Öhlins Road & Track DFV Coilover Kit – BMW 2 / 3 / 4 Series (F22 / F23 / F30 / F32 / F33 / F36 / G20 / G22 / G23 / G26 / G42)

OVERVIEW

Öhlins Road & Track is a DFV (Dual Flow Valve) monotube coilover system built for street driving with a real track-day edge. Öhlins' patented DFV valving separates high- and low-speed damping forces so the car stays compliant over broken pavement while still controlling body motion hard on track. One adjuster per damper changes compression and rebound together, so there is no guesswork tuning the two independently.

Öhlins part number BMS MU00S1 is the dedicated Road & Track kit for the BMW 2 / 3 / 4 Series (F22 / F23 / F30 / F32 / F33 / F36 / G20 / G22 / G23 / G26 / G42), incl. xDrive, with its own spring rates, ride-height range and mounting hardware. It reuses the factory top mounts, is rebuildable, and carries Öhlins' 2-year limited warranty.

SPECS

• Monotube dampers with Öhlins DFV (Dual Flow Valve) technology; inverted McPherson front struts, conventional rear shock absorbers
• Compression and rebound damping adjusted together with one adjuster per damper
• Spring preload adjuster and separate ride-height adjustment, front and rear
• Uses the original top mounts (OE fitment); rebuildable; corrosion salt-spray tested to ISO 9227; 2-year limited warranty
• Spring rates: 80 N/mm front (approx. 457 lb/in), 140 N/mm rear (approx. 800 lb/in)
• Ride height: Approx. 20–30 mm lower than standard

PARTS INCLUDED

• Coilover kit including springs and mounting parts (front struts, rear shock absorbers)
• C-spanner for spring preload adjustment
• Owner's manual and mounting instruction
• Sticker set

TECH RESOURCES

Additional Parts Required

• Öhlins EDC Cancellation Kit (sold separately) — required on cars with factory electronic dampers (EDC / Adaptive M Suspension): Öhlins 35020-03 EDC Cancellation Kit for F22 / F23 / F30 / F32 / F33 / F36; Öhlins 35020-30 EDC Cancellation Kit for G20 / G22 / G23 / G26 / G42.
• Hybrid 3 Series (330e) — Öhlins recommends its higher-rate rear springs, part no. 48010-55 (sold separately, 2 required).
• A four-wheel alignment after installation is required; corner weighting is recommended for cars used on track.

Installation

• Öhlins BMS MU00S1 Mounting Instructions (PDF)
• Öhlins Road & Track Owner's Manual (PDF)

Notes

• Fits both rear-wheel-drive and xDrive F / G chassis 2 / 3 / 4 Series.
• Confirm your exact model, drivetrain and whether your car has factory adaptive dampers with Speed Logic before ordering.

PART NUMBER

• BMS MU00S1

VEHICLE APPLICATIONS