KW DDC Plug & Play Coilovers – BMW X3 (F25) / X4 (F26)

OVERVIEW

KW DDC (Dynamic Damping Control) Plug & Play coilovers give the F25 X3 and F26 X4 electronically adjustable dampers that work with the car's factory adaptive suspension system. All of the factory adaptive settings, modes and controls remain in use, so you gain a full coilover setup without giving up the OE adaptive suspension.

The DDC kit is fully height adjustable and carries damper tuning presets developed to work with the factory adaptive modes. The dampers connect to the on-board electronics through the vehicle's original plugs, so no special wiring modifications are required.

SPECS

• Front lowering range: 1.2–2.0 in
• Electronically adjustable damping controlled by the factory adaptive suspension system
• Retains all factory adaptive settings, modes and cabin controls
• Damper tuning presets matched to the OE adaptive modes
• Full, continuous ride-height adjustment
• Connects to the on-board electronics using the vehicle's original plugs — no wiring modification required

PARTS INCLUDED

• Complete KW DDC Plug & Play coilover kit as supplied by KW; see the installation instructions for the full bill of materials.

TECH RESOURCES

Additional Parts Required

• Four-wheel alignment — mandatory after installation and after any change in ride height.
• Professional installation — KW specifies fitment by a qualified suspension shop.
• Driver-assistance cameras and radar require recalibration after the car is lowered.
• Confirm tire-to-strut and tire-to-fender clearance with your wheel and tire package before setting final ride height.

Installation

• KW DDC 39020032 installation instructions (PDF) — official KW installation document for BMW X3 / X4 4WD.

Notes

• Fits vehicles factory-equipped with EDC only. Rear lowering range is not published in KW's US listing data for this kit — contact Speed Logic if you need it confirmed before ordering.

PART NUMBER

• 39020032

VEHICLE APPLICATIONS