Pure Turbos Pure800 Turbo Upgrade – Toyota Supra (A90/A91)

OVERVIEW

Pure Turbos’ industry-leading B58 Pure800 for the A90/A91 Toyota GR Supra, supplied on a brand new aftermarket housing. No core is required and no core fee applies.

The turbo combines a Pure Turbos billet compressor wheel with a larger, stronger turbine wheel and an upgraded bearing housing, is VSR high-speed balanced, and comes with a hi-flow 3D printed inlet. Pure engineered and proved the Pure800 to support 700whp+ on suitable supporting modifications and fuel. Currently offered in 6-port configuration; a 2-port option is listed by Pure as coming soon.

SPECS

• Pure Turbos custom billet compressor wheel
• Larger, stronger high-flow turbine wheel
• Upgraded bearing housing
• CNC machined and VSR high-speed balanced
• New aftermarket housing (no OEM core used)
• Hi-flow 3D printed inlet included
• 6-port configuration (2-port listed by Pure as coming soon)
• Pure Turbos rating: engineered and proven to support 700whp+
• Build-to-order: allow approximately 3–4 weeks, and 4–8 weeks during peak season
• No core required — supplied on a new aftermarket housing, so your factory turbocharger(s) stay in your hands
• Warranty: Pure Turbos one-year, unlimited-mileage limited warranty

PARTS INCLUDED

• One NEW Pure800 upgrade turbocharger on a new aftermarket housing
• Hi-flow 3D printed inlet
• Complete kit as supplied by Pure Turbos; see the installation instructions for the full bill of materials.

TECH RESOURCES

Additional Parts Required

• A custom ECU tune is mandatory. Pure Turbos states: “DO NOT WIDE OPEN THROTTLE WITHOUT A PROPER TUNE.” Tune options we stock: MHD Super License for Toyota Supra B58, bootmod3 A90/A91 Supra tune, JB4 Tuner for Toyota Supra Mk5
• New gaskets and O-rings. Pure Turbos: “Always, use new gaskets and O-rings (where applicable).” These are not supplied with the turbocharger.
• No core turbochargers or core deposit are needed for this version — it ships on a new aftermarket housing.
• Fueling headroom for the higher power targets: an E85 blend — a flex-fuel kit such as the Fuel-It Flex Fuel Kit for the MKV Supra B48/B58 lets the tune read ethanol content directly — plus port injection and an upgraded low-pressure fuel pump at the top of the range.

Installation

• Pure Turbos installation, pre-lube and break-in procedure (manufacturer FAQ): pureturbos.com/faq — pre-lube the turbocharger through the oil inlet, spin the compressor wheel to coat the bearings, idle 5–10 minutes without revving, then drive on low boost/light throttle until the car is properly tuned
• Professional installation is strongly recommended; turbocharger removal and refitting requires the correct torque specs, clean oil and coolant feed lines and a full oil service.

Notes

• Pure Turbos does not publish an official part number for this upgrade and no SKU is recorded against this listing, so no PART NUMBER section is shown. Confirm the exact configuration with Speed Logic when ordering.
• Confirm whether your car is a 2-port or 6-port B58 before ordering — Pure currently supplies this turbo in 6-port form.

VEHICLE APPLICATIONS