OVERVIEW

The TiAL Sport Q is the first revision of the original TiAL blow-off valve and remains the company's highest-flowing atmospheric valve. It bolts straight onto any standard TiAL V-band flange with no re-welding, so it drops onto a TiAL-flanged charge pipe in minutes. This listing is the black 50 mm Q valve supplied with a 10 psi spring and set up for external (atmospheric) venting.

The Q is built for turbocharged and supercharged applications, including centrifugal superchargers such as Paxton and Vortech. TiAL states that development work made the same size valve flow roughly 60% more than the original design, and that a single Q valve can support up to 1,800 hp.

SPECS

Valve size: 50.5 mm (1.98 in) poppet — TiAL catalogs the Q Series as a 51 mm valve
Spring: 10 psi (Q.10 configuration)
Venting: external / atmospheric
Finish: black anodized
Body and internals: CNC-machined from 6061 aluminum alloy
Mounting: aluminum V-band clamp with stainless steel hardware
Valve seal: clamped Viton O-ring, retained to prevent it sticking to the seat and pulling out
Valve stem and guide: Teflon-lubricated, hard anodize-coated for wear resistance
Air fitting: machined aluminum banjo-type fitting and bolt with oversized 10 mm hose barb for quick actuator response
Diaphragm: high-temperature Nomex-reinforced silicone
Flow: TiAL rates the Q Series at 219.7 lb/min (2,838 CFM) at 30 psi, full stroke
Flange compatibility: bolts to any standard TiAL flange without re-welding
Shipping weight: 2 lb; carton 18 x 7 x 6 in

PARTS INCLUDED

TiAL Sport Q 50 mm blow-off valve, black, with 10 psi spring installed
V-band clamp
TiAL machined aluminum air fitting
High-pressure O-ring

TECH RESOURCES

Additional Parts Required

A charge pipe with a TiAL 50 mm V-band flange. The Q valve does not include a weld flange in this configuration — see the SPEED LOGIC Chargepipe Upgrade Kit w/ TiAL BOV, which is also sold as a chargepipe-only option.
Vacuum signal line. TiAL specifies 1/4 in (6 mm) inner diameter hose, kept as short as possible and taken from a source downstream of the throttle body.

Installation

Notes

The Q is a universal valve: it fits any charge pipe or manifold carrying a standard TiAL 50 mm V-band flange, so exact chassis and year coverage depends on the charge pipe you run. Confirm fitment with Speed Logic before ordering.

PART NUMBER

Q.10 — Q Series 50 mm valve, 10 psi spring

VEHICLE APPLICATIONS

Make	Model	Chassis	Engine	Years
BMW	— N54 applications	—	N54 3.0L Twin-Turbo I6	—