Product details
Your activation code is e-mailed within 12 hours of payment during business hours.
OVERVIEW
The MHD Flasher N55-E is a complete flash tuning application for your BMW N55 E-Series. Unlike a piggyback module it performs full DME remapping while retaining all OEM safety mechanisms, which allows for maximum performance, maximum safety and unrivaled drivability.
You can install MHD at home and start tuning immediately. Download the MHD Flasher N55-E app, connect the MHD wireless adapter to your vehicle's OBD-II port and pair it to your Apple iOS or Android device, then start the app — the initial installation completes within about 7 minutes, and further map changes take only about 60 seconds. You can return the vehicle to the factory OEM flash at any point, and no initial backup is required.
The Super License bundles every MHD function in one package: the Flasher license, the Monitor (datalogging and gauge) license, all three map packs and the MHD+ custom code features.
SPECS
General
- Engine: BMW N55 3.0L Turbo I6, E Series
- ECU: Bosch MEVD17 DME, flashed over OBD-II — full remap, not a piggyback
- Flash time: approx. 7 minutes initial install, 60 seconds per map switch
- Stage 0: stock power, with all flash options available
- Supported devices: Apple iOS 10.2 and higher, Android 6 and higher
Off-the-shelf maps by Twisted Tuning (road and dyno tested)
- Stock: 306 HP
- Stage 1 (stock cars): up to 335 HP / 520 Nm · peak 13–15 PSI tapering to 11–12 PSI at redline
- Stage 1+ (upgraded FMIC recommended): up to 350 HP / 590 Nm · peak 13–15 PSI tapering to 11–12 PSI at redline
- Stage 2 (high-flow downpipes recommended): up to 360 HP / 550 Nm · peak 14–18 PSI tapering to 11–12 PSI at redline
- Stage 2+ (high-flow downpipes plus upgraded FMIC recommended): up to 390 HP / 650 Nm · peak 14–18 PSI tapering to 11–12 PSI at redline
- Stage 2+ E30 (ethanol blends of 30%+; high-flow downpipes and upgraded FMIC recommended): up to 400 HP / 670 Nm · peak 19 PSI tapering to 13 PSI
- Octane variants: every pump-gas map comes in four versions — US ACN91, 91, 93, 95 / RON 93, 95, 98, 102
Flash options
- Exhaust burble (duration in base and sport mode, aggressiveness, minimum RPM, minimum speed)
- Kick-down deactivation
- Cold start noise reduction
- Variable coolant targets
- Top speed limiter (Vmax) removal
- Linear throttle mapping
- Individual minimum idle RPM
- Support for several aftermarket parts
MHD+ features (included)
- On-the-fly map switching: 4 slots per stage, each with its own fuel quality (pump gas or a fixed ethanol blend such as E30) and a power level from 100% down to 50% in 5% steps; with the flex fuel option and hardware installed, four pump-gas maps can be set up for non-ethanol refills
- Antilag: hold the steering-wheel volume-down button (or the cruise stalk) toward you and apply heavy throttle, then release to launch; coolant temp, EGT, maximum duration and cooldown safeties; adjustable boost target for OTS users
- Switchable burble aggressiveness and duration per map slot
- On-the-fly exhaust flap control (always open, always closed with opening under high load, or OEM) from the MHD+ Live Menu
- Ethanol content quick view in the MHD+ Live Menu when a compatible ethanol content analyzer is installed
- Motiv ReFlex integration: full 2-way CANBUS integration, including DME limp on PI injector error and DME control of external wastegates
- Overrun brap noise on lift-off after acceleration
- No Lift Shift on 6-speed manual cars: full-throttle shifts without lifting off the accelerator (the clutch must still be pressed)
- PI safety (coil cut): stops a cylinder's coil from firing when the DME cuts its injection, so a lean, port-injection-only mixture is not ignited
Monitor and diagnostics
- Configurable gauge layout with up to 8 fully adjustable gauges
- 50+ engine parameters available at a glance and logged in the background
- Datalogging to standard CSV files with a built-in log viewer; free log analysis offered by MHD
- Available monitors include boost, boost target, lambda (AFR), intake air temp, ignition timing per cylinder, coolant temp, oil temp, oil pressure, transmission temp, HPFP, throttle position, wastegate duty cycle, RPM, speed and EGT
- Advanced parameters not exposed by BMW, such as timing corrections per cylinder, boost setpoint and active torque limiter (availability depends on DME software version if the car is not flashed with MHD)
- Read / delete engine fault codes and reset adaptations
- Return to the factory OEM flash at any time; no initial backup required
- Custom tuner maps and JB4 backend maps can be loaded in addition to the MHD OTS maps
PARTS INCLUDED
- One MHD Super License activation code, delivered by e-mail within 12 hours of payment during business hours
- License is issued against a single vehicle VIN and your MHD account e-mail, and is not transferable to another car, owner or account
- Flasher license (MHD OTS maps, JB4 backend maps and custom tuner maps)
- Monitor license (gauges, 50+ live parameters, CSV datalogging and log viewer)
- All three MHD N55 E-Series map packs, including the E30 ethanol blend map
- MHD+ custom code features
- Free MHD app download from the Apple App Store or Google Play
- No hardware is included with the license-only variant. The bundle variant on this listing adds the MHD Universal WiFi adapter.
TECH RESOURCES
Additional Parts Required
- MHD Universal WIFI Adapter — required to flash. The license is software only; you must have a supported interface to connect the app to the car. Not included with the license-only variant of this listing.
- Alternative supported interface if you already own one: K-DCAN cable plus an OTG adapter (Android only). MHD recommends its own WiFi adapter and cannot support third-party hardware.
- An Apple iOS 10.2+ or Android 6+ mobile device running the free MHD Flasher app — supplied by the customer.
- A free MHD account. Give us the account e-mail and the vehicle VIN at checkout; the license is bound to both.
- A battery charger or maintainer. MHD states a charger is highly recommended for the initial full write (install and uninstall) and for long writes on slower adapters.
- No DME unlock is required for the N55 E Series platform.
- Optional — to use the MHD+ flex fuel and ethanol content features you also need a compatible ethanol content analyzer. Speed Logic stocks the MHD FlexFuel Kit (Open Wire), which covers E-Series N55 cars.
Installation
- Step-by-step guide to setup, flashing, datalogging and returning to stock: Speed Logic MHD Tuning Guide (it links to every section of MHD's own user guide)
- Installation is performed by the customer through the MHD app over the OBD-II port; no workshop fitment is required.
Notes
- All purchases are final. MHD licenses are non-refundable and non-transferable.
- Your activation code is e-mailed within 12 hours of payment during business hours.
- Each license is tied to one vehicle VIN and one MHD account e-mail. A different car or account needs a new license.
- For E-Series N55 cars only. F-Series N55 cars (F30 335i, F10 535i and others) need the MHD Super License – N55 F-Series.
- xDrive models are supported.
- For off-road use only.
- Not sure? Send us your VIN and we'll confirm fitment and any unlock needs before you order.
VEHICLE APPLICATIONS
| Make | Model | Chassis | Engine | Years |
|---|---|---|---|---|
| BMW | 135i Coupe | E82 | N55 3.0L Turbo I6 | 2011–2013 |
| BMW | 135i Convertible | E88 | N55 3.0L Turbo I6 | 2011–2013 |
| BMW | 135is Coupe | E82 | N55 3.0L Turbo I6 | 2013 |
| BMW | 135is Convertible | E88 | N55 3.0L Turbo I6 | 2013 |
| BMW | 335i / 335i xDrive Sedan | E90 | N55 3.0L Turbo I6 | 2011 |
| BMW | 335i / 335i xDrive Coupe | E92 | N55 3.0L Turbo I6 | 2011–2013 |
| BMW | 335i Convertible | E93 | N55 3.0L Turbo I6 | 2011–2013 |
| BMW | X1 xDrive35i | E84 | N55 3.0L Turbo I6 | 2013–2015 |
| BMW | X5 xDrive35i | E70 | N55 3.0L Turbo I6 | 2011–2013 |
| BMW | X6 xDrive35i | E71 | N55 3.0L Turbo I6 | 2011–2014 |
Years are US model years. F-Series N55 cars need the MHD N55 F-Series license. Confirm your exact model and build date with Speed Logic by VIN before ordering.