*Currently out of Stock - will ship within 15-20 days of purchase at the moment (12/14/24)*
Speed Logic is proud to announce the release of a 5 Bar MAP Sensor option for the Toyota Supra and BMW S58, B58. B48, B47, B46, B42, B57 Engines. This MAP Sensor is fully Plug and Play and fits in the factory Chargepipe location without need for any additional wire harnesses or modifications. This sensor is most commonly used on the B58 and S58 engines to read higher Boost pressures than what the Factory OEM MAP Sensor allows in stock form. Once you max out the Factory OEM Sensor's limits you will have a need for a higher resolution to run higher than roughly ~45psi. This is very common with Single Turbo vehicles that are pushing the limits or looking to push the limits in the future. Save yourself the headache of searching for an Aftermarket 5 Bar sensor such as the AEM, Holley, Haltech, ProEFI, etc that all require modifications and/or adapters along with custom wiring harnesses to get up and running. Many of these will take extra work to get up and running especially if you are running on a Stock Factory OEM ECU/DME for Tuning needs. This sensor fully works with the Factory OEM ECU/DME as long as your Tuner can change the Scaling for the MAP Sensor with the values and information shared below.
KEY FEATURES:
- Allows Reading Boost up to ~58psi
- Simple 2 Minutes installation to get up and running
- OEM Genuine BMW Sensor
- Fully Plug and Play (PnP)
- Rescale values provided for your Tuner below
- Supports all Tuning Platforms: MHD, Bootmod3, EcuTek, etc
- Shipping Contents: (1) Genuine OEM BMW 5 Bar MAP Sensor
- Includes Speed Logic 1-year warranty against defects, fitment issues, etc
WHATS INCLUDED:
- (1) Genuine OEM BMW 5 Bar MAP Sensor
THIS PRODUCT FITS THE FOLLOWING BMW VEHICLES/APPLICATIONS:
- Any BMW w/ S58, B58, B48, B47, B46, B42, B57 Engines
- Toyota Supra A90 & A91 Chassis w/ B58, B48, or B46 Engines
- This product fits both Left Hand Drive (LHD) and Right Hand Drive (RHD) Vehicles without modifications
TUNING:
This 5 Bar MAP Sensor is supported by all major Tuning Suites included below. We recommend using one of the following Tuning suites as adequate tuning options to accompany this product. Each of the following Tunes needs to be adjusted to allow accommodation for Scaling on this new 5 Bar MAP Sensor to ensure smooth running of your vehicle after installation. Be sure to reach out to your Tuner and let them know you need an updated map with the 5 Bar MAP Sensor scaling adjusted along with any Fueling related properly so you have no issues.
- MHD Flasher including MHD+ CustomROM
- Bootmod3 Tune including CustomROM
- EcuTek including RaceROM CustomROM
SCALING ADJUSTMENTS FOR TUNER:
-
Map Sensor Scaling
- 1.05v = 0.00psi
- 3.00v = 29.00psi
- 5.00v = 58.00psi