OVERVIEW
The Variant 3 is KW's two-way adjustable coilover and the one most people actually want. Compression and rebound are on separate adjusters, so you can firm up body control without also killing rebound compliance, and ride height is continuously adjustable across the kit's range. It is the sensible step up from a spring-only kit and a large step up from the factory strut.
The stock damper is the limiting part on the G30 5 Series. Factory valving is a single fixed compromise and the ride height is whatever the car left the line at. The V3 replaces the whole strut with a rebuildable, height-adjustable, damping-adjustable unit.
This listing covers the G30 530i and 540i. 352200BY fits the RWD car; 352200BZ fits xDrive. Both are Bundle kits, supplied with the KW ESC/EDC cancellation module for the factory adaptive dampers.
SPECS
- 2-way adjustable damping: independent compression and rebound
- Continuously adjustable ride height
- Both part numbers are Bundle kits, supplied with the KW ESC/EDC cancellation module, deleting the factory adaptive dampers without fault codes
PARTS INCLUDED
- Front and rear KW Variant 3 coilover units with matched springs
- KW ESC/EDC cancellation module included on both part numbers
- Mounting hardware and KW's fitting instructions
TECH RESOURCES
Additional Parts Required
- Both 352200BY and 352200BZ are Bundle kits and already include the ESC/EDC cancellation module; no separate module purchase is needed.
- A corner-balance and a full four-wheel alignment are required after installation. Budget for both before the car is driven.
Installation
- Installation instructions (352200BY): PDF.
- Installation instructions (352200BZ): PDF.
- Setup manual (352200BY): PDF.
- Setup manual (352200BZ): PDF.
- In brief: full strut-out replacement front and rear, the ESC module plugged into the OE damper connectors, ride height set inside KW's published range, then corner-balance and alignment.
Notes
- Price is for the item selected only; labor is not included.
- Added 530e (RWD, plug-in hybrid) to VEHICLE APPLICATIONS — KW's own fitment chart for 352200BY (RWD Bundle) lists the 530e for 2018–2023, which was missing from this table. Checked against KW's fitment chart on 2026-09-03.
PART NUMBER
- 352200BY — V3 Bundle, BMW 530i / 540i G30 RWD
- 352200BZ — V3 Bundle, BMW 530i xDrive / 540i xDrive G30
VEHICLE APPLICATIONS
| Make | Model | Chassis | Engine | Years |
|---|---|---|---|---|
| BMW | 530i | G30 | B46 / B48 2.0L Turbo I4 | 2017–2023 |
| BMW | 530e | G30 | B48 2.0L Turbo I4 PHEV | 2018–2023 |
| BMW | 540i | G30 | B58 3.0L Turbo I6 | 2017–2023 |
| BMW | 530i xDrive | G30 | B46 / B48 2.0L Turbo I4 | 2017–2023 |
| BMW | 540i xDrive | G30 | B58 3.0L Turbo I6 | 2017–2023 |