Product details
OVERVIEW
The Variant 3 is KW's two-way adjustable coilover and the one most people actually want. Compression and rebound are on separate adjusters, so you can firm up body control without also killing rebound compliance, and ride height is continuously adjustable across the kit's range. It is the sensible step up from a spring-only kit and a large step up from the factory strut.
These SUVs run on air springs from the factory, which sag over time and eventually leak. The V3 replaces the rear air suspension outright with a rebuildable, height-adjustable, damping-adjustable coilover, front and rear.
This listing covers the standard F15 X5 (not the M performance models — see our separate X5 M / X6 M listing for those). Per KW's own published fitment, 352200AM is the Bundle for X5s (F15) ordered with factory Electronic Damper Control (EDC) and includes KW's ESC/EDC cancellation module. KW does not publish an EDC/Bundle configuration for the non-M X6 (F16) — every F16 X6 in KW's fitment data uses 352200AL, the non-EDC kit, sold as a separate listing.
SPECS
- 2-way adjustable damping: independent compression and rebound
- Continuously adjustable ride height
- Replaces the factory rear air suspension on the F15
- Supplied with the KW ESC/EDC cancellation module, deleting the factory adaptive dampers without fault codes — X5 (F15) only
PARTS INCLUDED
- Front and rear KW Variant 3 coilover units with matched springs, replacing the factory rear air suspension
- KW ESC/EDC cancellation module
- Mounting hardware and KW's fitting instructions
TECH RESOURCES
Additional Parts Required
- This Bundle (352200AM) already includes the ESC/EDC cancellation module, so no separate module purchase is needed. KW's published fitment does not offer 352200AM for the non-M X6 (F16) — every F16 in KW's data takes 352200AL.
- A corner-balance and a full four-wheel alignment are required after installation, and matter even more on an AWD SUV. Budget for both before the vehicle is driven.
Installation
- Installation instructions (352200AM): PDF.
- Setup manual (352200AM): PDF.
- In brief: the factory rear air struts come out and the coilover replaces them; the ESC module plugs into the OE damper connectors on 352200AM; set ride height inside KW's published range, then corner-balance and align.
- Car does not have EDC (Electronic Damper Control)? See the KW V3 Non-EDC kit.
Notes
- Deleting the factory rear air suspension removes self-leveling and load compensation. This is expected with a coilover conversion.
- Price is for the item selected only; labor is not included.
- 352200AM is the Bundle for cars with EDC; 352200AL, the version for cars without EDC, is sold as a separate listing. KW's 352200AM is one kit that covers both the F15 X5 and the F85 / F86 X5 M / X6 M with EDC, which is why it also appears on our X5 M / X6 M listing.
PART NUMBER
- 352200AM
VEHICLE APPLICATIONS
| Make | Model | Chassis | Engine | Years |
|---|---|---|---|---|
| BMW | X5 xDrive35d | F15 | N57 3.0L Turbo I6 Diesel | 2014–2018 |
| BMW | X5 xDrive35i | F15 | N55 3.0L Turbo I6 | 2014–2018 |
| BMW | X5 xDrive40e | F15 | N20 2.0L Turbo I4 Plug-In Hybrid | 2016–2018 |
| BMW | X5 xDrive50i | F15 | N63TU 4.4L Twin Turbo V8 | 2014–2018 |