H&R Sport Lowering Springs – BMW M3 Competition xDrive (G80, S58)

OVERVIEW

Improve the look and the handling of your G80 M3 Competition without giving up the factory adaptive suspension. H&R designed this Sport Spring set to work with or without the adaptive dampers, so it drops straight in over the OEM springs with no other changes.

H&R Sport Springs are engineered to deliver improved handling and a lowered ride height while maintaining ride quality, which makes them the practical choice for an enthusiast who wants race-bred components designed for street use. The H&R philosophy is simple and effective: manufacture the best suspension products using only the highest grade materials. That philosophy is what made H&R an industry leader in high-performance suspension components, on the street and on the track.

SPECS

• Approximate front lowering: 1.2"
• Approximate rear lowering: 0.4"
• Works with the factory adaptive suspension — direct swap-in over the OEM springs
• Compatible with OE and aftermarket shock absorbers
• Linear or progressive spring design depending on application
• Lowered center of gravity for improved handling characteristics
• Powder coated for enhanced appearance and corrosion resistance
• Produced in Germany

PARTS INCLUDED

• Complete front and rear spring set as supplied by H&R Springs; see the installation instructions for the full bill of materials.

TECH RESOURCES

Additional Parts Required

• None. H&R specifies no additional hardware for this spring set.
• Four-wheel alignment after installation — required by H&R.
• Professional installation. H&R specifies that its springs be installed by a professional suspension mechanic.
• Spring compressor required to disassemble the factory struts on this spring-only kit.
• Retain all OEM hardware, bumpstops and dust boots — H&R requires them to be reused.

Installation

• H&R Springs Technical & Installation Information (PDF) — H&R pre- and post-installation guidance, front/rear spring identification, ride-height measurement, bumpstop trimming and alignment requirements.
• Vehicle-specific instructions are supplied in the kit.

PART NUMBER

• 28616-3

VEHICLE APPLICATIONS