EBC Redstuff Brake Pads – Toyota GR Supra 2.0 (A90) – Front & Rear

OVERVIEW

Redstuff is EBC's low-dust ceramic street compound, with strong bite from cold for daily and fast street driving.

This listing covers front and rear Redstuff pad sets for the Toyota GR Supra 2.0 (A90, B48) with the factory single-piston front calipers and 13.0in rear rotors. Select axle above.

SPECS

• Compound: EBC Redstuff (low-dust ceramic street)
• Front pad: GR Supra 2.0 single-piston front caliper, 330mm (13.0in) front rotor
• Front pad dimensions: 129.0 x 74.6 x 18.6mm
• Rear pad: 330mm (13.0in) rear rotor
• Rear pad dimensions: 98.4 x 64.2 x 16.0mm
• ECE R90 approved; street use, not intended for track
• Red Brake-In surface coating for faster initial bedding

PARTS INCLUDED

• One axle set (4 pads) of EBC Redstuff brake pads in the axle selected above
• Mounting hardware and abutment clips are not included

TECH RESOURCES

Additional Parts Required

• None. This is a pads-only set: EBC does not include mounting hardware or abutment clips, so reuse your vehicle's existing hardware if it is in good condition.

Installation

• Installation follows the standard factory front or rear brake pad replacement procedure; professional installation is recommended.
• EBC Bedding-In Guide (ebcbrakes.com) – follow EBC's bedding-in procedure after fitting. Redstuff self-beds over the first few hundred miles of street driving.

Notes

• GR Supra 2.0 only. The front pad does not fit the GR Supra 3.0 Brembo front calipers; see Redstuff for GR Supra 3.0.
• Also available for the GR Supra 2.0 in Yellowstuff and Bluestuff NDX.
• Not sure which brakes your car has? Contact Speed Logic to check by VIN.

PART NUMBER

• DP32245C — Redstuff Front
• DP32405C — Redstuff Rear (13.0in rear rotor)

VEHICLE APPLICATIONS