OVERVIEW
KW Variant 3 brings race technology to the road with independently adjustable compression and rebound damping. Motorsport-derived valving lets the driver build a setup for the street, a back road or a track day rather than accepting a single fixed tune.
KW's patented dual-level valve system separates the two adjustments: rebound damping is set for ride comfort and body control, while compression damping controls the car's driving dynamics. Ride height is independently adjustable on top of that, so damper settings and stance can be dialled in separately.
SPECS
- KW Variant 3 (V3) coilover kit
- Independently adjustable compression damping
- Independently adjustable rebound damping
- KW patented dual-level valve system
- Ride height: continuously adjustable within the ranges below
- Front axle lowering range: 1.2–2.1 in
- Rear axle lowering range: 0.9–2.0 in
PARTS INCLUDED
- Complete coilover kit as supplied by KW; see the installation instructions for the full bill of materials.
TECH RESOURCES
Additional Parts Required
- Four-wheel alignment. A full alignment is mandatory after installation and after any subsequent ride-height change.
- Professional installation. Fitment should be carried out by a qualified suspension shop; the kit changes suspension geometry and load paths.
- Tire-to-strut and fender clearance check. Verify clearance through full steering lock and suspension travel before driving, especially with aftermarket wheels, tires or spacers.
- Headlight levelling / ride-height sensor. Cars fitted with self-levelling xenon headlights carry a ride-height sensor link on the axle; it must be checked and re-indexed after lowering.
- Spring compressor, KW damper adjusters and standard suspension service tools are supplied by the installer.
Installation
Notes
- KW lists order number 35220062 for the 1 Series Convertible, type 182 / 1C — the E88 body. The existing listing title referenced “E82 (182)”; type 182 is the shared platform designation. Please confirm your exact chassis and build date with Speed Logic before ordering.
PART NUMBER
- 35220062 — KW Variant 3 coilover kit, BMW 1 Series Convertible (E88 / type 182)
VEHICLE APPLICATIONS
| Make / Model | Chassis | Engine | Years |
|---|---|---|---|
| BMW 1 Series Convertible (all engines) | E88 (type 182 / 1C) | All | 2008–2013 |