EBC Yellowstuff Brake Pads – Toyota GR Supra 2.0 (A90) – Front & Rear

OVERVIEW

Yellowstuff is EBC's high-friction aramid-fiber street and track compound, with strong bite from cold that gets stronger as it heats up during hard driving.

This listing covers front and rear Yellowstuff pad sets for the Toyota GR Supra 2.0 (A90, B48) with the factory single-piston front calipers and 13.0in rear rotors. Select axle above.

SPECS

• Compound: EBC Yellowstuff (high-friction street/track)
• Front pad: GR Supra 2.0 single-piston front caliper, 330mm (13.0in) front rotor
• Front pad dimensions: 129.0 x 74.6 x 18.6mm
• Rear pad: 330mm (13.0in) rear rotor
• Rear pad dimensions: 98.4 x 64.2 x 16.0mm
• ECE R90 approved
• Brake-In surface coating for faster initial bedding

PARTS INCLUDED

• One axle set (4 pads) of EBC Yellowstuff brake pads in the axle selected above
• Mounting hardware and abutment clips are not included

TECH RESOURCES

Additional Parts Required

• None. This is a pads-only set: EBC does not include mounting hardware or abutment clips, so reuse your vehicle's existing hardware if it is in good condition.

Installation

• Installation follows the standard factory front or rear brake pad replacement procedure; professional installation is recommended.
• EBC Bedding-In Guide (ebcbrakes.com) – follow EBC's bedding-in procedure after fitting. Yellowstuff needs a careful bed-in; EBC recommends street-bedding the pads before any track use.

Notes

• GR Supra 2.0 only. The front pad does not fit the GR Supra 3.0 Brembo front calipers; see Yellowstuff for GR Supra 3.0.
• Also available for the GR Supra 2.0 in Redstuff and Bluestuff NDX.
• Not sure which brakes your car has? Contact Speed Logic to check by VIN.

PART NUMBER

• DP42245R — Yellowstuff Front
• DP42405R — Yellowstuff Rear (13.0in rear rotor)

VEHICLE APPLICATIONS