Bilstein B12 Pro-Kit – BMW 335i / 335d (E90 RWD)

OVERVIEW

The BILSTEIN B12 (Pro-Kit) is a matched, fixed-height performance suspension package: a complete set of BILSTEIN Performance dampers paired with application-specific EIBACH Pro-Kit progressive-rate lowering springs. Depending on application the kit lowers the car between 24 and 40 mm.

Dampers and springs are tuned together for each specific vehicle rather than sold as generic parts, which is what BILSTEIN calls its Professional Cornering System (PCS). The result is precise response, excellent performance and predictable control with a level of ride comfort the factory setup cannot match at a lowered ride height, plus a lower, action-ready stance.

The B12 (Pro-Kit) is the product of two companies at the top of their industries: the shock absorber experts at BILSTEIN and the spring professionals at EIBACH. BILSTEIN dampers use monotube gas pressure technology and are made in Germany.

SPECS

• BILSTEIN damper family: B12 (Pro-Kit) — fixed-height performance kit
• Internal design: monotube gas pressure
• Not ride-height adjustable — the B12 (Pro-Kit) is a fixed-height kit; BILSTEIN’s threaded, height-adjustable kits are the B14 and B16 lines
• Springs: EIBACH Pro-Kit, application-specific progressive rate
• Position: front and rear (complete four-corner kit)
• Finish: dampers yellow / springs dark gray
• Lowering: up to 40 mm
• Made in Germany
• Warranty: BILSTEIN Limited Lifetime Warranty (as published by BILSTEIN for this part number)

PARTS INCLUDED

• Four BILSTEIN B12 (Pro-Kit) performance dampers — front and rear
• Four EIBACH Pro-Kit application-specific progressive-rate lowering springs — front and rear
• Complete kit as supplied by BILSTEIN; see the installation instructions for the full bill of materials.

TECH RESOURCES

Additional Parts Required

• Four-wheel alignment. A full four-wheel alignment is required after installation — camber, caster and toe all change when ride height changes.
• Professional installation. BILSTEIN requires that the work be carried out by a qualified technician on a chassis hoist with proper spring-compression equipment; improper installation risks serious injury.
• Check EDC. Confirm whether your car is equipped with Electronic Damping Control before ordering — EDC cars require different mounting components and BILSTEIN lists separate part numbers for them.
• Installer-supplied: chassis hoist or jack stands, spring compressor, and a torque wrench — do not use impact tools on suspension fasteners.

Installation

• BILSTEIN shock absorber and spring mounting instructions (E4-WM5-Y180A00, DE/EN, PDF)

Notes

• BILSTEIN lists this kit for the BMW 335i 2007–2011 and 335d 2009–2011. BILSTEIN publishes generic mounting instructions for this kit rather than a vehicle-specific guide; use them alongside the BMW factory repair procedure for your chassis.

PART NUMBER

• 46-180568 — BILSTEIN B12 (Pro-Kit) suspension kit, BMW 335i 2007–2011 / 335d 2009–2011 (RWD)

VEHICLE APPLICATIONS