

VEHICLE APPLICATIONS