AWE Tuning S-FLO Carbon Fiber Intake – BMW M2 / M3 / M4 (G8X, S58)

OVERVIEW

The AWE S-FLO Carbon Intake for the S58-powered G80 M3, G82 M4 and G87 M2 replaces the factory intake with twin carbon housings feeding two large 4.5"-inlet inverted cone filters, for 142% more filter area than stock and a dyno-proven 14 hp and 9 lb-ft at the wheels.

It is built from 2x2 carbon with a UV-stable clear coat, uses machined aluminum mounts and removable machined couplers, and is engineered to fit under the Competition Sport (CS) brace. Louvers direct more of the intake sound into the cabin. No tune is required.

SPECS

• Two 4.5"-inlet inverted cone S-FLO filters, washable and oil-less
• 142% more filter area than stock
• Up to 14 hp and 9 lb-ft at the wheels
• 2x2 carbon with UV-stable clear coat; machined aluminum mounts and removable machined couplers
• Fits under the Competition Sport (CS) brace
• No tune required; not CARB approved

PARTS INCLUDED

• Driver and passenger carbon tubes and boxes
• Two 4.5" inverted cone filters
• Silicone and flex couplers, machined couplers, O-rings and clips
• Mount posts, bolts, washers and worm clamps

TECH RESOURCES

Additional Parts Required

• None. AWE specifies no additional parts and no tune; OE hardware is reused.

Installation

• AWE S-FLO Carbon Intake for BMW G8X M2 / M3 / M4 installation instructions (Rev 1.1, PDF)

Notes

• AWE lists the G80 M3, G82 M4 and G87 M2; the G83 M4 convertible is listed by ECS Tuning.

PART NUMBER

• 2660-15489

VEHICLE APPLICATIONS