Injen SP Cold Air Intake System – Toyota GR Supra

OVERVIEW

The Toyota GR Supra is quick from the factory, but the OE intake tract on the A90/A91 is heavily restricted and chokes the turbo before the engine can make its full output. Injen's R&D team took the car into the lab and developed the SP2300 around a large 4.0" mandrel-formed 6061-T6 aluminum intake tube that opens that tract up and lets the turbo and engine breathe.

The SP series is Injen Technology's flagship traditional aluminum intake line, and the SP2300 was engineered for the cleanest installation on the market. The tube gives a smooth, uninterrupted path for highly efficient airflow, and Injen confirmed that a safe air/fuel ratio is maintained throughout the power band. On Injen's dyno the SP2300 produced an additional 15 horsepower and 17 lb-ft of torque.

Air is drawn through a fully serviceable Injen SuperNano-Web dry filter, which adds filtration surface area for greater airflow without an oiled media, and a purpose-built heat shield isolates it from underhood heat. The system adds an aggressive intake growl as the turbo spools, and is offered in three finishes: SP2300P polished, SP2300WB wrinkle black and SP2300WR wrinkle red. Backed by the Injen Technology Limited Lifetime Warranty.

SPECS

• Series: Injen SP cold air intake system
• Dyno-proven gains of up to 15 hp and 17 lb-ft of torque
• Intake tube: 6061-T6 aluminum, 4.0" diameter
• Finishes: polished, wrinkle black, wrinkle red
• Filter: Injen SuperNano-Web dry air filter, 4" inlet, fully serviceable
• Replacement air filter part number X-1026-BB
• Includes an application-specific heat shield
• Maintains factory air/fuel ratios
• Not CARB exempt — not legal for sale or use on pollution-controlled vehicles in California
• Injen Technology Limited Lifetime Warranty

PARTS INCLUDED

• 1 x Intake tube (W-SP2300)
• 1 x Heat shield (X-11171)
• 1 x 4" SuperNano-Web dry filter, blue media (X-1026-BB)
• 1 x 4" straight hose (X-3129)
• 2 x #64 clamps (X-4006)
• 1 x Rubber trim, 14" length (X-6058)
• 1 x Vinyl trim, 2" length (X-6023)
• 1 x Vinyl trim, 8" length (X-6023)
• 1 x M4 screws (X-6047)
• 1 x M6 x 16 hex screw (X-6005)
• 1 x Fender washer (X-6011)
• 2 x M6 nuts (X-6002)
• 1 x M6 Vibra-mount (X-6020)

TECH RESOURCES

Additional Parts Required

• None. Injen specifies no additional hardware, tuning or fluids for this intake — all required mounting hardware is supplied in the kit.
• Installer-supplied tools: metric socket and wrench set, flat and Phillips screwdrivers, a trim panel tool and a torque wrench.
• Optional service items: Injen replacement dry air filter X-1026-BB and an Injen dry-filter cleaning kit.

Installation

• Injen SP2300 Installation Instructions (PDF)

Notes

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• sl-note: Injen's current official application list extends this intake to the 2020–2025 GR Supra and adds the 2020–2025 BMW Z4 M40i, both broader than the 2020–2021 Supra range in the product title. Confirm your year and chassis with Speed Logic before ordering. This intake fits the 3.0L turbo six only — it does not fit the four-cylinder Supra 2.0.

PART NUMBER

• SP2300P — polished finish
• SP2300WB — wrinkle black finish
• SP2300WR — wrinkle red finish

VEHICLE APPLICATIONS