H&R Sport Sway Bar Kit – BMW 5-Series (F10, N52/N20/N55/N57/N63)

OVERVIEW

H&R's Sport Sway Bar Kit for the F10 5-Series pairs a larger front bar with a larger rear bar than the factory setup, increasing torsional stiffness at both ends of the car to reduce body roll under cornering load. A stiffer anti-roll bar keeps more of the tire's contact patch on the road through a corner, sharpening turn-in and giving the chassis a flatter, more controlled feel without altering ride height.

The kit is a direct bolt-on using the factory mounting locations and reuses the factory end links, and both bars are multi-hole adjustable so the front-to-rear roll-stiffness balance can be tuned to the driver's preference.

SPECS

• Front bar: 30mm, hollow, multi-hole adjustable
• Rear bar: 20mm, hollow, multi-hole adjustable
• Construction: cold-formed tubular steel, protective finish
• Increases torsional stiffness front and rear versus the factory sway bars to reduce body roll
• Does not change ride height, spring rate, or damping
• Sold as a complete Front & Rear Set only

PARTS INCLUDED

• H&R front and rear adjustable sway bars
• New mounting bushings and hardware included
• See the fitting instructions supplied in the box for the full bill of materials

TECH RESOURCES

Additional Parts Required

• None. H&R's sway bar kit ships complete with the bushings and hardware needed for installation; the factory end links are reused.
• Installer-supplied tools: jack and stands, standard hand tools, and a torque wrench.

Installation

• Illustrated fitting instructions are included in the box with the sway bar kit. H&R does not publish a separate per-application installation PDF for this sway bar; the technical sheet linked below covers spring-specific topics (bumpstop trimming, spring identification) and is not applicable to this sway bar.
• H&R Warranties & Claims (PDF) — official H&R warranty terms, coverage periods and claim procedure.

Notes

• Fitment confirmed against Turner Motorsport, ECS Tuning and LM Performance listings for part number 72470. Sources list this kit for 528i, 535i, 535d and 550i; the F10 M5 is not listed by any source and is not included below.

PART NUMBER

• 72470 — Front & Rear Set

VEHICLE APPLICATIONS