H&R Sport Sway Bar Kit – BMW 530i xDrive / 540i xDrive / M550i xDrive (G30, B48/B58/N63)

OVERVIEW

H&R's Sport Sway Bar Kit for the xDrive G30 530i, 540i and M550i replaces the factory anti-roll bars with stiffer H&R bars, increasing roll stiffness to cut body roll and sharpen turn-in without lowering the car or affecting ride quality. It's available as a matched Front & Rear Set, or as a Front Only or Rear Only bar so you can tune the front-to-rear balance or upgrade one end at a time.

H&R's urethane/Teflon composite bushings are included with each bar; they resist squeaks and need no lubrication. This is the xDrive kit for cars without Active Roll Stabilization; rear-wheel-drive cars take 72654.

SPECS

• Front bar: 34mm, non-adjustable (70654-2)
• Rear bar: 25mm, adjustable (71654)
• Increases roll stiffness versus the factory sway bars to reduce body roll
• Does not change ride height, spring rate or damping
• Urethane/Teflon composite bushings — no lubrication required
• Made in Germany at H&R's ISO9001-certified facility
• Available as Front & Rear Set, Front Only, or Rear Only
• For cars without Active Roll Stabilization (active stability control) only

PARTS INCLUDED

• Sway bar(s) for the selected configuration (Front & Rear Set, Front Only, or Rear Only)
• H&R mounting bushings and hardware for the selected configuration
• See the fitting instructions supplied in the box for the full bill of materials

TECH RESOURCES

Additional Parts Required

• None. H&R includes the mounting bushings and hardware needed for installation with each configuration; the factory end links are reused.
• Suspension check — confirm the car does not have Active Roll Stabilization (active stability control) before ordering.
• Installer-supplied tools: jack and stands, standard hand tools and a torque wrench.

Installation

• Illustrated fitting instructions are included in the box with each sway bar. H&R does not publish a separate per-application installation PDF for its sway bars.
• H&R Warranties & Claims (PDF) — official H&R warranty terms, coverage periods and claim procedure.

Notes

• The rear bar (71654) is shared with the RWD kit 72654; the front bar is xDrive-specific.
• Confirm your exact model and drivetrain with Speed Logic before ordering.

PART NUMBER

• 72654-2 — Front & Rear Set
• 70654-2 — Front Only
• 71654 — Rear Only

VEHICLE APPLICATIONS