OVERVIEW

The Eibach Pro-Kit lowers your car's center of gravity, reducing squat under acceleration, body roll in corners and nose-dive under braking. It also removes excessive fender-well gap for a more aggressive stance, and pairs well with Plus-1 or Plus-2 wheel and tire packages.

Every Pro-Kit is designed and tested by Eibach suspension engineers and performance driving professionals to deliver improved handling and appearance without compromising safety or ride quality. A proprietary progressive spring design keeps ride quality civilized while sharpening turn-in and body control. The Pro-Kit is also the foundation of the Eibach PRO-PLUS and PRO-SYSTEM-PLUS packages.

SPECS

Set of four progressive-rate performance lowering springs (front and rear)
Front drop: 1.7 in
Rear drop: 1.2 in
Not adjustable — fixed-rate lowering spring set
Bump stops included
Designed to be used with the OE dampers and OE spring isolators, which are retained during installation
Eibach five-year warranty against factory defects in material and workmanship (per eibach.com)

PARTS INCLUDED

2 x front Pro-Kit springs
2 x rear Pro-Kit springs
Front bump stops (Eibach BS770034)
Rear bump stops (Eibach BS770143)
Rear dust boots (Eibach BS770043)

TECH RESOURCES

Additional Parts Required

Four-wheel alignment after installation is mandatory. Eibach requires camber, caster and toe to be inspected and adjusted once the springs are fitted, along with tire/wheel clearance, brake line clearance and ABS sensor clearance.
Spring compressor and strut disassembly tools — the struts must come apart to swap springs. Installer-supplied.
OE dampers or matched performance dampers. Eibach specifies retaining the original dampers and spring isolators with this kit; worn dampers should be replaced before or during installation.
Confirm adaptive damper compatibility before ordering if your Supra is fitted with the electronically controlled damper system.
Mark the orientation of the upper strut perch relative to the lower perch before disassembly on MacPherson strut corners to avoid noise on reassembly.

Installation

Eibach Pro-Kit E10-82-089-01-22 installation instructions (PDF)

Notes

Fitment data per the Eibach catalog listing for E10-82-089-01-22. Confirm your exact model year and damper configuration with Speed Logic before ordering.

PART NUMBER

E10-82-089-01-22

VEHICLE APPLICATIONS

Make	Model	Chassis	Engine	Years
Toyota	GR Supra 3.0 (RWD, automatic)	A90	3.0L Turbo I6 (B58)	2020–2026
Toyota	GR Supra 3.0 (RWD, manual)	A91	3.0L Turbo I6 (B58)	2023–2026
Toyota	GR Supra 2.0 (RWD, automatic)	A90	2.0L Turbo I4 (B48)	2021–2026