KW Coilover Kit V2 – BMW 330i xDrive / M240i xDrive / M340i xDrive (G20 / G42, Non-EDC)

OVERVIEW

The KW V2 coilover adds adjustable rebound damping to a height-adjustable KW coilover. Rebound is set in 16 clicks with the supplied adjuster at the top of the piston rod, so you can firm the car up for more body control and stability at speed, or soften it for comfort, without changing the compression valving.

KW develops each kit's damper settings and spring rates on its 7-post test rig and the Nürburgring Nordschleife. Ride height is adjusted on KW's dirt-resistant trapezoidal thread using the stainless steel front struts and a separate rear height adjuster, and the struts are inox-line stainless steel built in Fichtenberg, Germany.

SPECS

• Rebound damping: adjustable, 16 clicks (KW recommended start: 9 clicks open front and rear)
• Compression damping: pre-set by KW
• Front lowering: 1.0–1.8 in
• Rear lowering: 1.0–1.8 in
• Height adjustment: threaded front strut housings; adjustable rear springs and dampers
• Construction: inox-line stainless steel strut housings
• For cars without factory electronic dampers (EDC)
• Made in Germany by KW automotive

PARTS INCLUDED

• Two front coilover struts and two rear dampers with springs
• Rear height adjusters, helper springs and spring adapters for both rear control-arm versions
• Rebound adjustment tool, strut spacer sleeves, piston-rod nuts and KW documentation

TECH RESOURCES

Additional Parts Required

• None for cars without factory adaptive (EDC) dampers.
• M240i xDrive: KW does not release this kit for cars with factory electronic dampers.
• 330i xDrive and M340i xDrive with factory electronic dampers: KW requires the electronic dampers to be shut down with a KW deactivation kit (not included). Contact Speed Logic for the correct kit for your car.
• A four-wheel alignment is required after installation and after any ride-height change.
• Check tire-to-strut and tire-to-fender clearance at the chosen ride height; KW specifies a minimum of 5 mm.
• Cars with ride-height sensors or camera/radar driver-assistance systems need those systems adjusted or recalibrated after lowering.

Installation

• KW V2 152200DK installation instructions – BMW G20 / G42 xDrive (PDF)
• KW Variant 2 rebound damping setup manual 685 77 514 (PDF)
• Request an Install Appointment

Notes

• For the 330i xDrive and M340i xDrive, KW releases 152200DK for a front gross axle weight rating (FGAWR) of 1,101–1,155 kg, shown on the door-jamb sticker.
• Confirm your exact model and suspension equipment with Speed Logic before ordering.
• Price is for parts only; labor is not included.

PART NUMBER

• 152200DK — KW Coilover Kit V2

VEHICLE APPLICATIONS