KW Variant 1 Coilovers – BMW 3 Series Sedan / Coupe (E90/E92)

OVERVIEW

KW Variant 1 is the sporty, balanced entry point into the KW coilover range. Damping is pre-set at the factory by KW's engineers, who develop every application through extensive driving tests to strike a balance between sporty handling, ride comfort and safety. The driver chooses the ride height; KW has already decided the damper tune.

On the rear-wheel-drive E90 sedan and E92 coupe the kit replaces the factory struts and shocks with height-adjustable coilovers, letting you set the stance you want while keeping a validated, road-developed damper calibration.

SPECS

• KW Variant 1 (V1) coilover kit
• Damping: KW factory pre-set, not user adjustable
• Ride height: continuously adjustable within the ranges below
• Front axle lowering range: 1.2–2.3 in
• Rear axle lowering range: 0.9–2.1 in
• Application: rear-wheel-drive E90 sedan and E92 coupe models

PARTS INCLUDED

• Complete coilover kit as supplied by KW; see the installation instructions for the full bill of materials.

TECH RESOURCES

Additional Parts Required

• Four-wheel alignment. A full alignment is mandatory after installation and after any subsequent ride-height change.
• Professional installation. Fitment should be carried out by a qualified suspension shop; the kit changes suspension geometry and load paths.
• Tire-to-strut and fender clearance check. Verify clearance through full steering lock and suspension travel before driving, especially with aftermarket wheels, tires or spacers.
• Headlight leveling / ride-height sensor. Cars fitted with self-leveling xenon headlights carry a ride-height sensor link on the axle; it must be checked and re-indexed after lowering.
• Spring compressor and standard suspension service tools are supplied by the installer.

Installation

• KW installation instructions – No. 686 20 032, BMW 3 Series Sedan (E90) and Coupe (E92) (PDF)

Notes

• Rear-wheel drive only — xDrive models are not covered. Year spans reflect the E90/E92 production range covered by this kit; individual trims were not offered across every year. Confirm your exact model, year and drivetrain with Speed Logic before ordering.

PART NUMBER

• 10220032 — KW Variant 1 coilover kit, BMW 3 Series E90 sedan / E92 coupe, RWD

VEHICLE APPLICATIONS