Wagner Tuning Competition Intercooler Kit 200001124 – BMW S55 M2 Competition / M3 / M4 (F8x)

OVERVIEW

The 3.0 liter S55B30 turbo engine in the BMW M3 and M4 uses an indirect charge-air cooling circuit, so the charge air is cooled by a water-cooled intercooler. This WagnerTuning high-performance unit replaces that intercooler.

The kit uses a new tube-fin competition core developed specifically for the demands of the M3 and M4, offering 114% more external core volume than the stock intercooler. The calculated ratio between inner and outer cooling surface generates maximum heat transfer while preserving the best possible internal air flow. The cast aluminum end tanks were designed in CAD and optimized through CFD simulation, giving excellent cooling with minimal back pressure — which is why the kit suits racing use as well as fast road driving.

All WagnerTuning radiators carry a heat-conductive anti-corrosion coating to ensure a lasting cooling effect. Installation is plug and play and straightforward, and instructions are included in the box.

SPECS

• Core type: tube-fin competition core
• Wagner core dimensions: 287 mm x 185 mm x 115 mm (11.3 in x 7.3 in x 4.5 in)
• Wagner core volume: 6.10 liters
• Stock core dimensions: 276 mm x 136 mm x 76 mm (10.9 in x 5.3 in x 3.0 in)
• Stock core volume: 2.85 liters
• External core volume: 114% greater than stock
• Weight: 9.5 kg
• End tanks: cast aluminum, CAD-designed and CFD-optimized
• Coating: heat-conductive anti-corrosion coating
• Significantly better cooling performance and less pressure drop than stock
• 100% pressure resistance; 100% plug and play
• Warranty: up to 4 years

PARTS INCLUDED

• 1 x WagnerTuning Competition intercooler
• 1 x set of mounting material
• 1 x installation instructions

TECH RESOURCES

Additional Parts Required

• None. Wagner Tuning specifies no additional hardware — the kit is a 1:1 plug-and-play replacement for the OEM water-cooled intercooler.
• M2 Competition (F87) only: Wagner's instructions call for a minor adjustment inside the hood to clear the intercooler.
• The cooling system must be refilled to BMW's specification after installation.

Installation

• Wagner Tuning 200001124 installation instructions (PDF)

Notes

• THIS ITEM CAN ONLY BE USED IN A COMPETITION RACING VEHICLE THAT IS NOT DRIVEN ON PUBLIC ROADS. UNDER CALIFORNIA STATE LAW IT IS NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE!
• For factory twin-turbo S55 cars. Cars converted to a single turbo need Wagner's separate single-turbo version (200001124.ST).

PART NUMBER

• 200001124

VEHICLE APPLICATIONS